Nucor (NUE) Q1 2018 Earnings Conference Call Transcript

Nucor (NUE -1.04%)
Q1 2018 Earnings Conference Call
April 19, 2018 2:00 p.m. ET

Contents:

• Prepared Remarks
• Questions and Answers
• Call Participants

Prepared Remarks:

Operator

Good day, everyone, and welcome to the Nucor Corporation First-Quarter of 2018 Earnings Call. As a reminder, today's call is being recorded. [Operator instructions] Certain statements made during the conference call will be forward-looking statements that involve risks and uncertainties. The word we expect, believe, anticipate, and various of other such words and similar expressions are intended to identify those forward-looking statements, which are based on management's current expectations and information that is currently available.

Although Nucor believes that -- believes they are based on a reasonable assumption, there are -- there can be no assurance that future events will not affect the accuracy. More information about the risks and uncertainties related to these forward-looking statements may be found in the Nucor's latest 10-K and subsequently filed 10-Qs, which are available on the SEC's and Nucor's website. The forward-looking statements made in this conference call speak only as of the date, and Nucor does not assume any obligation to update them, either as a result of new information, future events or otherwise. For opening remarks and introductions, I would like to turn the call over to John Ferriola, chairman, chief executive officer, president of Nucor Corporation.

Please go ahead.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Good afternoon. Thank you for joining us for our conference call. We appreciate your interest in Nucor. Joining me for today's call are the other members of Nucor's executive team, Jim Darsey, responsible for raw materials; Jim Frias, our chief financial officer; Ladd Hall, responsible for sheet and tubular products; Ray Napolitan, responsible for engineered bar products; Joe Stratman, our chief digital officer; Dave Sumoski, responsible for merchant bar and rebar products; Leon Topalian, responsible for beam and plate products; and Chad Utermark, responsible for fabricated construction products.

Earlier this week, Jim Darsey announced his plans to retire from Nucor on June 9 after 39 years of outstanding service to Nucor. Jim has been an exceptional leader. He has made strong contributions in each of our three major businesses, downstream products, steelmaking, and raw materials. Jim, thank you for your outstanding contribution to Nucor's long-term record of profitable growth and to our company's unique culture, which is unquestionably our greatest asset.

Effective June 10, Craig Feldman will be promoted to executive vice president of raw materials. Craig is a proven Nucor leader with 33 years of experience with the David J. Joseph Company. He is well-prepared to continue Nucor's profitable growth in raw materials.

Before we review Nucor's first quarter of 2018 results and strategic execution, I would like to share my view on our team's performance. The Nucor team is delivering profitable growth. It is long-term growth built on a solid foundation of sustainability. It is growth that creates value for Nucor's customers, employees, and shareholders.

It is driven by disciplined execution of our five drivers to profitable growth. Here are the five drivers the Nucor team utilizes to create value: 1) being a low-cost producer, striving for continual improvement in everything we do; 2) being a market leader in the markets in which we compete; 3) moving up the value chain to expand our capabilities for our value-appreciative customers; 4) expanding our channels to market; and 5) achieving commercial excellence to complement our traditional operational strength. I also want to highlight another important point regarding the current debate over our government's trade policies. What some people forget is that free trade does not mean free-for-all trade.

There are rules, rules that have been agreed to and adopted by all nations of the international trading community. It is critical that these agreements and the trade laws are rigorously enforced. Enforcing them ensures that everyone is playing by the same rules. Nucor thrives in a marketplace where winners are determined by real economic advantage, not by artificial and unlawful advantages.

Our ability to create value for our customers increases when we are able to compete on a level playing field. For that reason, Nucor applauds the ongoing work of the U.S. government to address the massive volume of dumped and illegally subsidized steel products that have been flooding into our country at historic levels. Jim Frias will now review Nucor's first-quarter performance and financial position.

Following those comments, I will update you on the execution of our strategy for long-term profitable growth. Jim?

