Image source: The Motley Fool.
Vicor Corp (VICR 4.53%)
Q4Â 2018 Earnings Conference Call
Feb. 26, 2019, 5:00 p.m. ET
Contents:
- Prepared Remarks
- Questions and Answers
- Call Participants
See all our earnings call transcripts.
Prepared Remarks:
Operator
Good day everyone and welcome to the Vicor Earnings results for the fourth quarter and the year ended December 31, 2018 which is hosted by James Simms and Dr. Patrizio Vinciarelli. My name is Shirley and I am your event manager. During the presentation your lines will remain on listen-only. (Operator Instructions) I would like to advise you all the conference is being recorded for training purposes and replay purposes.
Now I would like to hand the call over to James Simms. Please go ahead.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Thank you, Shirley. Good afternoon everyone and welcome to Vicor Corporation's earnings call for the fourth quarter and year ended December 31, 2018. I'm Jamie Simms, CFO and here with me in Andover are Patrizio Vinciarelli, Chief Executive Officer and Dick Nagel, our Chief Accounting Officer.
After the markets closed today, we issued a press release summarizing our financial results for the three and 12-month periods ended December 31st. This press release has been posted on the Investor Relations page of our website www.vicorpower.com. We also filed a Form 8-K today related to the issuance of the press release.
As always, I remind listeners this conference call is being recorded and is the copyrighted property of Vicor Corporation. I also remind you. various remarks we make during this call may constitute forward-looking statements for purposes of the Safe Harbor provisions under the Private Securities Litigation Reform Act of 1995. Except for historical information contained in this call, the matters discussed on this call, including any statements regarding current and planned products, current and potential customers, potential market opportunities, expected events and announcements, construction plans as well as forecast sales growth, spending and profitability are forward-looking statements involving risks and uncertainties.
In light of these risks and uncertainties, we can offer no assurance that any forward-looking statement will in fact prove to be correct. Actual results may differ materially from those explicitly set forth in or implied by any of our remarks today. The risks and uncertainties we face are discussed in Item 1A of our 2017 Form 10-K, which was filed with the SEC on March 9, 2018. We will file as required our 2018 Form 10-K by this Friday, March 1, 2019. Please note the information provided during this conference call is accurate only as of today, Tuesday, February 26th, 2018 -- excuse me 19. Vicor undertakes no obligation to update any statements including forward-looking statements made during this call, and you should not rely upon such statements after the conclusion of the call. A replay of the call will be available beginning at midnight tonight, through March 13. The replay dial-in number is 888-286-8010 followed by the passcode 10247812. In addition, a replay -- webcast replay of today's call will be available shortly on the Investor Relations page of our website.
I will start this afternoon's discussion with a review of our financial performance for the fourth quarter and the full year, Dick will comment on tax matters and Patrizio will follow with his remarks, after which we will take your questions.
Beginning with consolidated results, as stated in today's press release Vicor recorded total revenue for the fourth quarter of $73.7 million representing a sequential quarterly decline of 5.5% from the $78 million recorded for the third quarter and an increase of 25.4% of revenue recorded for the fourth quarter of 2017.
On a full-year basis, total revenue for the year was $291.2 million, 27.8% higher than the total revenue for 2017. As other companies have reported, December quarter results fell below expectations due to several factors, most notably weaker demand in China and softness in data center spending. For Vicor Q4 bookings showed evidence of weakening demand. Fourth quarter revenues were influenced by upwards of a $5 million -- excuse me $5 million value of shipments rescheduled into 2019. In a moment Patrizio will address booking trends and specific circumstances influencing our outlook.
Last quarter we began providing a breakdown of revenue by advanced and legacy product categories. The advanced products category represents the some of the products of our Picor and VI Chip operating segments reflecting proprietary patent advances in power -- factorized power distribution, power conversion topologies, control systems, power semiconductors and advanced power packaging. Legacy products are those associated with our well-established Brick Business Unit operating segment serving a broad range of classic distributed power applications with integrated converter modules, configurable standard product assemblies and custom solutions. Going forward, we'll be referring to these products simply as Brick products in our remarks and in our filings. We will continue to report our operating segments in our 10-K and 10-Qs as we have for some time and as the BBU, VI Chip and Picor operating segments reflecting inter-segment transactions, our financial reporting structure and management oversight. But we believe the advanced product and Brick product designations net of intercompany, inter-segment transactions are appropriate for summarizing our progress in implementing our strategic transition from a relatively high mix, low-volume model serving a highly fragmented and diverse customer base, largely in mature market segments to a relatively low-mix, high-volume model serving OEMs and their manufacturing partners focusing on high-growth opportunities with a portfolio of highly differentiated products.
For the fourth quarter, advanced product revenue was flat sequentially, rising less than 1% over the third quarter despite the program delivery rescheduling previously referenced. Advanced product revenue for the fourth quarter of 2018 rose 21.1% from the fourth quarter of 2017. As a percentage of total quarterly revenue, advanced products contributed 36.7%, up from 34.6% of total revenue for the third quarter. For full year 2018, advanced products revenue totaled $104.6 million, a 36.8% increase over the total for 2017 and represented 35.9% of 2018 total revenue versus 33.6% for 2017. Fourth quarter revenue for Brick products declined 5.5% sequentially, but rose 28.1% over the fourth quarter of 2017.
