FormFactor, inc (FORM) Q3 2021 Earnings Call Transcript

Image source: The Motley Fool.

FormFactor, inc (FORM 3.62%)
Q3 2021 Earnings Call
Oct 27, 2021, 4:25 p.m. ET

Contents:

• Prepared Remarks
• Questions and Answers
• Call Participants

Prepared Remarks:

Operator

Thank you, and welcome, everyone, to FormFactors Third Quarter 2021 Earnings Conference Call. On todays call are Chief Executive Officer, Mike Slessor; and Chief Financial Officer, Shai Shahar. Before we begin, Jason Cohen, the companys General Counsel, will remind you of some important information.

Jason Cohen -- Senior Vice President, General Counsel & Secretary

Thank you. Today, the company will be discussing GAAP P&L results and some important non-GAAP results intended to supplement your understanding of the companys financials. Reconciliations of GAAP to non-GAAP measures and other financial information are available in the press release issued today by the company and on the Investor Relations section of our website. Todays discussion contains forward-looking statements within the meaning of the federal securities laws. Examples of such forward-looking statements include those with respect to the projections of financial and business performance, future macroeconomic conditions; the benefits of acquisitions and investments in capacity and new technologies, the impacts of the COVID-19 pandemic, our supply chain, the impacts of regulatory changes; the anticipated demand for products; our ability to develop, produce and sell products and the assumptions upon which such statements are based. These statements are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed during this call. Information on risk factors and uncertainties is contained in our most recent filing on Form 10-K with the SEC for the fiscal year ended 2020 and in our other SEC filings which are available on the SECs website at www.sec.gov and in our press release issued today. Forward-looking statements are made as of today, October 27, 2021, and we assume no obligation to update them. With that, we will now turn the call over to FormFactors CEO, Mike Slessor.

Michael D. Slessor -- Chief Executive Officer & Director

Thanks, Jason, and thank you, everyone, for joining us today. FormFactor delivered solid results in the third quarter, again recording the second highest revenue in company history with gross margins at the high end of our outlook range. Together with sustained operating expense control, these factors resulted in non-GAAP earnings per share above the high end of our outlook range. We continue to benefit from strong demand from FormFactors diversified set of market-leading semiconductor test and measurement products. And with our added production capacity now coming online, were well positioned in the current quarter to deliver sequential growth. Like many companies in the semiconductor industry, were facing a variety of supply chain and labor challenges. Our long-term investments in automation and vertical integration have helped reduce the effect of these headwinds, and weve thus far successfully navigated these issues with minimal impact. We do expect this situation to persist into next year, and our team remains focused on actively resolving these challenges.

Minimizing impact where supply chain is especially important as our capacity investments start coming online. Tool installations and qualifications are now underway in our new Livermore Manufacturing Center, which remains on track to deliver initial customer shipments in the current quarter. Were excited to be on the cusp of commissioning this new flagship facility, which will remove a growth constraint weve operated under for almost two years, helping us to reach the $850 million revenue of our target financial model. Id like to provide some detail behind our sequential improvement in gross margins as it provides insight into the importance of the design specific product mix within each of our served markets. As you can see from the supplemental materials posted on our website and as Shai will review later, third quarter revenue by segment end market was very similar to the second quarter, yet we delivered a 160 basis point improvement in gross margins. The largest single factor in this improvement was a more favorable product mix within specific markets. As weve noted in the past, probe cards are consumables those specific to each customer chip design and the custom nature of each probe card design drives a different manufacturing cost and selling price. For example, two DRAM probe cards configured to test two different customer chip designs can produce significantly different gross margins because of the details of the probe card and tester configuration like the difference between a one touchdown configuration versus a two touchdown configuration.

Consequently, two quarters with similar revenues in each segment and market can and often do result in substantially different gross margins depending on the specific probe cards shift to produce that revenue. As variability is inherent to FormFactors broadly diversified design-specific consumables business. And since we serve major applications at all the leading customers in the semiconductor industry delivering probe cards to test hundreds of different chip designs each month. We expect to continue to see quarterly fluctuations of gross margin around a long-term trend line, expanding to the 47% of our target financial model. Turning now to segment and market level details. Foundry and Logic probe cards, our largest business, performed at levels in the third quarter comparable to the second quarter with an expected seasonal reduction in mobile application processor demand, offset by an increase in microprocessor demand and sustained strong growth in 5G RF applications. With 2021s large Foundry and Logic wafer fab equipment investments now coming online with our customers, were experiencing increasing demand for leading-edge foundry and logic probe cards. Along with our capacity additions, our customers are adding innovative advanced packaging architectures like EMIB, Foveros and 3D fabric to their road maps to help offset the slowing of front-end-driven Moores Law. As we discussed in the past, these chiplet or tile-based integration schemes drive both higher test intensity, which expands the number of probe cards required per wafer out and test complexity which widens FormFactors competitive advantage.