James D. Frias -- Chief Financial Officer

Thanks, John. Nucor reported first quarter of 2018 earnings of $1.10 per diluted share. As indicated in our guidance last month, first-quarter results included an expense of $0.07 per diluted share related to the write-off of certain deferred-tax assets. Earnings momentum accelerated during the first quarter, especially at our steelmaking operations, with significant metal margin expansion during the month of March.

This momentum was partially offset or deferred by the timing impact of Nucor's significant vertical integration. Comparing the first quarter of 2018 to the fourth quarter of 2017, intercompany inventory eliminations resulted in an adverse swing of about $70 million on Nucor's pre-tax profits. Our strong improvement in first-quarter earnings before taxes from the fourth quarter highlighted the value we derive from Nucor's product breadth. In addition to significantly higher quarter-over-quarter profitability at our sheet mills, strong gains were achieved by a large percentage of our broad portfolio, including engineered bar, merchant bar and rebar, structural steel, plate steel, tubular products, cold finish bar, and our raw-materials businesses.

Our steel mills benefited from higher levels of capacity utilization and significant margin expansion. Earnings of the raw materials segment increased on a year-over-year and quarter-over-quarter basis, driven by improvements at both our scrap operations and our DRI production facilities. Here are some noteworthy raw-materials performance highlights: The David J. Joseph scrap business reported its strongest quarterly profits since the third quarter of 2008.

Our DRI plant in Trinidad, building on its record production and profit performance in 2017, posted solid first-quarter earnings. The Louisiana DRI facility achieved consistent operations while delivering its second-highest quarterly production shipments and earnings. We are encouraged by the Louisiana team's heightened focus on the key elements of execution, people, process, and equipment. Substantial work remains ahead for the team, but we are very confident in our improvement plans and the people implementing them.

Our first quarter of 2018 earnings also benefited from tax reform legislation that was effective this year. Excluding earnings attributable to non-controlling interest and the one-time write-off of deferred tax assets, the effective tax rate for the first quarter was 23.3%. Nucor's financial position is strong. With total debt outstanding of $3.8 billion, our gross debt-to-capital ratio was 29% at the end of the first quarter of 2018.

Nucor's strong liquidity position includes our cash holdings of $760 million and our $1.5 billion unsecured revolving credit facility, which remains undrawn. The facility's maturity was recently extended to April of 2023. For 2018, we estimate capital expenditures of approximately $1 billion. That represents a large increase from 2017 capital spending of $450 million.

Approximately two-thirds of planned 2018 capital expenditures are for expansion, product improvement and cost savings projects, with the remaining one-third for maintenance purposes. Nucor's capital allocation priorities are clear, and they've been consistently practiced over many years. Our first priority is to invest for profitable growth. Our growth strategy is simple and flexible, leveraging our five drivers to profitable growth.

Our second priority is to return cash to our shareholders, primarily with cash dividends consistent with our success in delivering long-term earnings growth. Our third priority is to opportunistically repurchase our stock when our cash position is strong and our shares are attractively priced. We intend to continue Nucor's long-term history of being effective stewards of our shareholders' valuable capital. Our conservative financial practices and highly variable cost structure allow us to invest for future growth and provide value to our shareholders in both good times and bad.

Over the challenging nine-year period from 2009 through 2017, Nucor returned $4.4 billion to our shareholders through dividends and share repurchases, while over the same time period, investing $8.3 billion in attractive growth opportunities. Nucor generally targets to return a minimum of 40% of its through-the-cycle earnings to shareholders by regular dividends, supplemental dividends, and opportunistic share repurchases. Earnings in the second quarter of 2018 are expected to increase significantly compared to the first quarter. Orders and backlog are robust throughout Nucor's portfolio of steel and steel products businesses.

We believe there is sustainable strength in steel end-use markets. Nucor's focus remains on delivering high returns on our invested capital by taking care of our customers. Thank you for your interest in our company. John?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Thanks, Jim. Nucor's disciplined strategy of profitable growth is working. Our 2017 earnings were Nucor's highest annual earnings since the cyclical peak year of 2008. That positive momentum has carried over into 2018, as evidenced by our strong first-quarter earnings and a bullish second-quarter outlook.