As a percentage of total quarterly revenue, Brick product sales represented 63.3% in contrast to 65.4% for the preceding quarter. For full year 2018, Brick product revenue totaled $186.6 million, a 23.3% increase over the total for 2017 and represented 64.1% of 2018 total revenue versus 66.4% for 2017. Quarterly international revenue declined 8.1% sequentially and represented 60.5% of total revenue.
Advanced products exports rose 6.5% sequentially and represented 46% of exports for the fourth quarter, indications of the stability of our shipments for 48 volt to point-of-load programs with Asian ODMs and CMs. Brick products declined 17.8% sequentially and represented 53.9% of exports for the fourth quarter, down sequentially from 60.3% reflecting bookings declines from our Chinese and European distributors, which largely serve industrial customers.
Geographically, total revenue for 2018 breaks down as follows. North America represented approximately 38%, China, including Hong Kong, represented approximately 37%, Asia Pacific, excluding China, represented approximately 13%, Europe and the Middle East represented 9.5% and all other geographies sum to 2% of total revenue.
For revenue across 2018, we recorded increases across all geographies, reflecting higher unit volumes and improved pricing. Exports to China of both advanced products and Brick products accelerated early in 2018 and finished the year-over-year growth of approximately 34%. North American revenue increased approximately 32% driven by strength in aerospace and defense electronics, balance between advanced products and Brick products.
Exports to Asia-Pacific, including China, grew approximately 16% and exports to Europe increased by 15%. For the fourth quarter and the full year, we had one 10% customer, New Power Electronic (ph), our largest authorized distributor in China. For the fourth quarter and the full year, our five largest customers, including New Power and two other distributors, represented 31.3% and 36% respectively of total revenue.
Recall that we report export volumes on the basis of ship to address. So as such the 10% customer concept may not provide a complete view of customer concentration. Distributors obviously have many downstream customers with diversified applications. In contrast in OEM using a relatively small number of our SKUs usually spreads a programs volumes across multiple contract manufacturers and combined shipments for a given program for a given period may exceed 10% of revenue.
Turns volume, that is orders recorded and shipped within the quarter was approximately 20% of fourth quarter revenue, up from approximately 18% of third quarter revenue. Lower turns volumes throughout 2018 have been a reflection of extended lead times for certain raw materials which have resulted in extended schedule delivery times for customer orders. However, given improved availability of some raw materials, we have been able to accommodate some customer requests for accelerated delivery, which is the sign of improved supply chain visibility.
As mentioned, Patrizio will address bookings in his remarks, but I want to emphasize the following, which I've spoken to before. Bookings and shipment patterns can differ, sometimes meaningfully for advanced products and Brick products. Advanced products bookings and shipments thus far have reflected the low mix, high volume requirements of a concentrated customer base with individual high volume orders scheduled for delivery over multiple quarters. Design wins for advanced products can require upwards of a year of engagement with an OEM and production volume orders from one or more contract manufacturers may not be placed for a similar period.
To illustrate a hypothetical OEM program may be planned for a three-year life before a major redesign. Such a program typically involves multiple contract manufacturers, which place orders with us, based on the OEMs production schedules. In any year of the program, we might receive relatively few orders, but the orders for high volumes to be shipped over several quarters. Such shipments may be subject to rescheduling by the OEM based on revisions of its demand forecast or by the contract manufacturer, based on their factory loading and supply chain visibility. As we seek to expand the number of OEMs and their programs with which we are involved, we expect to smooth out this lumpiness of the cycle for advanced products. But until then listeners should consider the relatively large impact of a program change, notably shipment rescheduling on our results as we experienced in the fourth quarter.
In contrast Brick products generally are high mix, low volume serving a statistical customer base of nearly 10,000 customers, competition for design wins is less intense and generally of short length for Brick products given our mass customization manufacturing model, which enables us to meet customer requirements that catalog based companies cannot. Many Brick products have been designed in the customer end products for a long time and such customers typically are in relatively stable and mature markets with well recognized demand patterns. While a few large customers place program or blanket orders, Brick products generally are -- product orders are generally smaller averaging less than 100 units and scheduled over weeks and months contributing to a smooth booking pattern across business cycles. There are anomalies to booking patterns as we believe we are currently experiencing. For example, in China, where the imposition in September of an additional 10% import tariff on US manufactured goods made trading conditions challenging, the threat of another round of higher tariffs to be imposed if the current trade negotiations breakdown cause customers to postpone orders in the fourth quarter and to date in the fourth -- excuse me, first quarter of 2019. A definitive positive resolution of the uncertainty about additional tariffs may result in a resumption of vigorous order flow.
I'll now turn to product profitability. Consolidated fourth quarter gross profit margin as a percentage of revenue was 45.9%, largely reflecting lower product volumes and inefficiencies caused by shifting product mix. Advanced product volumes were flat with increased VI Chip shipments offset by lower Picor shipments. Changing mix was a contributing factor for both product categories. While our third quarter consolidated gross profit margin rose to 50% stable mix was a strong contributor, as well as relatively high volume.
For the fourth quarter, manufacturing performed well under difficult conditions of changing demand and we remain confident of the scalability of our business model. Also during the quarter, we were successful in meeting our needs for raw material inventories as vendor lead times shortened. Section 301 tariffs on our Chinese imports did not have a material impact on our procurement costs during the quarter.