With lead times of less than a quarter, short-term visibility remains challenging as always, but the combination of significant customer capacity increases paired with their adoption of advanced packaging creates long-term demand for FormFactors probe card products. Demand for DRAM probe cards in the third quarter sustained near the high levels of the second quarter, and we expect comparable strength in the current quarter. As in Foundry and Logic, we experienced demand shifts between different customers and different chip designs across multiple DDR4 and DDR5 designs in both mobile and PC server applications. FormFactors ability to absorb these short-term fluctuations in demand from any one customer is the result of our long-term initiative to be a diversified market leader supplying all major DRAM manufacturers and remains a key tenet of our operational strategy in all of our served markets. Our Engineering Systems business also delivered good results in the third quarter, with gross margins at 50% for the first time since early 2020.

A highlight of the quarter was the shipment and installation of multiple FRT high-performance multisensor 300-millimeter optical metrology tools to a single foundry customer for advanced packaging applications. Advanced packaging is a key driver for all of FormFactors businesses as our customers begin to adopt chiplet style integration strategies to generate new test and measurement requirements. The FRT tools ability to quickly, accurately and non-destructively measure and control critical dimensions, film thicknesses and surface topologies on chiplet-to-chiplet interfaces is key to improving and maintaining advanced packaging assembly yields. Let me close by noting that with an accelerating demand outlook, increased capacity to meet that demand and good execution on both short- and long-term gross margin improvements, were well on the path to the target financial model we unveiled last year that delivers $2 of non-GAAP earnings per share on $850 million of revenue. Test and measurement is clearly gaining importance in the semiconductor industry, driven by powerful trends, including 5G, advanced packaging and memory content growth. Our leadership position in these attractive markets, paired with our differentiated strategy and disciplined execution will drive continued growth and share gains as we progress toward our target model. Shai, over to you.

Shai Shahar -- Chief Financial Officer

Thank you, Mike, and good afternoon. As you saw in our press release, and as Mike mentioned, third quarter revenues and non-GAAP gross margin were at the high end of our outlook range with revenues again reaching the second highest level in company history and non-GAAP EPS exceeded the high end of our outlook range. FormFactors third quarter revenues were $190 million, a 1% sequential increase in Q2 and an increase of 6.7% year-over-year. Probe card segment revenues were $155 million in the third quarter, a small increase of $1.2 million or 0.8% from Q2. As Mike mentioned, third quarter revenue by segment end market was very similar to the second quarter. Systems segment revenues was $35.1 million in Q3, an increase of $0.7 million or 2% from the second quarter, mainly as a result of higher sales of optical metrology and thermal systems, driven by advanced packaging and automotive applications. Within the probe card segment, Foundry and Logic revenues increased by $1 million from Q2 to $105 million in the third quarter, comprising 55% of total company revenues, same as in the second quarter. DRAM revenues were $40 million in Q3, a decrease of $2 million or 5.5% from the second quarter and were 21% of total quarterly revenues as compared to 22% of revenue in the second quarter. Flash revenues of $10 million in Q3 were $2.5 million higher than in the second quarter and were 6% of total revenues in Q3, up from 4% in Q2.

As we have said in the past, we expect Flash revenues to be lumpy from quarter-to-quarter. GAAP gross margin for the third quarter was 42.2% of revenues as compared to 40.6% in Q2. Cost of revenues included $7.2 million of GAAP to non-GAAP reconciling items, which we outlined in our press release issued today and in the reconciliation table available in the Investor Relations section of our website. On a non-GAAP basis, gross margin for the third quarter was 46% at the high end of our outlook range and 160 basis points higher than the 44.4% non-GAAP gross margin in Q2. As mentioned, third quarter revenue by segment end market was very similar to the second quarter, and most of the improvement in gross margins approximately 2/3 of it was a result of a more favorable product mix within the specific markets. Our probe card segment gross margin was 45.1% in the third quarter, an increase of 180 basis points compared to 43.3% in Q2. The increase is mainly due to the more favorable mix I just mentioned. Our Q3 Systems segment gross margin was 50%, 90 basis points higher than in the second quarter. As we have said previously, we expect our Systems segment gross margin to range between the high 40s to low 50s. Gross margin remains an area of focus for us, and we are encouraged by our progress toward our target financial model gross margin of 47%. As a reminder, we expect that margins will fluctuate from quarter-to-quarter, mainly as a result of changes in product mix. Our GAAP operating expenses were $57 million for the third quarter, $1 million higher than in the second quarter.