We are seeing stronger demand throughout the U.S. economy. Recent tax and regulatory reforms have reduced uncertainty and improved confidence. As a result, we are seeing a robust pipeline of projects and strong overall business activity.

Twenty-one of the 24 end-use markets served by Nucor are experiencing stable to improving demand. End markets that are particularly important to Nucor are especially strong in 2018, including energy, most of the construction markets Nucor serves and heavy equipment. With this improved demand, the Nucor team is only beginning to realize the significant pent-up earnings power from investments made during the economic downturn. As Jim just noted, Nucor invested more than $8 billion over the nine-year period running from 2009 through 2017.

Here is just one example of how our investments are paying off. Nucor Tubular Products, acquired in late 2016 and early 2017, continues to generate strong volume and better-than-expected earnings. Our tubular and sheet mill teammates are working together very effectively to achieve synergies that allow Nucor to better serve customers in the construction market with our broader product offerings. The tubular team has embraced Nucor's pay-for-performance system and set first-quarter production records.

At the same time, our sheet mills continue to benefit from profitable base-load tons from the Nucor Tubular facilities. Nucor's sheet mill shipments to this value-added channel to market are expected to grow from 720,000 tons in 2017 to more than 1 million tons in 2018. With these improvements in market demand, Nucor is primed and ready to create increased value for our shareholders. We are doing it by leveraging our significant product offerings and an unrelenting focus on achieving commercial excellence in taking care of our customers.

While reviewing Nucor's performance in 2017 and early 2018, it is important to examine the steel industry environment in which we are achieving strong volume and earnings growth. Specifically, illegally traded imports remain a very serious and yet-to-be-resolved challenge. Finished steel imports in 2017 captured 27% of the U.S. market.

In the first quarter, they remained at relatively high levels, estimated to be 25% of market share. Nucor will continue to fight aggressively for free and fair trade. The Nucor team continues to develop attractive opportunities for profitable growth. Currently, we are executing seven exciting growth initiatives that total about $1.3 billion in invested capital.

Three of the projects are in our sheet business, a $230 million specialty cold-rolling facility at our Arkansas sheet mill with about 500,000 tons of annual capacity and scheduled for start-up in the first half of 2019. It will greatly expand our capabilities to serve the light-weighting needs of the automotive market; a $176 million hot band galvanizing line at our Kentucky sheet mill with 500,000 tons of estimated annual capacity and set for start-up in the first half of 2019. It will expand our share of the Midwest coated-sheet market and support further expansion into automotive products; a $270 million sheet galvanizing facility in Mexico being constructed with our joint venture partner, JFE Steel, with approximately 400,000 tons of annual capacity and on track for a production start in the second half of 2019. It is centrally located to serve Mexico's growing automotive market and will obtain half of its substrate from our Berkeley sheet mill.

The other four of these projects are in our long-products business: an $85 million modernization of the rolling mill at our Ohio rebar mill with about 400,000 tons of annual capacity and completion expected in the first half of 2019. This project enhances our low-cost producer and market-leadership position in the Ohio market; a $180 million merchant bar rolling facility at our Illinois bar mill with 500,000 tons of estimated annual capacity and a production start date expected in late 2019. We will benefit on multiple logistical advantages and will displace tons supplied by competitors outside the region; a $250 million rebar micro mill outside of Kansas City, Missouri, with about 350,000 tons of annual capacity and a start-up set for late 2019; a $240 million rebar micro mill in central Florida with 350,000 tons of estimated annual capacity and a start-up expected in the first half of 2020. These micro mills are also a logistics play that expands Nucor market leadership and a low-cost producer position in the rebar business.