However, the cost going forward may not be inconsequential given the volume of components we sourced from China. When possible, we are seeking alternate non-Chinese vendors. As indicated last quarter, we filed request with the US government for exclusions from tariffs on a limited number of components for which no alternate vendor exists.
However, we have not received any response yet. We continue to monitor the impact of tariffs on the costs of imports from China. If this impact becomes meaningful, we may add a tariff surcharge to the selling price of our products.
Turning to operating expenses, fourth quarter operating expenses rose 3.2% sequentially. For 2018 total OpEx rose 3.4% over 2017, in line with our expectations with customary increases in compensation and outlier increases in audit and legal expenses offset by a decline in R&D prototyping costs.
On a relative basis Q4 operating expenses reversed a seven-quarter trend, actually rising as a percentage of quarterly revenue to 36.3% from 33.3% the prior quarter, but this is due in part to the unanticipated decline in revenue. R&D expenses rose 3.5% sequentially and from 13.7% to 15% of quarterly revenue with the only noteworthy spending variance being another decline in prototyping costs. Marketing and sales expenses rose 3.1% sequentially and from 13.6% to 14.9% of quarterly revenue, with no noteworthy spending variance. G&A expenses rose 2.6% (ph) sequentially and from 6% to 6.5% of revenue, also with noteworthy spending variance. Operating income declined sequentially to 9.5% of revenue from 16.7% for the prior quarter. For the year 2018 operating income was 11.1% of revenue, up from a negligible operating loss for 2017.
On an absolute basis, these results are in line with our recent statements regarding spending trends. We continue to expect operating expenses to decline as a percentage of revenue, while expanding at low single digit percentage rates in absolute terms, largely driven by compensation costs. As stated before, our long-term model is to reduce total operating expenses to 30% of revenue.
I'll now turn to Dick for a quick overview of our tax position. Dick?
Richard J. Nagel -- Corporate Vice President, Chief Accounting Officer
For the fourth quarter our effective tax rate was 5% and we recorded a net provision of $363,000. For the full year our effective tax rate was 3.3%, reflecting a cumulative provision of just under $1.1 million. The majority of which consisted of state and foreign tax expense. During prior conference calls, we have explained our perspective on the valuation allowance we maintain against the value of our domestic deferred tax assets under the assumption sequential quarters of improved profitability would allow us to conclude the release of the allowance would be appropriate. While our outlook remains positive for sustained profitability, the results of the third and fourth quarter combined with generally poor near-term visibility led us to conclude a release of the valuation allowance, which stood at approximately $30 million as of December 31, 2018 will be premature. As such, pursuant to the requirements of ASC 740, we have left the full valuation allowance in place. We will continue to assess the potential release of the allowance later in 2019. The composition of our deferred tax assets shifted further at year-end as the Company has been utilizing available net operating loss carry-forwards and tax credits to offset taxes due on taxable income throughout the year and consumed major portion of its federal NOL balance in 2018 leaving federal and state R&D tax credits, along with other tax credits reserves and other accounts as the balance of our DTAs.
As I previously mentioned, we believe it is more likely than not we will release some portion, if not all, of the valuation allowance later in 2019. Jamie?
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Thank you, Dick. Returning to the P&L, we recorded fourth quarter net income after minority interest of $6.9 million, down from the $13 million recorded for the prior quarter and up from the $1.6 million recorded for the fourth quarter of the prior year. For 2018 net income, again after minority interest totaled $31.7 million, up from an essentially breakeven level for 2017. Diluted EPS for the fourth quarter totaled $0.17, down from the third quarter's $0.32 and up from the $0.04 per share recorded for the fourth quarter of the prior year.
Full year diluted EPS was $0.78 in contrast to last year's breakeven figure. Our diluted share counts for EPS calculations were 40,729,000 for the full year EPS and 40,981,000 for the fourth quarter EPS.
Turning to the balance sheet, cash and cash equivalents sequentially, increased $2.4 million for the fourth quarter ending at $70.6 million. On a year-over-year basis cash and cash equivalents increased by $26.3 million net of significant investments in equipment to expand manufacturing capacity made late in the year. The fourth quarter cash increase reflects operating cash flow of $13.3 million for the quarter, a decline from the $14.3 million recorded for the third quarter. A positive working capital swings offset the net income decline for the fourth quarter. Capital expenditures rose to $11.3 million from the prior quarter's $3.3 million reflecting the substantial amount of new production equipment installed as well as certain facilities upgrades.
Capital expenditures for 2018 totaled $18.2 million, up from the prior year's $12.5 million. I'll return to capital spending and capacity in a moment.
Trade receivables, net of reserves totaled $42.8 million down sequentially 2.6%. And DSOs rose to 44 days from 41 days. At year-end the trade receivables portfolio was and remains today sound. Inventories net of reserved increased 9% sequentially to $47.4 million, largely reflecting rising material and component purchases to ship our advanced products backlog.
Annualized inventory turns were stable at 3.6 times. So concluding my review of the fourth quarter, total employee headcount as of December 31st declined to 1,007 from 1,018 for the prior quarter but rose from the December 31, 2017 total headcount of 980. Full-time headcount was 976 at year-end, up 2 from the prior quarter and up 6 year-over-year. I'll now provide an update on our capacity expansion and planned capital expenditures. We have approximately $7 million of production equipment scheduled to be placed in service in the first half of 2019, which is expected to complete the first phase of capacity expansion that began last year.