Non-GAAP operating expenses for the third quarter were $48.5 million or 25.5% of revenues, essentially flat with $48.4 million or 25.7% of revenues in Q2. Company noncash expenses for the third quarter included $7.9 million for stock-based compensation, $2.5 million for the amortization of acquisition-related intangibles and depreciation of $6.6 million. Amortization for acquisition-related intangibles decreased from $7.1 million in the second quarter and certain assets became fully amortized during Q2. The increase of depreciation from $6.6 million in Q2 reflects additional assets placed in service as part of our capacity expansions. As disclosed in an 8-K filed last month, we adopted restructuring plans during the third quarter to streamline and improve the efficiency and business effectiveness of our operations. We are consolidating certain manufacturing facilities, including moving operations into our new Livermore Manufacturing Center that we begin production in the current quarter. We expect these actions will be largely completed by the end of 2022. We estimate that these actions will reduce our cost structure by approximately $3 million to $4 million on an annualized basis, once the actions are fully implemented. Non-GAAP operating income for the third quarter was $39 million, $3.8 million higher than in the second quarter. GAAP net income for the third quarter was $20.5 million or $0.26 per fully diluted share compared to $17.9 million or $0.23 per fully diluted share in Q2.

The non-GAAP effective tax rate for the third quarter was 18.9%, effectively the same as the 18.7% in Q2 and within our anticipated non-GAAP effective tax rate for fiscal 2021 of 15% to 20%. As a reminder, our annual cash tax rate is expected to remain at 6% to 8% of non-GAAP pre-tax income until we fully utilize our remaining U.S.-based R&D credits. Third quarter non-GAAP net income was $31.6 million or $0.40 per fully diluted share compared to $28.4 million or $0.36 per fully diluted share in Q2. Moving to the balance sheet and cash flows. We generated $14 million of free cash flow in the third quarter compared to $16 million in Q2, and we have had total cash and investments of $268 million at the end of the quarter. The third quarter $2 million sequential decrease in free cash flow reflects an increase in capital expenditures. As of the end of the third quarter, we had two term loans remaining on our balance sheet, totaling $27 million. We invested $20 million in capital expenditures during the third quarter compared to $18 million in Q2. This brings our year-to-date capex to $51 million, chiefly related to the capacity expansion in our Livermore Manufacturing Center. We continue to make significant investments in capacity in 2021 and with most of the year behind us, we are fine-tuning the range for forecasted cash capex for the full year to $70 million to $80 million from the $70 million to $90 million previously communicated.

As a reminder, we expect capex to return to 3.5% to 4% of revenues in our target financial model after we conclude these capacity expansions. At quarter end, our total cash and investments balance exceeded the debt balance by $241 million, an increase of $11 million from Q2 quarter end. No significant share repurchases were made during the third quarter and year-to-date, we purchased 620,000 shares under our 2-year $50 million share repurchase plan. This brings our year-to-date share repurchase total to about 0.8% of our outstanding shares. The main purpose of the plan is to offset dilution from stock-based compensation. And at quarter end, $26 million remained available for future repurchases. Turning to fourth quarter non-GAAP outlook. As Mike mentioned, we expect generally strong demand to continue with sequentially higher Foundry and Logic and Systems revenue. These factors result in a Q4 revenue outlook in the range of $192 million to $204 million. Non-GAAP gross margins for the fourth quarter is expected to be in the range of 44% to 47%. At the midpoint of these outlook ranges, we expect Q4 operating expenses to be higher than Q3 by $1 million to $2 million, mainly due to increased investments in R&D and higher travel expenses as things start to get back to normal. Accordingly, non-GAAP earnings per fully diluted share for Q4 is expected to be between $0.37 and $0.45. A reconciliation of our GAAP to non-GAAP Q4 outlook is available on the Investor Relations section of our website and in our press release issued today. With that, lets open the call for questions. Operator?

Questions and Answers:

Operator

[Operator Instructions] Our first question comes from the line of Tom Diffely of D.A. Davidson. Your line is open.

Tom Diffely -- D.A. Davidson -- Analyst

Thank you. Good afternoon and nice results. Mike, just a couple of quick questions about the industry and how it relates to probe cards. If we spend $85 billion, $90 billion on capex this year, what is the timing over the next year or over the next years thats fully integrated into probe card business for you?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. Its an interesting question, Tom, and one that weve tried to highlight for people, obviously, 2021 is going to be an extremely strong record for wafer fab equipment. And what weve seen over the years is as those equipment gets delivered, installed, qualified, and then begins to produce designs, theres a 2- to 3-quarter lag between those equipment shipments and us seeing probe card demand. You can imagine it does take customers some degree of time to get the tools in, running qualified and be producing the specific designs that then require probe cards. And obviously, we continue to operate on very short lead times well within a quarter. So we are -- as part of the reason for our large capacity investments here in 2021 so that were ready as all of this WFE comes online and begins producing leading-edge designs, were ready to meet that probe card demand in 2022 and beyond.