For a company such as Nucor, with our unique position of strength and our proven ability to execute profitable growth strategies, this is a time of great opportunity. Our team is both ready and eager to demonstrate the pent-up earnings power that we have built into our company during our industry's downturn. As always, the more than 25,000 men and women of Nucor are the reason that Nucor's best years are still ahead of us. Nucor's senior leadership team in Charlotte would like to thank all of our teammates throughout Nucor for working together to build a safer, stronger, and more profitable Nucor.

Thank you. We would now be happy to answer your questions.

Questions and Answers:

Operator

[Operator instructions] We'll take our first question from Martin Englert with Jefferies.

Martin Englert -- Jefferies -- Vice President

Hi, good afternoon, everyone, and congratulations on the strong results.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Good afternoon. Thank you.

Martin Englert -- Jefferies -- Vice President

there is a notable improvement within the raw-material segment of profitability, and you touched on this in the release and then some of your commentary. But can you discuss what's changed at the Louisiana DRI facility and what incremental work you have planned there?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Yes, I'd be happy to. The improvement in the raw-materials segment was twofold. D. J.

Joseph team did a good job during the first quarter. They contributed to the good results in the first quarter, so we thank them for all that hard work. And in Louisiana, they had a very good quarter in terms of production and shipments and profit. It's the second-best quarter ever.

So good work, and congratulations and thanks to the team there. In terms of what are we doing, it's really a focus -- and I mentioned it briefly in terms of people, process, and equipment. And it's a focus on making sure -- to focus on making sure that we take care of the details that we know how to take care of on a steel plant and on an iron plant. And that's focusing on things like preventive maintenance, taking care of the equipment the way we should be taking care of the equipment, and training.

Training the teammates to make sure that they're ready for the -- all of the situations that can occur in the DRI facility. And that's paid big dividends. We are still doing a detailed examination, investigation into the equipment, and we're not ready to talk about what modifications we'll have to make to the equipment in that facility right now. We should be ready maybe by the next fall, sometime around the middle of the year, toward the end of the year.

We'll have completed the engineering study and we can talk to you more about the equipment changes or modifications that we need to make. But we're pleased with what the team is doing. I will point out that I mentioned the focus on preventive maintenance. And in the second quarter, around July -- June 18, I think is the exact date, we will be taking the facility down for 30 days.

This is a practice that we've done forever in Trinidad, and it's taken down to perform the annual preventive maintenance so that we can ensure greater reliability for the rest of the year when we're running. So that will be taking place in the second quarter. And it's part of our renewed focus on people, process and maintaining the equipment in the way that it should be maintained.

Martin Englert -- Jefferies -- Vice President

Thanks for all the detail there. Within the downstream steel products segment, can you discuss some of the margin trends that you're seeing maybe on a more granular level such as rebar fabrication given the rising substrate cost?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, Chad, I'll let you start with that. And Chad is in charge of our downstream businesses. So Chad, why don't you take first shot at that?

D. Chad Utermark -- Executive Vice President

Yes. Thanks, John. Our backlogs on our downstream fabricated businesses remain very healthy. They are growing.

We continue to see strong end-use demand across our portfolio of downstream products. Year-over-year quotes, orders, and backlogs are up significantly. Yes, we have experienced some margin compression resulting from the recent increase in steel pricing. However, each of our downstream fabricated businesses are responsible for selling value and being profitable.

So overall, our current backlog remains profitable in this current steel-pricing environment.

Martin Englert -- Jefferies -- Vice President

OK. Excellent. Thanks for the details.

Operator

And we'll take our next question from Curt Woodworth with Credit Suisse. Please go ahead.

Curt Woodworth -- Credit Suisse -- Director

Yes. Good afternoon, everyone.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Good afternoon.

Curt Woodworth -- Credit Suisse -- Director

Maybe to start, John, on the rebar expansion. So 700,000 tons. I think on my numbers, it's about 7% addition to U.S. supply.

