Image source: The Motley Fool.
Coherent Inc (COHR)
Q1Â 2020 Earnings Call
Feb 5, 2020, 4:30 p.m. ET
Contents:
- Prepared Remarks
- Questions and Answers
- Call Participants
Prepared Remarks:
Operator
Good day and welcome to the Coherent's First Quarter Fiscal Year 2020 Financial Results Conference Call. All participants will be in a listen-only mode. [Operator Instructions] I would now like to turn the conference over to introduce Mr. Bret DiMarco, Executive Vice President and General Counsel. Please go ahead.
Bret DiMarco -- Executive Vice President and General Counsel
Thank you, Sean and good afternoon everyone. Welcome to today's conference call to discuss Coherent's results from its first fiscal quarter ended December 28th 2019. On the call with me are John Ambroseo, our President and Chief Executive Officer and Kevin Palatnik, our Executive Vice President and Chief Financial Officer. I would like to remind everyone that some information provided during this call may include forward-looking statements including without limitation, statements about Coherent's future events, anticipated financial results, business trends, and the expected timing and benefit, if any, of such trends. These forward-looking statements may contain such words as project, outlook, future, expects, will, anticipate, believes, intends or referred to as guidance. These forward-looking statements reflect beliefs, estimates, and predictions as of today and Coherent expressly assumes no obligation to update any such forward-looking statements. These forward-looking statements are only predictions and are subject to substantial risks, uncertainties, and assumptions that are difficult to predict and may cause actual results, performance or achievement to materially differ from those expressed or implied by these forward-looking statements.
Factors that could cause or contribute to such differences include, but are not limited to, risks associated with global demand acceptance and adoption of our products, the worldwide demand for flat panel displays and adoption of OLED for mobile displays, the pricing and availability of OLED displays, the demand for and use of our products in commercial applications, our ability to generate sufficient cash to fund capital spending or debt repayment, our successful implementation of our customer design wins, our and our customers' exposure to risks associated with worldwide economic conditions, in particular in China and the Eurozone, our customers' ability to cancel long-term purchase orders, the ability of our customers to forecast their own end market, our ability to accurately forecast future periods, continued timely availability of products and materials from our suppliers, our ability to timely ship our products and our customers' ability to accept such shipments, our ability to have our customers qualify our products, worldwide government economic policies including trade relations between the United States and China, our ability to integrate the business of Rofin and other acquisitions successfully, manage our expanded operations and achieve anticipated synergies, our ability to successfully manage our planned site consolidation projects and other cost reduction programs, and to achieve the related anticipated savings and improved operational efficiencies, the impact on global trade arising from coronavirus related actions by world governments and other risks identified in the company's SEC filings. For a detailed description of risks and uncertainties, which could impact these forward-looking statements, you should review Coherent's periodic SEC filings including its most recent Form 10-K, Form 10-Q and Forms 8-K including the risks identified in today's financial press release. I will now turn the call over to John Ambroseo, our President and Chief Executive Officer.
John R. Ambroseo -- President and Chief Executive Officer
Thanks, Bret and welcome everyone to the call. There are several encouraging takeaways from our first fiscal quarter of 2020. The book-to-bill was well above 1 due to strong demand from multiple applications, the full-year outlook is improving in certain key markets, and competitive dynamics in China while still aggressive are mostly unchanged. The news is positive across the microelectronics market. Display orders were up significantly for LineBeam systems and service. The system orders were for LineBeam 1000's destined to China. This is the third consecutive quarter that we have received new system orders which aligns well with our prior industry commentary on Phase 2 investments. The increase in service orders reflects higher demand for OLED equipped smartphones in the fourth calendar quarter of 2019. In addition to the ELA orders, bookings for OLED cutting using short pulse and CO2 lasers were also up as the industry prepares for a projected 60% ramp in flexible OLED units in 2020. There was a small contribution from foldable displays in the 2020 ramp, but the penetration is likely to remain low for two years to three years as manufacturers and suppliers lock down the specs and material sets.