Tom Diffely -- D.A. Davidson -- Analyst

Great. And then as a follow-up to that, Mike, when you look at the move from say, five nanometers to three nanometers or the move from FinFET to gate-all-around, what is the incremental opportunity for probe cards?

Michael D. Slessor -- Chief Executive Officer & Director

I dont know that theres a really big impact there, Tom. I mean, if we go back in history in Foundry and Logic as we went from planar to FinFET, it drove up test intensity somewhat at the beginning of that transition just because theres new defect modes that customers have to understand and drive the yield down. And so theyre going to test more and drive more data through the test chain. Thats going to require more testers and more probe cards. But in the end of the day, they had some tests out, they get pretty good at driving things back down to the standard test levels. I think the more interesting thing thats happening is were seeing a push toward more wafer test probably associated with advanced packaging where people are trying to get something closer to known good die before they stick the individual die into these advanced die stacking packages. So maybe less associated with transistor architecture and more associated with the move toward advanced packaging, we do see a bit of a tailwind there.

Tom Diffely -- D.A. Davidson -- Analyst

Okay. Great. Thats helpful. And then Shai, final question here. When you look at the labor market, how is that impacting you today? I guess, both in light of expanding your facility in Livermore and also restructuring a few other facilities?

Shai Shahar -- Chief Financial Officer

Yes. Its true that we see some delays in hiring and vacancy is a little longer. You can see that by looking at our OpEx for Q3, right, we expect it to be a little higher than it came in. But we do be something we keep an eye on, and we think we can manage. We see this labor shortages coming to better results as we get into Q4. We already have more people on board one month into the quarter. So thats encouraging, and we are on schedule to open our -- start production in our new manufacturing center this quarter.

Tom Diffely -- D.A. Davidson -- Analyst

Great and thank you for yor time today.

Michael D. Slessor -- Chief Executive Officer & Director

Thanks Tom

Shai Shahar -- Chief Financial Officer

Thank you, Tom

Operator

[Operator Instructions] Our next question comes from the line of Brian Chin of Stifel. Your line is open.

Brian Chin -- Stifel -- Analyst

Hi. Good afternoon. Nice results. And thanks for letting us ask a few questions. Also a nice gross margin print here in 3Q and comparable, I guess, guidance for 4Q. Understand that theres cost and labor headwinds that might persist into next year, but also assuming that revenue maintains or progresses from 4Q levels and maybe the mix kind of even enriched in terms of logic foundry. What would hamper you from continuing to operate in sort of the upper half of the 44% to 47% gross margin range, not on every quarter basis, but at least averaging out to that over a full year.

Shai Shahar -- Chief Financial Officer

So as we said in few earnings calls, the biggest factor -- the factor that impacts the most our gross margin is product mix. We are running along this trend line, as Mike mentioned in the call, toward our 47% gross margin at the target model. But as we make progress toward the goal, we can say things fluctuate along that line. We saw it Q3 was 46%. When you look at Q4 outlook, revenues, at least at the midpoint, are higher than Q3, but gross margin midpoint is lower than the actual gross margin for Q3 and because of that mix. So that phenomenon, I think, will stay with us as we continue to make progress toward the 47%.

Brian Chin -- Stifel -- Analyst

Okay. Thanks. And earlier this morning, Teradyne referenced, I think, a 25% increase in test intensity for heterogeneous chiplet style packaging relative to comparable monolithic IC. Mike, I think thats within range, maybe even toward the high side of what youve talked about previously. So I was wondering how big of a tailwind could this activity represent next year? Do you see broader activity across a handful of key leaders in this space. And does that add any basis points of growth on top of the revenue CAGRs youve talked about at last years Analyst Meeting?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. So maybe start with the second part of the question first. If you look back at some of the underlying assumptions that went into the target model that gets us to $850 million in about 2023, advanced packaging and die stacking, heterogeneous integration are a very prominent driver to get us to that model. So when we think about the growth rate that get us there in 2023, they largely are incorporated. But as you note, we are seeing some pretty prominent leaders in the industry shift their road maps toward these heterogeneous integration techniques. Our largest customer has been very clear that theyve got a major client processor coming out thats going to feature this architecture. And as that drives up test intensity at least initially, you are going to see some potential tailwinds. But I think at the top level, we had contemplated these factors in our revenue growth assumptions that get us to $850 million in 2023.