But by the same vein, imports were down over 1 million tons annualized the last four months. The AISI data is running up, I think, close to 900,000 on domestic shipment recovery. So can you talk to the decision around doing two micro mills, say, instead of 1? How do you see Turkey and kind of exemption risk playing into that? Was 232 part of your thought process at all in terms of allocating more capital to rebar? And can you comment on what your rebar utilization rate was this quarter?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, let me start. There are several questions in there, but let me start by talking in general about the strategy that surrounded the decision to build two micro mills. I mentioned this in the last call, but it's all began with a detailed market study and a market analysis that we did both of rebar and merchant product throughout the United States. And the conclusion that we came to was twofold.

No. 1, we recognized that we didn't have all of our production in the right locations. So we had to do a little bit of rationalization, a little bit of switching some of our products and some of the locations in which we produce that product so that we could better serve the local markets surrounding those facilities and take advantage of logistical costs. And when we did that, we realized that that gave us an opportunity in two areas, one in Florida and one in Missouri, right near the Sedalia area, where we saw pockets of market demand for rebar that were currently being served by competitors outside that market.

So when we looked at this, we said there's three things we are looking to accomplish and we believe we will accomplish when we start up those facilities. No. 1, obviously, we're going to be adding to our footprint and we give better coverage to our customers on a national-footprint basis. No.

2, it's a better rationalization of our mills. We'll be producing the products at the mill most appropriate to produce it from a logistics perspective and from a scrap-availability perspective. And then No. 3, specific to those three micro mills, being located in regions where currently the market is being served by competitors outside the local region and in areas where we have a good supply of scrap that's under our control through the David J.

Joseph Company. So we expect to have a significant logistical advantage both on the scrap side and on the shipment to the customer side. So that was a strategy behind the decision to go with building the two micro mills. Now certainly, the fact that we have -- still have confidence that 232 will have an impact on the level of imports of rebar coming into the country, that certainly plays into it.

That gives us a little bit level -- additional level of confidence in the success of these mills, but it was really driven by the point that I mentioned earlier.

James D. Frias -- Chief Financial Officer

John, one other thing that's maybe worth adding is the idea that Kankakee is going to shift its product mix with some of the investments we're making there to make more merchants. And right now, they're primarily a rebar mill. So while we're adding rebar in one place, we're taking spring bar out in another.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

And that plays to what we've talked about. We're really doing a study and taking a look at making sure that we produce the products that the market demands in the area that they are being produced. So I'd tell you, we did -- I applaud our teams on both the rebar and the merchant side. They did a great job on the market analysis, and I'm confident that we're going to be in a much better position to serve the market and improve our margins at the same time.

Curt Woodworth -- Credit Suisse -- Director

OK, that's helpful. And then just a follow-up with regards to -- the comment that metal spread, the exit rate. Obviously, 1Q is significantly higher than the average or where you started. Can you give us a sense on potential upside to metal spreads or maybe where the March level was versus the quarter so we can get a better sense for how it could look 2Q?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, as we went through the first quarter, we were still seeing the price of scrap increasing, and we -- and when you look at the rate in which the scrap price was increasing during the first quarter and at the same time, the slower rate that the CRU was advancing as pricing was moving up, you saw some of the margins begin to improve toward the end of the quarter. We think scrap now has pretty much stabilized as we look at scrap going forward. We see it, particularly on the obsolete side, maybe down a little bit, but certainly stabilized. On the prime side, probably more stable.

Not too much down movement, but stable. And we believe that based upon our contracts, as we look forward into the second quarter, we see pricing continuing to improve on our contract business and on our spot business. With stable scrap pricing and increasing selling price, we should see margin expansion as we move into the second quarter.

Curt Woodworth -- Credit Suisse -- Director

Understood. Thanks, guys.

Operator

And we'll take our next question from Timna Tanners with Bank of America Merrill Lynch. Please go ahead.

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

Yes, Hey, good afternoon, everyone.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Good afternoon, Timna.