Completion of this investment will add approximately 35% to our chip manufacturing capabilities. We are into the permitting phase of an 85,000 square-foot addition to our Andover manufacturing facility. We plan to break ground on this addition to our existing plant in 2019 and take occupancy in 2020. The planned addition of multiple manufacturing lines in this additional space sequenced across 2020 and 2021 is planned to increase our advanced products capacity by an additional 100%. We are budgeting roughly $17 million for the construction, which will be paid through 2019 and concluded with occupancy.
We are also budgeting an additional $12 million for two phases of production equipment installation, the first beginning at occupancy. The second phase of capital equipment spending will be scheduled six months ahead of initial demand for that capacity. Based on these budgets and our outlook for cash generation, we anticipate internally funding both the building and the twp phases of investment in automated manufacturing equipment. This sequenced approach to capacity expansion is designed to allow us to meet anticipated production scenarios by increasing our total Andover overcapacity to the $750 million revenue level by the end of 2020 while deferring, to the extent possible, incremental capital commitments and equipment depreciation charges. We are also exploring with potential licensees establishing an alternate source for advanced products through a separate manufacturing facility outside of the United States. The licensee's facility would complement Vicor's initiative to address global demand for 48 volt power system solutions in both automotive and artificial intelligence applications.
Turning to our outlook. Q1 revenue will be lower than Q4, while bookings are expected to increase sequentially with a Q1 book to bill ratio slightly above 1. Bookings are forecast to increase in an accelerating pace as the year progresses, with revenues lagging one to two quarters. We expect to remain profitable and generate operating cash flow. Having offered this limited guidance, I will remind listeners as I do each time I speak with you, our operating and financial forecasts are subject to unanticipated changes, many of which are caused by factors and influences outside of our control.
With that I will turn the floor over to Patrizio.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Thank you. Fourth quarter bookings for all products declined 34% sequentially. Bookings for Brick products declined approximately 15% sequentially with particular softness in Chinese industrial markets. Geopolitical uncertainty contributed to reduce expectations from Europe. Until trade matters are resolved our outlook for both Chinese and European industrial markets is cautious. However, confidence in US markets remains relatively firm for both Brick products and advanced products.
Overall bookings for advanced products declined sequentially as orders for our power on package solution for high current AI applications did not follow through from the progression of prior quarters. Near term volumes expectations for our first GPU Power-on-Package or PoP solution where we said they well-publicized forecast revisions from the least customer for that solution.
Bookings for other 48 volt direct to point-of-load programs were also slower than anticipated in Q4 reflecting temporary softness in (inaudible) with new programs scheduled to ramp in the second half of 2019. We remain confident of the opportunity before us in the rapidly developing artificial intelligence, supercomputer and datacenter segments. A feverish pace of new program activity is setting the stage for substantial growth in bookings, revenues and profitability. For power package, we have secured major design wins in DI space and in supercomputing with production ramps expected in 2020.
Our engagement with market participants continues to expand as companies developing advanced GPUs. TPUs, an application specific integrated circuits specifically artificial intelligence ASICs face fundamental power delivery challenges. With power delivery standing in the way of performance, Vicor's power package has quickly established itself as the power systems solution needed to overcome power conversion and power delivery Challenges.
Our technological leadership is expanding as competition remains anchored by legacy 12 volt infrastructure. Our variants in the team of a so-called intermediate bus architecture known to be fundamentally handicapped after repeated failed attempts at competing with 48 volt factorized power. Recognition of unrivaled technical leadership and enabling product capabilities are motivating broader adoption of Vicor's power-on-package solutions by leading developers of GPUs , TPUs and every other high current ASIC. Anticipating rising current requirements from hundreds of Amperes to 1,000s of Amperes to fuel smarter AI processors Vicor has developed Power-on-Package solutions using proprietary vertical power delivery or VPG technology. AI design wins for our performance VPD solutions, evidence Vicor's ability through fundamental innovation to keep expanding the confidence for the leadership causing competitors to play catch-up within products that cap more than twice as much space in applications with these no excess space to be had.
In space constrained applications, Power-on-Package design wins set the stage for complementary front-end design wins with delivery code that firms providing nearly 10 fold increase in power density relative to conventional AC to 48 DC front-ends, including front-ends using GaN FETs. Even though GaN FETs are capable of switching of high frequency, in high voltage power conversion applications, the switching frequency of GaN FETs is limited by losses in power conversion circuitry to less than one-tenth (ph) to the operating frequency of the other firm. As such because of a speed limit imposed on high voltage GAn FETs by power conversion circuitry from (inaudible) using GAn FETs take up nearly 10 times more space than the other firm which is not constrained by similar speed limits. Gan FETs also fail to add value either in terms of performance or cost to low voltage applications, specifically with the emerging 48 volt fans of the mortgage applications. In automotive, Vicor is gaining significant traction with OEMs and Tier 1 suppliers, challenged by the certification, the event of the 48-volt bus and autonomous driving. Our valuable position includes high power density and modular flexibility. As recently reported, deployment of the most advanced level 5 autonomous driving system will ramp substantially starting in 2020. Based on this and the trajectory of other early engagements, we expect that our growth in the automotive segment will before too long be comparable to the growth we're now experiencing powering artificial intelligence and service in data centers. Across key growth markets, we are addressing major opportunities and scaling up capacity to support for cash production requirements.