Brian Chin -- Stifel -- Analyst

Okay. Great. Great. Thats helpful. And maybe just -- I was wondering, could you take a stab maybe at if you double or even triple the transistor count on one of todays sort of leading SoCs, what kind of proportional or not increase in test times do you think were talking about?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. I mean test time doesnt scale, as you might imagine, linearly with transistor count. Theres all kinds of interesting test technologies that allow customers to make sure theres not a one-to-one corresponds into that. But going back maybe to Toms question, the bigger thing rather than transistor architecture or transistor count is people trying to drive more and more test content to the wafer level and the die level, so that when they put the die in these advanced packages, they have a pretty high probability of making sure theyre good. You can imagine a scenario in an eight die stack where if one of those eight die is bad and you dont have the rework or redundancy available, thats a pretty good yield. And so thats the fundamental economics that are driving up test intensity associated with heterogeneous integration and advanced packages.

Brian Chin -- Stifel -- Analyst

Okay. Great. Thanks man. Thanks Mike.

Operator

Thank you. Our next question comes from Craig Ellis of B. Riley Securities. Your line is open.

Craig Ellis -- B. Riley Securities -- Analyst

Great and congratulations on the nice execution and the nice outlook. Mike, I wanted to start just by getting some clarification on the Livermore facility. So one, I believe the press release and your comments indicated that it would be ramping in the fourth quarter. But is it ramping for revenues? And is the revenue associated with that ramp the growth that were seeing sequentially in the business or just a part of that growth, I guess it would be a part because you also said that Systems is going to be up quarter-on-quarter?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. Its a pretty modest contributor to the overall midpoint revenue outlook. But I think it is significant that we are bringing it online on schedule, relaxing whats been a pretty significant or removing whats been a pretty significant constraint for us. We think about this in three components: the footprint we have; the installed tool capacities that we have; and then finally, the labor in our factories. And for those of you who have been following us for a while, you know weve been footprint constrained. So bringing this facility online, powering it up, getting tools installed as were doing now, really relaxes that major long lead time constraints that weve been operating under. Theres other capacity expansions going on worldwide. One of them in our RF line where we continue to see increasing business associated with the 5G ramp. So theres other component, too. Id say, a modest -- a little bit of the uplift in the sequential growth Q3 to Q4 is associated with the new facility, but the potential is a much more exciting opportunity for us.

Craig Ellis -- B. Riley Securities -- Analyst

Got it. And on that RF point, you mentioned that RF was particularly robust. Is that RF front end for 5G smartphones and that -- is that the move from more high-end smartphones over the first year one and year two of shipments to next years move more into the midrange. And I know weve got a number of Android releases that are coming in the first quarter, and theres quite a bit of excitement about some new baseband product for those. Is that what youre seeing? Or are you seeing things related to 5G that might be Wi-Fi-related customer premise equipment, that type of thing, WiFi 6, et cetera?

Michael D. Slessor -- Chief Executive Officer & Director

No. I think its -- there is some WiFi six elements to it, but I really think the strength is being driven by 5G handsets, both the growth associated with 5G handsets, but probably more importantly, from a test perspective, the content growth in an RF front end in a 5G handset, really pretty significant. If you look at the components and functionality in a 5G handset, the RF front end of a 5G handset, youve got a whole bunch of new components compared to a 4G handset. And of course, youre operating in many cases at significantly higher frequencies up to millimeter wave frequencies, which drives up the test complexity. So to answer your question, I dont think a lot of its WiFi 6, some of it really is a handset dynamic thats driving RF growth.

Craig Ellis -- B. Riley Securities -- Analyst

Lastly for me and at the risk of admonishment versus the two question guideline. Could you just talk a little bit more about the systems business? I thought that $35 million a quarter was a very robust quarter for the business, but it looks like its growing above that. So as we look at the different pieces of that business, you mentioned FRT, but there are others. Can you talk a little bit more about whats happening there, Mike?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. So the Systems segment, you can really think in our current data is broken down into three pieces. One is the Legacy Systems business that we acquired as part of the Cascade Microtech acquisition. And that was a business that both under Cascades umbrella and ours kind of a low single-digit grower, serving R&D labs, characterization, failure analysis, things like that. But weve added two of our recent acquisitions to the Systems segment, one being FRT. And I mentioned the robust adoption were beginning to see, especially in the foundry ecosystem associated with the advanced packaging metrology applications that FRT serves. Thats been a really nice growth driver for that segment. And the other piece is our acquisition almost exactly a year ago of HPD to get us into the quantum computing test space. So this is test and infrastructure for enabling all of the providers of quantum computers. And theres a long list of companies beginning to commercialize useful quantum computers for some really interesting applications. Were helping them with the test and measurement applications associated with that as that industry begins to grow. So as we look at the Systems segment, which a couple of years ago was $25 million a quarter, adding on these two other components, FRT and HPD, which are both growing faster but also adding the revenue to it is the primary reason for us getting up to the mid-30s and hopefully, the high 30s in the near term.