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

I wanted to delve into a little bit further, the build-out of galvanized. And I know maybe it's a bit -- that's been a longer-term philosophy and plan, but the hot-rolled market is particularly tight and the galvanized premiums have been coming down. Who supplies hot-rolled when Nucor ships more into value-add? Is there not an opportunity for Nucor to also supply that market? So I guess, that's one question about galvanized versus hot-rolled and that opportunity. But in line with that, just wondering, how do we think about Nucor's opportunity to take share in light of falling imports in the sheet market?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

OK. Well, let me start with the first question, and you hit the question about galvanizing. We believe it's been a long-term strategy of ours to improve the value-added products out of our sheet business. And when you look at projects we've got going on today with the galv line in Mexico, the galv line at Gallatin and the cold mill at Hickman, value-added products coming out of our sheet mill will improve by about 10%.

So it'll go somewhere -- today, it's somewhere in the neighborhood of about 37% value added. That will go up to about 47%. We think that that's an important long-term strategy. You mentioned about the hot band.

And certainly, as I've said before, we always think of our investments in terms of long term. Yes, right now, hot band is strong. There's some pressure on hot band, so pricing looks good on hot band. But over the course of this -- of the cycle, we think value-added products always give us a little bit better margin.

And as to your second question, which was about who's going to produce the hot band needed to galvanize if we move more of our product from hot banded to galvanized, that's an easy answer. We challenge our teams to produce more hot bands on the mills that we have, OK? And if we see an opportunity in the future, we'll take the appropriate actions and -- to meet the needs of the market through investments. So we don't see that as an issue. So we're confident in both of those things.

One of the key things that I would mention that, again, when you look at hot band, cold-rolled and galvanized, is making sure that we maintain that diversity so that we have the flexibility to move as the market shifts. You know our business. It goes up and down in hot band, cold-rolled and galv. And we want to have the ability to produce the products that are needed, whatever the market -- the given market is at the given time.

So that's why we're moving in that direction.

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

OK, great. And then I want to shift gears and ask you a little bit about the balance sheet. I know over the years, you've held a really large cash position and this quarter is unusually light. Can you just talk to us about maybe your philosophy there? What's the minimum level of cash necessary in the balance sheet? Are you changing your view there? Certainly, there's a big inventory build, so maybe that was just temporary.

But if you wouldn't mind expanding a bit on the balance sheet. Thanks.

James D. Frias -- Chief Financial Officer

Sure. I'll talk about that, Timna. We're constantly analyzing market conditions, our balance sheet, and our future plans. We think of our minimum cash balance as being probably in the neighborhood of $500 million.

So we're not there. And of course, with our strong credit rating, we have a lot of flexibility on how we respond to cash needs.

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

Can you comment on the inventory build then, perhaps? Is that just a seasonal phenomenon maybe with the rising price and --

James D. Frias -- Chief Financial Officer

Yes, that's a good question. Working capital, in general, for our business always goes up countercyclically. So when prices go up for scrap and prices go up for our selling prices, both inventories and receivables build, and we're seeing that right now. And of course, the opposite happens.

So if you looked at our free cash flow and our cash from operations, our cash from operations, particularly in 2015, when energy prices collapsed and the sheet market faced more challenging times, again, that number was $2 billion of cash from operations. So right now, in an up cycle, working capital is using more cash. That's just kind of common.

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

Ok. Makes sense. Thanks again.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Thank you.

Operator

And we'll take our next question from Novid Rassouli with Cowen and Company.

Novid Rassouli -- Cowen & Company -- Vice President

Hi, guys. Thanks for taking my questions. I'm just wondering if you can discuss your expectations for May imports given the Section 232 exemption is set to expire on May 1. Obviously, those would be imports coming in or being licensed two to three months ago.

So arguably, we could see a steep drop-off given the lack of clarity. Just wanted to get your guys' thoughts around that.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, there certainly is a lack of clarity. There's no doubt about that. And it's tough to answer that question without knowing exactly what's going to happen. So let me tell you what we certainly hope and what we expect to happen given the president's commitments to our industry.