Let's now turn to questions. Operator?
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Shirley?
Questions and Answers:
Operator
Thank you. (Operator Instructions)
Thank you. And your first question comes from the line of Quinn Bolton (ph). Please go ahead.
Quinn Bolton -- -- Analyst
Hi Patrizio or hi Jamie. Jamie, just wanted to start, I guess, first on a couple of business questions. It sounds like you mentioned there were some rescheduling of $5 million of orders from 2018 to sometime in 2019 from I think your largest Power-on-Package customer. Have those reschedulings or have you seen any additional reschedulings quarter-to-date here in March or has that forecast now stabilized?
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
I'll let Patrizio take it.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So time will tell whether (inaudible) stabilized. I think our exposure from a revenue and backlog perspective is limited and fundamentally tied to the $5 million that is shipping later this quarter.
Quinn Bolton -- -- Analyst
Okay, so that will actually ship here in Q1?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Q1, and very beginning of Q2. Yeah.
Quinn Bolton -- -- Analyst
Okay great. And I know you've referenced a couple of times in your prepared comments the visibility is low. But you did say you thought bookings and revenue would grow into the second half. I'm trying to understand are you sort of anticipating that the March quarter would be the bottom or do you really just not yet have enough visibility to call the bottom of this cycle?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So we expect to see nearly 15% growth in bookings in Q1 and progression with high bookings levels in Q2, Q3 and in the year in Q4, near the $100 million level.
Quinn Bolton -- -- Analyst
Okay. And revenues you said typically follows that booking trend by one to two quarters.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
It will follow the bookings by nearly two quarters -- more than one quarter closer to two quarters.
Quinn Bolton -- -- Analyst
Okay.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Quinn. I also want to take exception with the use of the words cycle because what happened with the rescheduling was very specific to a circumstance. And in general, it's very difficult for anyone to separate the events that are largely categorized as macro economic when in fact it's our point of view, notably in China that the slowdown is most fundamentally associated with customers waiting for more certainty about tariffs. So does that help?
Quinn Bolton -- -- Analyst
It does. And then just lastly, sort of business question. You've mentioned now on a couple of conference calls that you source a fair number of components in China and that you're trying to find sources outside of China. Just wondering if you could give us an update on that initiative.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Well, we are realigning our supply chain in view of a number of considerations. Obviously the dependency from Chinese suppliers being one of them, it's not the only one. So we believe that we are well positioned going forward to ensure that we have continuous supply and importantly continued supply at cost competitive levels that support our expanding business model.
Quinn Bolton -- -- Analyst
Great. And then the last one for me, for you, Patrizio. Just you mentioned the vertical power delivery or the geared MCMs give you the capability now to deliver more than 1,000 amps of current. Can you just sort of give us a quick overview what is it about the geared MCMs or vertical power that allow you to get into the 1,500 amp or higher range with that technology? Thank you.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So this technology essentially caps by nearly a factor of 10, the interconnector assistance between the current multipliers and the XPU being powered by the current multipliers. So for instance, the well advertised GPU application, the current multipliers are located on the sides of the GPU. There are tens of watts of power loss that take place in the current traveling sideways from the sides of the XPU to the bottom of the XPU. In vertical power delivery the current multiplayer or current multipliers, so we have an application for instance with four-current multipliers, the four current multipliers reside under the XPU and that allows the current to travel a much shorter distance to feed the XPU in a much more efficient and uniform way.
Now, this may sound relatively obvious, but in reality it's quite complex because there are obstacles standing in the way of providing vertical power delivery. I'm not going to go into those technicalities, but sufficient to say that it's not easy to do, it's been viewed as a complex task. We've overcome the fundamental challenges with proprietary developers that enables this capability. Now to be clear (inaudible) power delivery is not coming to a screeching halt. In fact, we have new applications with more advanced GPUs that will take it up to as much as 1,500 to 2,000 amps, still with a lot of power delivery. But we've also recently won visually without any effective competition.
The first vertical power delivery opportunities were again the value proposition is one of much more efficient power delivery, one where in effect the level of AI capabilities not gated by gating the current to the XPU.
Quinn Bolton -- -- Analyst
Thank you.
Operator
Thank you. Your next question comes from the line of Matthew Vigneau (ph). Please go ahead.
Matthew Vigneau -- -- Analyst
Hello. This is a similar question to Quinn's. In the past, management has mentioned that robust economy wasn't needed to deliver growth. So my question is what really leads the confidence that this is mostly tariff related and temporary versus the potential for a push-out of the data center upgrade cycles and a push-out that could potentially last for a longer period of time? Thank you.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So to be clear the issue, or the headwinds as we refer to the circumstances of the fourth quarter had to do with more than the situation with the tariffs on imports into China. They had to do as mentioned in our prepared remarks with one of our major applications for GPUs suffering setbacks that nothing to do with China and more generally with some level of softness in (inaudible) infrastructure spending. We believe based on a variety of inputs we've received that that softness is very temporary. These new programs that are starting to ramp in the middle of the year. And going back to your fundamental question of how do we ensure that we can deliver growth in good times, but also not so good times, obviously not necessarily at the same level. The answer to that question is very simple. By having kick-ass products there is a competition that and that's what we're doing in point of load applications, that's what we're doing in super computing applications. Before too long that's what we were mean to be doing in front-end applications. The reality is that essentially every -- take as an example of the artificial intelligence chip market, right. So that's a market which time we value at around $1 billion. Everybody of significance in that market has come to Vicor for their solution. We are the only game in town.