Following CES, the number of predictions and questions regarding microLEDs has, to no one's surprise, gone up. The demos at CES from the likes of Samsung, Sony and others were impressive. Samsung's Wall covered 292 inches and tiles could be added while the display was running. The technology clearly has potential, but costs remain prohibitive. It will likely take years for microLED to achieve mass market viability. The full-year outlook for semi capex spending changed dramatically in the last 90 days with TSMC and Samsung both announcing higher capex spending. TSMC is reportedly adding capacity at 5-nanometers and 7-nanometers for AI, servers, and 5G chips. Samsung has reportedly seen renewed demand for memory. Our OEM integrator partners responded by raising their build plans for a variety of inspection and metrology tools. Consequently, our laser orders for semi applications were up sharply on a sequential basis. Our service bookings benefited from sustained high utilization and the timing of annual service contracts. Rounding out the microelectronics picture is API, which also enjoyed double-digit sequential growth in orders arising from increased service demand and marketing subsystems for semiconductor chips. We are also seeing an uptick for 5G related technology due to Chinese government programs to drive adoption. Printed circuit board designs for 5G are currently trending toward 45 micron to 50 micron HDI's that support 20% plus higher circuit density. These requirements should drive a double-digit increase in HDI tool demand during calendar 2020. We also expect to see a corresponding demand uptick in the upcoming quarters for lasers used to manufacture 5G antennas.
The materials processing market appears to be stabilizing. PMIs in North America signal modest expansion. China's PMI moved into positive territory on the strength of domestic demand although exports are still lagging. Europe still faces headwinds partially due to a depressed global market for autos and Germany's PMI is well below the Eurozone average. The data for our business reflects a stabilizing market. The book-to-bill was 1 for our seasonally adjusted first fiscal quarter and bookings were within a few percent of the prior year period. Within the various sub-markets, orders for high power CO2 lasers used in cutting outperformed the broader cutting market and medical device manufacturing systems held up well following a very strong prior quarter. Orders for automotive applications were up sequentially, but the overall market conditions remain challenging due to weak automotive demand and the shifting sands of portfolio mix from internal combustion engines to electric vehicles. Competition in the Chinese market is rising for components and lasers. Chinese laser manufacturers are sourcing more pump diodes domestically due to pricing and to a desire or directive to become independent from western suppliers. We have heard from end users that domestic Chinese fiber laser manufacturers are taking share at the 3 kilowatt to 6 kilowatt power level. As output powers increase, manufacturers will shift to longer wavelength pumps, which currently favors Western diode suppliers.
Instrumentation and OEM component bookings were lower following a record-setting performance of prior quarter. This is neither surprising nor indicative of a change in long-term demand or market share. Bioinstrumentation applications like flow cytometry are experiencing greater clinical adoption. One of the capabilities that is driving this trend is the ability of UV activated reagents to study small particles that are critical to cell functionality. Our OBIS platform is the leading laser solution for exciting ultraviolet reagents and we expect multi-year growth from this product platform. Our medical business is also in solid shape. One of our OEM integrators is making inroads in China for cataract therapy. The aesthetic business saw good demand from new and legacy procedures and finally, the aerospace and defense business is on track for strong double-digit annual growth, mostly in conjunction with North American clients. I'll now turn the call over to Kevin Palatnik, our Chief Financial Officer.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Today, I'll first summarize fiscal first quarter 2020 financial results then move to the outlook for fiscal Q2 2020. I'll discuss primarily non-GAAP financial results and ask that you refer to today's press release for a detailed description of our GAAP results as well as a reconciliation between GAAP and non-GAAP financial results. The non-GAAP adjustments relate to stock-based compensation expense, amortization of intangible assets and restructuring costs, the related tax adjustments, and tax adjustments for stock based compensation. The full text of today's prepared remarks and trended GAAP and non-GAAP supplemental financial information will be posted on the Coherent Investor Relations website. A replay of this webcast will also be made available for approximately 90 days following the call.
Fiscal first quarter 2020 financial results for the company's key operating metrics were total revenue of $320.8 million, non-GAAP gross margin of 38%, non-GAAP operating margin of 9.4%, adjusted EBITDA of 14.3%, and non-GAAP EPS of $0.86. Total revenue for the fiscal first quarter was $320.8 million and came in above the midpoint of our previously guided range due primarily to moderate stability rather than significant weakness in the materials processing end market. Our revenue mix by market for Q1 was microelectronics 41%, materials processing 27%, OEM components and instrumentation 22%, scientific and government 10%. Geographically, Asia accounted for 51% of revenues in the fiscal first quarter, the U.S. 24%, Europe 20%, and rest of the world 5%. Asia includes two territories with revenues greater than 10% of sales. We had one customer in South Korea related to large flat panel display manufacturing that contributed more than 10% of our fiscal first quarter revenues. Other product and service revenues for the fiscal first quarter were $117 million or approximately 36% of sales. Other product revenue consists of spare parts, related accessories and other consumable products and was approximately 32% of sales. Revenue from services and service agreements was approximately 4% of sales. Total service revenues increased sequentially by approximately $3 million as our integrators and end users replenished their service stock.