No. 1, we need and we expect May 1 to be a firm date. There needs to be no more delays, no more extensions on this. And it needs to be where -- he's promised that if we can't come to some reasonable renegotiated agreements, then we hold firm with a 25% tariff applied to the countries that have not been exempted.

But we hope that is the case. It's hard to predict what's going to happen with the imports. Hopefully, as I said, we -- March -- the May -- excuse me, the May 1 day is firm. And then we would expect to see one or two things happen: either imports would go down or if the demand in our country necessitates it, imports would continue, but they would continue at the fair market price having paid the 25% tariff.

So one of the things that I hear a lot of about and there's concern about is shortage of steel in the future after the May 1 date. And I can assure you, there's going to be no shortage. There's a tightness in the marketplace certainly. That's a result of demand improvement.

The economy is better. Demand is up. Tax reform has contributed to that. Deregulation has contributed to that.

And to some extent, the partial implementation of the 232 has contributed to that. But the result -- the bottom line is demand has gone up. If steel needs to come into the country, it will come in. People will pay the tariff, and they'll bring the product in, and they'll bring it in at a fair price.

I like to say that I can -- I'm confident that there's not going to be a shortage of steel in this country. There might be a shortage of dumped or illegally traded steel in the country, but there will not be a shortage of steel.

Novid Rassouli -- Cowen & Company -- Vice President

So is it safe to say that as far as conversations with your customers, nobody's panicking or trying to secure greater tonnage with you guys post-May 1?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

No. We -- when we talk to our customers, they -- and we ask them quite frankly, "Do you see a shortage or do you see a tightening?" And the answer we get is, "We see a tightening." And as I mentioned, the tightening is a result of a lot of things. But primarily, demand is up. I would point to when you look at our utilization rates last year and the first quarter of last year, they were already fairly high.

And when you look at the utilization rates in the first quarter of this year, it's a little bit higher, a couple of percentage points, 3 or 4 percentage points higher. So our customers have confidence on our ability to supply them, and we won't let them down.

Novid Rassouli -- Cowen & Company -- Vice President

Got it. And just one more follow-up, if I may. On scrap, you had mentioned that you think that scrap has basically stabilized. But meanwhile, we've been seeing Turkish scrap prices drifting lower over the past month.

U.S. scrap sentiment was fairly bullish about a month ago, and then the April increase in prices kind of fell short of expectations. Just wanted to see if the weakness abroad has been impacting the U.S. market at all or if you think it could.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, that certainly impacts -- that absolutely does impact the U.S. market. But I'd also add to it, we're coming into spring. The scrap flows a little bit better in the spring, but they're particularly obsolete.

On the prime side, I've -- we'll take a little credit and brag on the fact that we think the DRI facility, running so well as it did in the first quarter, contributes to putting a cap on the prime scrap number. So yes, the reduced exports and the improved flow of scrap in the United States because of spring, we think that's the primary reasons that the obsolete will be stable to down. And given the DRI and other alternative materials coming into the country today, prime scrap we think will be pretty stable going forward also.

Novid Rassouli -- Cowen & Company -- Vice President

Great. Thank you.

Operator

And we will take our last question from Phil Gibbs with KeyBanc Capital Markets. Please go ahead

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

Hey, good afternoon.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Good afternoon, Phil. How are you?

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

Doing well, John. How are you?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Very well. Thank you.

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

Good. Jim, you had mentioned I think in your script that there was a certain lag impact. I just wanted to be certain that I heard that correctly and what that may have been.

James D. Frias -- Chief Financial Officer

Regards to -- I don't remember having the words a lag impact. So you must be reading something in between the lines. You're talking about the momentum of margins as we went through the quarter?

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

No. I thought you had mentioned something -- well, it was maybe along the lines of a $70 million [Inaudible].