So that's how we ensure long-term growth and that's one market. There are other opportunities in other markets that we're also pursuing because we believe in a differentiated business model, one that is not predicated on one particular end market. So, we're building presence in automotive, we are building presence in other kinds of free cashes before too long as mentioned earlier, we're going to have a very strong presence with front ends that are going to complement our superior point of load capability.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Do you have a follow-up, Matthew?
Matthew Vigneau -- -- Analyst
No. Thank you so much.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Thank you.
Operator
Thank you. Your next call, your next question comes from the line of John Dillon (ph). Please go ahead, John.
John Dillon -- -- Analyst
Hi, Patrizio, you mentioned $100 million bookings level. I wasn't quite sure. Are you talking about the second or third or fourth quarter for that level?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Fourth quarter.
John Dillon -- -- Analyst
Okay. So it will ramp from where we are, so you expect 15% increase in bookings up in the first quarter and then it will ramp up to the $100 million level. Is that correct?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Yeah, that's the expectation at this point.
John Dillon -- -- Analyst
Okay. And the 15% increase in bookings, I guess you're pretty far into the quarter. So I would imagine you have a pretty good feel for that. Is that a pretty good...
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Well, the quarter is not over. As we see in the fourth quarter surprises can happen and do happen but that's out forecast and (inaudible) this morning that that forecast is still good as of today.
John Dillon -- -- Analyst
Good. Okay. On your vertical power delivery products, this kind of brings me back to the IBM days. I believe on the start of the VI Chips you provided the (inaudible) processor of the IBM computer. And if I remember correctly you actually enabled IBM to have a higher performance computer back then. Is that correct?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Yeah, but it's really not vertical power delivery, it's enabled with the technology that -- for which we recently got initial design wins. The problem we're solving with vertical power delivery is quite a bit more complex that in the early going or factorized power. It involves a changing our gears so to speak which is necessary in order to adapt from the cell pitch of our converter cells, which is around 3 millimeters or 3.5 millimeters to the pitch within an XPU or the power feed within XPU, which in one instance it's 1 millimeter pitch, in an other instance it's down to 0.45 millimeter pitch. That change of pitch presents certain challenges. Also not to get too technical, but just to give you a flavor of another challenge. The area under the XPU has historically been consumed by hundreds of bypass capacitors that are required in order to ensure that as the XPU undergoes rapid changes in current raw which now are getting to (inaudible) change in -- on time scales of nanoseconds that that XPU voltage node is kept within very tight control range. So the bank of capacitors has historically populated the area under the XPU and precluded power converters, current multipliers in particular form occupying the same area. We've also solved that problem. So fundamentally with the geared GCM or GCM we're enabling a complete solution that delivers currents in potentially the 1000s of amperes with very high bandwidth in effect occupying the same space historically has been taken up by bypass capacitors.
John Dillon -- -- Analyst
You are -- obviously like you mentioned before you're saving a lot of power by doing this by factor of 10 I think, the resistance by a factor of 10.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Yeah, so interconnected assistance in a lot of power delivery application would typically be, let's say 70 micro ohms, that may sound like a very small number. But when you are passing through that 1,000 amps that's 70 watts worth of heat which is a light bulb it in and of itself. With vertical power delivery that 70 micro ohms gets turned into 8 micro ohms. So you are essentially cutting that power loss by in order of magnitude. And therein lie 60-70 watts of peak power dissipation savings that can be in effect utilized to not just provide more power to the XPU, but also to provide more control power to the XPU, because, as voltage on 7 nanometer technology get to lower, lower levels we have applications now down to 0.4 watts.
So the processor is run nearly subtraction of the 0.4 watts. That's a very low voltage and literally milli watts, make a difference with respect to performance and operations. And so they headroom this allowed in the power delivery path for drops associated with current delivery gets further and further reduced. And that's why, vertical power delivery is an enabling technology that ultimately results in higher performance AI processors. And needless to so say our performance is what this all about and that's why you name it, every one of the major contenders for opportunity in this space comes to the place that there is the technology.
John Dillon -- -- Analyst
I mean, that's incredible. I mean, you're saving 60 or 70 watts and you multiply that by the number of processors in a supercomputer data center, you're talking about some serious power savings.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Yeah. Now, to be clear, those are peak power draws, they're not necessarily the average power draws. But the system has got to operate also under in sometimes peak power draws. So these are complex issues and it's easy to realize them, but I think it's fair to say that we've taken a very holistic view of the entire problems at the point of root and solved it. And the solution comes back 48 volts. Some people say 48 volts is going to take a long time to take root in the data center space, absolutely not. It's -- 48 volts is being brought about not just because of the benefits of more efficient power delivery. I think ultimately the real driver is enabling the level of high performance that makes the solutions, our customer solutions more competitive relative to their own competition. That's what will drive 48 volt adoption in datacenters and ultimately the assembly market is also very powerful driver and that's a marketing with a conversion to 48 volt is happening. There is no question about it.