Fiscal first quarter non-GAAP gross profit, excluding stock-based compensation costs, intangibles amortization, and restructuring was approximately $122 million. Non-GAAP gross margin was 38% for Q1 and came in at the midpoint of our previously guided range. Non-GAAP operating expenses increased by approximately $2 million, primarily due to factors relating to our new fiscal year including merit and fringe increases and other miscellaneous expenses. This resulted in a non-GAAP operating margin of 9.4% for the fiscal first quarter and also came in slightly above the midpoint of our previously guided range. Adjusted EBITDA was 14.3% in fiscal Q1.
Turning to the balance sheet, non-restricted cash, cash equivalents and short-term investments were approximately $350 million at the end of fiscal Q1, an increase of approximately $44 million compared to the end of last quarter. We did not make any voluntary payments against our term loan, and at the end of fiscal Q1, the outstanding amount of the term loan was approximately $405 million. Accounts receivable DSO was 66 days compared to 72 days in the prior quarter. The net inventory balance at the end of the fiscal first quarter was approximately $450 million, an increase of $7 million from the prior quarter primarily due to foreign exchange.
Now, I'll turn to our outlook for our second fiscal quarter of 2020. Let me say at the outset, like other multinational corporations with sales, service and operations in mainland China, we continue to monitor the rapidly evolving situation related to the coronavirus. The Chinese government's actions, particularly from quarantining individuals in and around major hubs, such as Wuhan, and restricting the opening of businesses, will likely have an impact on our ability to sell our products and service our installed base in impacted areas. We continue to monitor the situation in China as well as actions being discussed and rolled out by other world governments. Our second fiscal quarter outlook attempts to reflect these uncertainties and includes an approximate $20 million to $25 million reduction in revenue at the midpoint and a wider than normal revenue range.
Having said that, revenue for fiscal Q2 is expected to be in the range of $290 million to $330 million. We expect fiscal Q2 non-GAAP gross margin to be in the range of 35% to 39%. Non-GAAP gross margin excludes intangibles amortization of approximately $11.2 million and stock compensation costs estimated at $1.4 million. Non-GAAP operating margin for fiscal Q2 is expected to be in the range of 4% to 8%. This excludes intangibles amortization estimated at a total of $12.5 million and stock compensation expense of a total of approximately $9.5 million. As you work through your models, you'll note that operating expenses show healthy sequential growth. This increase is primarily due to the our fiscal Q2 being a 14 week quarter vs. the typical 13 week quarter as well as less holiday and vacation in our March quarter. Other income and expense is estimated to be an expense in the range of $2 million to $3 million. We do not include transaction gains and losses related to future changes in foreign exchange rates in our OI&E outlook. We expect our fiscal Q2 non-GAAP tax rate to be in the range of 24% to 25%. We are assuming weighted average outstanding shares of approximately 24.3 million for the fiscal second quarter. And finally, we have also received board authorization to repurchase up to $100 million in the company's common stock over the next year. I'll now turn the call back over to the operator for a Q&A session.
Questions and Answers:
Operator
Thank you. We will now begin the question-and-answer session. [Operator Instructions] Our first question today will come from Jim Ricchiuti with Needham & Company. Please go ahead.
James Ricchiuti -- Needham & Company -- Analyst
Thank you. Good afternoon. The genre, Kevin. I'm wondering if you can give us a little bit more color on the the impact that you're seeing from the coronavirus. Is that $20 million to $25 million impacting you in any particular one vertical more than the other?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
It's impacting us across the markets everything from the scientific business to microelectronics. The current situation I think, as you're aware, is the country is on an extended holiday following the Lunar New Year and until we have people back in the offices, our employees as well as those of customers and suppliers, we won't be able to fully assess what the quarter is going to look like.
James Ricchiuti -- Needham & Company -- Analyst
And John, looking at what you're seeing in terms of the recovery in the FPD market, do you anticipate a mix similar to what you're seeing where you're calling out some orders for I believe the LineBeam 1000. Is that what you're anticipating or do you see the cycle potentially changing and shifting more toward some of the larger LineBeam machines over the course of the year.
John R. Ambroseo -- President and Chief Executive Officer
I think it's going to be -- first of all, it's a good question, Jim, I think it's going to be largely situational with individual customers based on their own competency and also based on the availability to secure other systems as part of the supply chain. While we are not the long pole in the tent in terms of deliveries, there are some other very difficult to procure systems that are part of these these 1500 factories and those lead times right now seem to be exceptionally long. That would probably have an impact on the customers' thinking especially as some of these customers are trying to position themselves to be a supplier of record for next year's smartphones or I should say, we're in 2020, for later this year.