James D. Frias -- Chief Financial Officer

Yes, yes. So our corporate/elims line has a number of components. It includes interest expense, corporate overhead, intercompany profit, eliminations and then incentive-based compensation. And I was speaking to one subcomponent of that line, and that's intercompany profit.

And if we compare the fourth quarter of last year to the first quarter of this year, it was a $70 million drag by comparison, and that should be lower in the second quarter.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Eliminations.

James D. Frias -- Chief Financial Officer

Yes, intercompany eliminations.

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

OK. What was the thought in reclassifying some of the tubular and piling businesses?

James D. Frias -- Chief Financial Officer

Yes, that's a good question, too. Last year was the first year where we had both piling and tubular in that steel-products segment together in our 10-K. And we got feedback from a number of investors that said, "It seems to us that makes more sense in steel products than in steel mills." And so we reevaluated and decided that was probably a better answer, and so we made that move.

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

OK. And then, John, I've got a question regarding this geopolitical situation in Russia. I know they're a big supplier to the U.S. of pig iron.

Does that put more of a premium on the DRI operational execution, I guess, is one part of that comment that I'm making here. And then, do you see a potential issue coming out of there just given everything that we're seeing going on in terms of the noise right now?

John J. Ferriola -- Chairman, Chief Executive Officer, and President

No. It's impossible to predict what's going to happen on the geopolitical front. That goes without saying. But what we feel very good about here at Nucor is that we have options.

We have flexibility regardless of what happens. If you do see something happen on the pig iron side, we have the DRI that we can count on. Also having the great organization of D. J.

Joseph as part of the Nucor family. That gives us a great deal of advantage, frankly, in terms of being able to secure scrap not only domestically, but frankly, from around the world, source alternative iron units from other places in the world. They've got contacts all over the world. So one of the things -- or the advantage that we have is that we've got options that we can take advantage of if something does happen in any one particular region of the world.

We've got options both internal to our own company and through the David J. Joseph Company externally bringing iron units into our country. We don't worry too much about that.

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

OK, terrific. And just one last question from maybe a commercial-operational standpoint. Where do you see your backlogs on the steel side on a product basis, maybe the longest or the tightest? And where might be there some shorter leads or weaker spots? Just trying to gauge the -- where we are in terms of the strength of the products.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Well, I'm not going to go product by product, that's the worst, but I will say that in terms of the tightest market we see right now is our sheet product, and maybe make a more general statement and say in our flat products because plate is also pretty tight right now. So flat products, tighter. Long products, not as tight, although we do see some tightness in our structural market also. So with the exception of structural, long products are a little bit looser.

Flat products are tighter.

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

Thanks, John. I appreciate it.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Hey, thank you.

Operator

And that does conclude our question-and-answer session. I would like to turn the conference call back over to John Ferriola for any additional or closing comments.

John J. Ferriola -- Chairman, Chief Executive Officer, and President

Thank you, Ashley. Well, let me close by saying thank you to our customers. We appreciate the opportunity to partner with you and to earn your business every day. And always know that Nucor stands ready to seize new opportunities with you.

And I want to say thank you to our shareholders. We appreciate your ongoing confidence in our team. And finally, to my Nucor teammates, let's keep it going. Let's keep winning together.

I'm confident our best years are still ahead of us. I want to thank you for what you do for Nucor every day. And most importantly, thank you for doing it safely. There is nothing more important than safety.

Absolutely nothing. Thank you all for your interest in Nucor. Have a great day.

Operator

[Operator signoff]

Duration: 45 minutes

Call Participants:

John J. Ferriola -- Chairman, Chief Executive Officer, and President

James D. Frias -- Chief Financial Officer

Martin Englert -- Jefferies -- Vice President

D. Chad Utermark -- Executive Vice President

Curt Woodworth -- Credit Suisse -- Director

Timna Tanners -- Bank of America Merrill Lynch -- Analyst

Novid Rassouli -- Cowen & Company -- Vice President

Phil Gibbs -- KeyBanc Capital Markets -- Vice President

More NUE analysis

This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company's SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.