Craig Ellis -- B. Riley Securities -- Analyst

Thanks man. Thanks Mike.

Michael D. Slessor -- Chief Executive Officer & Director

Thanks Craig.

Operator

Thank you. Our next question comes from David Duley of Steelhead. Your question please.

David Duley -- Steelhead -- Analyst

Yeah. Thanks for taking my question. You mentioned that you had a nice improvement sequentially in gross margins. I was just curious, Im sure there were still some supply constraint margin impact and higher freight costs. Could you perhaps help us understand how much is still dragging there with freight and supply issues?

Shai Shahar -- Chief Financial Officer

Actually, the supply -- go ahead, Mike.

Michael D. Slessor -- Chief Executive Officer & Director

No, go ahead, Shai.

Shai Shahar -- Chief Financial Officer

So actually, we didnt see a big impact from increase in shipment costs and things like that to our gross margin. Its just by the nature of our products, the way we ship them, the terms with the customers, this doesnt have a big impact, and it didnt have a big impact on our gross margin in Q3. And we dont think its going to be significant in Q4 as well.

David Duley -- Steelhead -- Analyst

And I know it probably wasnt very meaningful, but was there some revenue impact?

Shai Shahar -- Chief Financial Officer

No, not at all. Pretty small. Sometimes you can have a big probe card waiting to be shipped because its missing a small component, but it was really minor. so far, really deja vu by operation team.

David Duley -- Steelhead -- Analyst

Yes. And then as far as the FRT business, could you help us understand how big a segment of business or how big this market is? And what exactly are you measuring in the advanced packages? You gave some description, if you could just dig in a little bit deeper, that would be great.

Michael D. Slessor -- Chief Executive Officer & Director

Yes. Why dont we start with the application space. I mean theres a variety of new measurements that need to be made on these chiplets, primarily at the interfaces between the adjacent chiplets. So you can imagine if youre taking two of these chips and stacking them together, you want to make sure that the connections typically solder bumps or copper pillars are reasonably planer, flat, but theres no defects, things like that. And so the measurement -- a rapid increment of planarity of those services and things like bow and warp very important for maintaining assembly yields in these brand new chiplet applications. So a lot of our measurements were associated with that. The interfaces between chiplets before theyre assembled together. Now because this is an emerging application, its difficult to size the market. I think weve looked at it as overall probably from a TAM perspective, the total available market of a couple of hundred million. Thats a fairly wide swath across all possible advanced packaging apps. And theres a variety of different competitors and alternatives that are probably going to divide up the different subsegments and sub-applications as standard semiconductor applications have been. So I think $150 million, $200 million, probably a reasonable placeholder for a total available market. It will obviously, from these levels, take us a while to grow into that. But were really excited about the progress from the FRT team so far.

David Duley -- Steelhead -- Analyst

Thank you.

Operator

Thank you. Our next question comes from Krish Sankar of Cowen and Company. Please go ahead.

Steven -- Cowen and Company -- Analyst

Hi. Thanks for taking my questions. This is Steven calling on behalf of Krish. First question maybe for Shai. If I could dig in a little bit more on the gross margin during the quarter and as part of your guidance. For your probe card revenues were flat compared to prior quarter that you guys had pretty nice margin expansion there. Is that more a function of a better product mix within your foundry customer segment? Or did you also see some material margin expansion within the memory customer segment as well?

Shai Shahar -- Chief Financial Officer

You were not very clear on the -- just the quality of the line. Can you repeat that, at least part of it?

Steven -- Cowen and Company -- Analyst

Yes, I apologize for that. Can you hear me better now?

Shai Shahar -- Chief Financial Officer

Yes, thats better.

Steven -- Cowen and Company -- Analyst

Okay. Great. Yes. So the question was on your gross margin expansion within the probe card business in Q3 and for the implications about Q4 margin expansion as well. So your foundry and memory customer mix were relatively flat sequentially between Q3 and Q2. So just curious if most of the gross margin expansion within the probe card business in Q3, if that was primarily from foundry or did you see a meaningful amount of margin expansion from memory customers as well?

Shai Shahar -- Chief Financial Officer

So in Q3, it was -- both our segment had a better margin. If you look into Q4 -- so actually, the midpoint of the outlook range for gross margin in Q4 is below the 46%, right, its 45.5%. And the main contributor goes back to what we said in our prepared remarks, about product mix within the specific market. So its true that traditionally, Systems and then Foundry and Logic has higher margins than DRAM and then Flash. But first of all, there is overlap between them. You can have a high-end DRAM design that has a better margin than Foundry and Logic design. And you can certainly have -- within the DRAM market, two designs with completely different market -- different margins. So as we look into Q4, what we see is we expect less favorable product mix within the market that within Foundry and Logic, within DRAM, et cetera, and not necessarily between the markets.