John Dillon -- -- Analyst
Along the same lines of the vertical, don't you also -- you've said many times you free up 10s (ph) and doesn't that also enables a higher performance computer because you have more I/O and can't you place supporting chips closer to the processor so the time that electrons go from the processor to the memory or another processor are shorter? So doesn't that also make a faster, higher performance computer?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Yes, because generally speaking with a lot our power delivery you are confining the egress for the signal IOs that to your point, provide the needed bandwidth for communication with other devices. So by going to the back and obviously going there requires solving all the problems that stand in the way of vertical power delivery, by going to the back, essentially the entire perimeter of the XPU is freed up. And we have applications where these capabilities are going to be taken to new orders of magnitude of performance, so a little of that going to blow away the level of performance of the best GPU of today.
John Dillon -- -- Analyst
Patrizio, that's the point that I'm excited about because I don't think the average person -- I don't think the average engineer understands that a power supply can be an enabling technology and to me that's what I get really excited about. So I've taken up a lot of time, so I am going to get back in the queue. Thank you very much.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Thank you. Any other question?
Operator
Yeah, the next question is coming from the line of Alan Hicks (ph). Please go ahead, sir. Your line is open now.
Alan Hicks -- -- Analyst
Yes, good afternoon.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Good afternoon.
Alan Hicks -- -- Analyst
You've been talking about opportunity in ASICs, high amperage ASICs. What kind of opportunity do you have there and what kind of applications are those?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So we're not going to name customers. As I suggested earlier, we have essentially every current application that we know of and that has generally been identified, so for instance, the recent balance story on AI, projecting growth of 50% per year level over the next five years to I think a $34 billion market by five years from now. There is a lot of names in that story. We're doing business with virtually every one of them. And that's because again in these applications what's needed is a level of current delivery and performance that cannot be supported otherwise. What has happened over the last few years is something that I think many of us would have had a hard time predicting. It wasn't that long ago that an Intel processor could be fed with less than 100 amps and could have provided all the performance that applications required. Only in a matter of few years, we've gone from less than 100 amps to a few hundred apps to 500, 600 amps with peaks of 1,000 amps to highest current application as of a few weeks ago it's going to be pretty close to 1,000 amps and this is coming in 2020.
So what is -- this has clashed, I mean, it's clearly driven by a need and that is the need to as suggested in the prepared remarks, fuel these devices that are running on Firefly lithography with very, very large currents of lower and lower voltages. And that is a compounded problem, because as suggested earlier by going to a lower voltage you run out of headroom for voltage. You are enabling more current delivery with acceptable levels of power dissipation. Obviously if you cut the voltage enough, you can feed it with double the current for the same power consumption within the ASIC, but ultimately all these applications are driven not by considerations of power savings. They are really driven by considerations of computing capability. And fundamentally, every competitor is looking to feed their ASIC with the most current that they can deliver and thermally managed. Now, thermal management is very capable, particularly with liquid cooling. So, the headroom there is made possible by advanced thermal management. The techniques has allowed these exponential rise in current consumption, which ultimately a proxy for computing capacity.
Alan Hicks -- -- Analyst
So there is main opportunity in AI area or supercomputing or how does that compare to the GPU opportunity?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Well, it's in both. I think we are in all the above, we are going to be in all the above.
Alan Hicks -- -- Analyst
Okay. So let's say it's as big an opportunity as GPUs or CPUs?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Well, they will have a common denominator need which we are, I believe, uniquely equipped to address. Their common denominator need is voltage delivery of less than 1 volt, typically, 0.8, 0.7, 0.6, 0.5 volts. Our currents, as suggested earlier, are rising, they have risen by an order of magnitude in the last few years. And for the time being, there is no end in sight as long as they can be thermally managed. So with the best thermal management techniques, you can easily get to applications that may consume in one device literally a few tens of thousands of amperes. And there is a value proposition there. It's a super computer in a very small space that can do all kinds of wonderful things.
Alan Hicks -- -- Analyst
Whether the supercomputer market in general, I know you get there huge projects, do you have -- do you expect any wins this year?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
We are engaged, again, with every significant competitors. They're all coming to Vicor for a good reason, which is we can deliver a lower power density, current capability, power distribution efficiency that nobody else can. And this is enabling, as suggested also in an earlier question, it's enabling technology. We're not a supplier of commodity solution, we are a partner that enables much higher level performance that can't be otherwise achieved.
Alan Hicks -- -- Analyst
I know you had a capacity win a year or so ago, it was about an $8 million order, if I remember right. What -- how big can these orders be for us, big supercomputer?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So there are many opportunities that are in the tens of millions of dollars per year range.
Alan Hicks -- -- Analyst
Okay, thank you very much.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
You're welcome.
Operator
The next question is coming from the line of James Lieberman (ph). Please go ahead sir. Your line is open.