Steven -- Cowen and Company -- Analyst

Got you. Thank you for that. And as for my follow-up, a question on your large Korean customer in the quarter. So I imagine most of the business there is probe cards on the memory side. But can you talk about any potential opportunity longer term within their foundry business as well?

Michael D. Slessor -- Chief Executive Officer & Director

Yes. They were, as you know, the 10% customer in Q3, and I believe they were 10% customer in the second quarter as well. In Q3, there was a pretty strong contribution from their foundry business as well. And thats probably the only customer worldwide where we have a significant DRAM business and a significant Foundry and Logic business, not to mention the Systems business as well. So theyve been a customer of us on the probe card side in Foundry and Logic for many years. There is, I think, as they grow their capability and capacity in competing for fabless customers, I do think theres an opportunity there. Probably not much of a share gain opportunity because we feel like we do have reasonably high native share with that customer and a strong relationship across both the DRAM and Foundry and Logic businesses. But as we talked about some of the other customers making big capacity investments this year, theyre certainly in that group. And so as they expand their foundry and logic business, we would expect to grow with that.

Steven -- Cowen and Company -- Analyst

Very helpful man. Thank you.

Michael D. Slessor -- Chief Executive Officer & Director

Thanks.

Operator

Thank you. Our next question comes from Charles Shi of Needham & Company. Please go ahead.

Charles Shi -- Needham & Company -- Analyst

Good afternoon, Mike and Shai. Thanks for taking my questions. First, I want to really congratulate the FormFactor team for strong execution on gross margin. It looks like not only your Q3 overall margins back half that the probe card side is retaking the 45%. Really congratulations on that. So I want to ask a little bit longer term questions. I want to talk about -- ask you about market share. Obviously, we know where you are strong. Youre very strong with the leading IDM on the microprocessor side. You have a very strong position in -- on the foundry side with a good exposure to the mobile SoC side. Maybe let me start with the microprocessor. Obviously, the leading IDM with the aggressive turnaround effort, its becoming very interesting for us to really watch the competitive dynamics between them and the other microprocessor provider. Obviously, thats a fabless customer, but may have some indirect exposure there. I want to really ask you in that space, with the market share puts and takes what is your high-level view on the potential tailwinds or either -- or headwinds in the context of that competition between those two microprocessor providers? And how would potentially changing market share could affect your microprocessor probe card business, either favorably or unfavorably? Then I have a follow-up.

Michael D. Slessor -- Chief Executive Officer & Director

Okay. Yes. As you note, we obviously have strong share at the leading microprocessor manufacturer, but the fabless microprocessor manufacturer has obviously posted some very impressive growth numbers over the last little while, which havent gone unnoticed by us. Our native share is lower there. Our market share is lower there for a variety of reasons. But because its lower and because they are gaining share, weve got a pretty strong initiative to go raise that share at the fabless microprocessor customer. So right now, being candid with you, if the share were to shift one-to-one that would be a net headwind for us. That would be a net loss for us. But its been an area where weve been focusing on, and weve got good traction. And I think consistent with our long-term strategy of being a leading supplier at all the leading customers around the world I think were in a reasonable position to rectify that. Some interesting subtleties with that business where they wont necessarily use the foundrys test services but actually manage themselves. So in that case, theyre actually a fabless direct customer, which not to complicate things too much is one of the interesting subtleties of this business.

Charles Shi -- Needham & Company -- Analyst

Thanks for that. Great color, Mike. Maybe I want to turn to the mobile SoC processor side. Theres been a quite topic of that one of the Chinese smartphone maker reportedly is working to bring the apps processor design back in-house, maybe starting from three nanometer. I think this is -- the move kind of reflects the continued evolution of like all those system companies coming in, take designs in-house. And maybe there is a headwind for one of your indirect foundry customer in the mobile space, a U.S. company there. I wonder what FormFactor thinks in terms of the potential landscape shift also in the mobile SoC space, in particular. I mean, when these system companies, they tend to favor one leading foundry over the other where you may have a little bit stronger position there. And could you give us a little bit more color on that? Thank you.

Michael D. Slessor -- Chief Executive Officer & Director

Yes. I mean I think that this trend of in-sourcing and more vertical integration with our customers is an interesting one. And its not new, right? The hyperscalers have been taking design in-house. Obviously, the large handset manufacturer continues to take more inside and almost becoming their own silicon company, their own fabless company. This, again, goes back to similar comments I made about the microprocessor situation where is one of the reasons why we want to make sure we have strong share positions and strong relationships at all of the leading foundries and with all the leading fabless customers because many of these fabless customers actually manage their design and test operations themselves and dont outsource them to the foundry. So it creates a more complicated account management structure. But again, I point back to really making sure that we, as a company, are engaged, and I think were pretty well engaged with all of the leading fabless and foundry customers so that these shifts in their manufacturing strategies and sourcing strategies end up being net neutral for us.

Charles Shi -- Needham & Company -- Analyst

Thank you. Thats all my questions. Thank you.

Michael D. Slessor -- Chief Executive Officer & Director

Thanks Yu.

Operator

Thank you. Our next question comes from Christian Schwab of Craig-Hallum Capital. Please go ahead.

Tyler Burmeister -- Craig-Hallum Capital -- Analyst

Hi. This is Tyler on for Christian. Thanks for letting us have questions and congrats on the solid quarter. I want to ask about your DRAM probe card business, including your kind of implied Q4 guidance to flat. 2021 is going to be a pretty strong growth year. So Im just wondering if is there really any reason we should be suspect about the strength continuing to 2022, youre serving all customers and theres going to be continued design and no transitions next year. So Im just wondering if theres any reason that the strength shouldnt continue?

Michael D. Slessor -- Chief Executive Officer & Director

Yes, a good question, as you might imagine, a topic of pretty significant internal debate. I think one of the things to remember is history has taught us that DRAM probe cards, like all DRAM supply chain elements are a cyclical business. For the past couple of quarters, and we expect here in the current fourth quarter, kind of to be at the historical high end, high $30 million, low $40 million quarterly DRAM probe card revenue, which is above sort of the mid-30s that weve talked about being the average normalized level. The fundamental drivers for that, as you note, are continued node transitions and design releases. And as long as those continue in the customer base, I dont see any reason why at least the mid-30s assumption is not a reasonable one. We are a little bit surprised that weve got now two quarters in a row in the books and one quarter looking at the current one, sort of hovering around that $40 million level, which represents the all-time record quarter, I think, at $42.5 million or $43 million. So were operating pretty close to all-time record levels in DRAM. Given the historic cyclicality that might be a little surprising. But the fundamental constituents to drive that demand are still there. And I think were executing pretty well in DRAM. I think we probably gained share here in 2021.

Tyler Burmeister -- Craig-Hallum Capital -- Analyst

Thats great. Appreciate that color. And then second question, kind of on the supply chain, it sounds like you guys are executing well and not seeing any material impact to yourself, but I think you made the comment that you do expect the environment to persist in the next year. And presumably thats coming from conversations youre having with customers. So Im just wondering if there might actually be a benefit to this environment for the conversation with your customers at least benefiting you from a visibility standpoint? Any comments there on the supply chain impacts would be great.

Michael D. Slessor -- Chief Executive Officer & Director

Yes. I mean the supply chain issues have been really kind of interesting. And ironically, many of them have their root cause back in the semiconductor shortage. So where weve had challenges with subsystems or subcomponents that are not vertically integrated. They really have been associated with some isolated chip shortage. I dont think its improving visibility all that much. I mean, were still running lead times well within a quarter. But wed hope that as the capacity comes online associated with all of the different increases in capacity across the industry, especially at the leading-edge node to satisfy the shortage that, again, should be driving pretty solid demand across our different businesses. Part of what we benefited from, as I mentioned in the prepared remarks, is pretty vertically integrated for a tech manufacturing company in the semiconductor ecosystem. And that was not a very fashionable move to make several years ago. But we did it for a couple of good reasons, one of them being continuity, and it has paid off here a little bit.

Tyler Burmeister -- Craig-Hallum Capital -- Analyst

Thats great. Appreciate that. Thats all for me. Thanks guys.

Operator

Thank you. At this time, Id like to turn the call back over to Mike Slessor for closing remarks.

Michael D. Slessor -- Chief Executive Officer & Director

Great. Thanks, everyone, for joining us again. Were hopeful to attend a couple of conferences at end of the year. I dont know whether that will be in person or virtual, but hope to see you there, and thanks for your continued interest in FormFactor. Bye-bye.

Operator

[Operator Closing Remarks]

Duration: 50 minutes

Call participants:

Jason Cohen -- Senior Vice President, General Counsel & Secretary

Michael D. Slessor -- Chief Executive Officer & Director

Shai Shahar -- Chief Financial Officer

Tom Diffely -- D.A. Davidson -- Analyst

Brian Chin -- Stifel -- Analyst

Craig Ellis -- B. Riley Securities -- Analyst

David Duley -- Steelhead -- Analyst

Steven -- Cowen and Company -- Analyst

Charles Shi -- Needham & Company -- Analyst

Tyler Burmeister -- Craig-Hallum Capital -- Analyst

More FORM analysis

All earnings call transcripts