James Lieberman -- -- Analyst
Thank you and greetings. Can you give any further color or timing on automotive adoption and could the adoption happen independent of the timing of autonomous vehicle rollout? In other words, would it just happen because you've got multiple supercomputers onboard, more and more cars? Is that going to be as equally a motivating factor?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So we've been working with the company in that space which we believe has the highest, the most capable autonomous driving system, level 5 driving system. And scale up of that should happen independently of other initiatives that we've been pursuing of late with the hiring of EVP for global automotive initiatives. But before too long that opportunity is going to be complemented by a number of other opportunities that are not necessarily related to autonomous driving, they are related to the electrification of vehicles, the 48 volt system, IB systems that have dual, 12 and 48 volt buses, a conversion between those buses, 48 to 12, 12 to 48. There is a plethora of requirements and opportunities where very high density, lightweight, efficiency, modularity, scalibilty, cost-effectiveness play a role with respect to creating opportunity. Our team has been visiting OEMs in Japan, in Europe, in the US and the universal response from all of these companies is they are blown away by the capability of our technology. They actually want us to be a Tier 1 to them with respect to our capabilities and we're pursuing a combination of initiatives to make that happen as quickly as possible.
We're the caution here. Nothing moves very quickly in automotive and that's mitigated to some degree in today's automotive industry, which as we know is challenged to adapt to changing competitive landscape. So it's not moving at the glacial speed of earlier times, but it is still, for a variety of reasons, progressing in terms of the cycle of initial evaluation, designing, validation and scope for production, it's still moving at a slower pace than some of the market opportunities that we referenced earlier which can turn from planting a seed to volume production in nine months or a year.
I think the time scale that we should all be thinking of with respect to our presence in automotive in a meaningful way or the scale comparable to some of these other markets that timescale is beyond the three, four years. It's not shorter that that.
James Lieberman -- -- Analyst
Thank you very much. That's quite helpful.
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Thank you. If there is one more question?
Operator
Yes. There is a question left. And it is coming from the line of John Dillon. Please go ahead. Your line is open.
John Dillon -- -- Analyst
Hi, Patrizio. Can you give some more color on the front end products, in particular, when do you think you'll start seeing a revenue pickup on those and any kind of significant revenue from those products?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
So we're seeing more instances of combined opportunities with point of load. So recent example of a customer where we've been working for the very advanced point of resolution, wanting to incorporate a RFM front-end. With the other firms as we currently have it, we have a solution which based on earlier generation control. We are progressing rapidly to what we call 4G control. We're rolling out 4G in a variety of products, including a more advanced RFM that will be even denser and even more cost-effective. So we see this front-end opportunities beginning to play out in scale over the next year. Initially with the existing RFM which is based on older generation control. But once we introduce 4G-based solutions, we see because of their cost attributes and even higher performance attributes, we see opportunities for bigger uptake.
John Dillon -- -- Analyst
When you say over the next year. I mean, like for example, when do you expect to get like maybe let's say $10 million in revenue, would that be a year from today or could that be six months from today?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
I think you would be closer to a year from today.
John Dillon -- -- Analyst
And like six months, could you expect a couple of million or $5 million or?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Well, I think it's on the scale. It doesn't really move the needle. So I think the way we should be thinking about this to avoid losing the forest for the trees is what moves the needle in the short term is broad penetration of AI application, supercomputing applications that's moving the needle. I think front ends complementing those point of load applications will provide another wave of opportunities because as we discussed in the past, they can literally at every one account, in every application double the revenue opportunity. And then as I suggested earlier, the automotive initiative that's even further into the future. So in the short term, we're working our major opportunities, which are still in the center space, they are still with AI, GPUs, XPUs, CPUs of various kinds. Those are their near-term opportunities.
John Dillon -- -- Analyst
Okay. Great. And the NBMs, when do you think you'll start seeing some kind of significant revenue from those?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
We have a long design wins. By the way automotive is another opportunity for the NBM but we have quite a few wins in a variety of other end applications. I mean, that too is a device. We're now upgrading to 4G and that will make it even more efficient and more capable even more cost-effective. So we're moving across all of these opportunities from a product development perspective, being about next generation control technology that provides for more flexibility, more performance, lower costs, lower count and we see this initiatives as bearing fruit in the order that I have outlined the a little while ago.
John Dillon -- -- Analyst
So it would be similar to the front-end type stuff, maybe hit a $10 million run in a year from now or so?
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
I think, the opportunity for NBMs is quite significant, is another example of a product capability without equal. It's far smaller than anything else out there and there would be many tries, including some failed tries of that, not from us.
John Dillon -- -- Analyst
Okay. Jim, you mentioned that if the tariff stuff goes away, you might see an acceleration of bookings. Does that mean we could possibly -- and I don't know you're not going to commit to this, but we could possibly see numbers better than we talked about earlier if the tariffs go away?
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Let's not speculate about what might happen if the tariffs go away in terms of the impact on near-term bookings. I don't know what the lag would be, but I don't think there would be a large lag and certainly this will be a very beneficial development in terms of penetration of the Chinese market which is a very substantial market.
John Dillon -- -- Analyst
Great. Thank you very much guys. Appreciate it.
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Thank you. We will be talking to you in a few months.
Operator
Everyone, that concludes your conference call for today. You may now disconnect. Thank you so much for joining and have a lovely day. Goodbye.
Duration: 73 minutes
Call participants:
James A. Simms -- Corporate Vice President, Chief Financial Officer, Treasurer, and Secretary
Richard J. Nagel -- Corporate Vice President, Chief Accounting Officer
Patrizio Vinciarelli -- Chairman of the Board, President and Chief Executive Officer
Quinn Bolton -- -- Analyst
Matthew Vigneau -- -- Analyst
John Dillon -- -- Analyst
Alan Hicks -- -- Analyst
James Lieberman -- -- Analyst
Transcript powered by AlphaStreet
This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company's SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.