James Ricchiuti -- Needham & Company -- Analyst
Got it and last question for me, I'll jump back in the queue, but just the, again on the flat panel display business, the strength you're seeing in the cutting market. I mean that's clearly something that's little different from the last cycle. Is there any way to help us think about the potential for you guys in that business over the course of the next one to two years.
John R. Ambroseo -- President and Chief Executive Officer
Well, the ASPs are substantially different between the annealing market and the cutting market and while the unit volume for cutting is going to be obviously much higher than it is for annealing, you're still probably in order of magnitude different in market size.
James Ricchiuti -- Needham & Company -- Analyst
But your competitive stance in that market is a little bit more competitive, but it sounds like you feel like you are and that's where awards [Phonetic] come out I mean, do you feel like you're holding your own in that market gaining share?
John R. Ambroseo -- President and Chief Executive Officer
I think we look at 2020 as a year that we're going to gain share and certainly the early opportunities in this market have favored us.
James Ricchiuti -- Needham & Company -- Analyst
Okay, thank you.
Operator
Our next question will come from Blayne Curtis with Barclays. Please go ahead.
Thomas O'Malley -- Barclays -- Analyst
Hey guys, this is Tom O'Malley on for Blayne Curtis, I had a question on the guidance in the 14-week quarter. I think company has kind of forecast a little bit differently there. Normally opex runs a little bit ahead and you don't always get the benefit on the revenue side for the 14 week quarter, could you just talk about what your expectations are when you were forecasting, are you including that additional week there in the revenue or are you being conservative thinking you may not get all of that benefit?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Yeah, you're right Tom, this is Kevin. There is a little bit of a mismatch in the back-end on ability to bring revenue in compared to the expense -- the expenses are definite [Phonetic] from a planning or a forecasting standpoint that is included in guidance, but certainly the 14 weeks related to the quarter on the expense side, that's definitive, you can do that.
Thomas O'Malley -- Barclays -- Analyst
Okay and then the next one is really on the semi cap side, you guys, in your prepared remarks, spent a lot of time talking about forecast for both 5-nanometer and 7-nanometer. This year, obviously, it seems as though that semi cap is becoming a larger portion of the microelectronics bucket. Can you talk about how you see that turning over the course of the year, do you think that becomes a greater portion of that bucket and can that kind of help drive some additional upside versus where you guys were initially thinking this year?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
I guess I'll try to frame it this way. Semi appears that it's going to do better than we had forecasted at the beginning of the fiscal year largely to the two factors that I talked to earlier, which is both TSMC and Samsung upping their capex. As to whether or not it becomes a larger percentage of the microelectronics bucket, that's a little bit tougher to answer simply because we expect to see the display business start to pick up as we go through the year. So I think the short answer is on an absolute revenue basis. semi cap is probably going to do better than we had in the plan originally, but as far as what the mix is within microelectronics, a little too early to call that one.
Thomas O'Malley -- Barclays -- Analyst
Fair enough. Thanks guys.
Operator
Our next question will come from Mehdi Hosseini with SIG. Please go ahead.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Yes, two questions. Kevin, what would have been the absorption and the impact on operating margin if you were to add back the $20 million, $25 million of revenue that now has been adversely impacted by the coronavirus and I have a follow-up.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Yeah, Mehdi, we did 38% in the quarter. I suspect that we could achieve that or maybe even improve against that with the $20 million to $25 million back in.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Okay, I guess what I was trying to figure out is that $20 million, $25 million part of the drove [Phonetic] lower than corporate average margin or is that more like corporate average or [Phonetic] higher margin. That's what I was trying to figure out.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Mehdi, as John said earlier, right, the decrease is across the board, across all end markets. So in terms of the mix impact, it's across the board and that's why I said, without it -- without the impact, we probably would have been about the same or a little bit higher. That's the best I can do now.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Sure, thank you. And then one question for John. You turned more constructive on flat panel display sometime mid last year or even earlier and it now seems like the real inflection point is more in the latter part of 2020. How should I think about your way of communicating the pickup in booking and the lag in impact on the inflection point in revenue and specifically for flat panel display.
John R. Ambroseo -- President and Chief Executive Officer
Interesting question. I'm not sure I completely understand it, but let me give it a shot nonetheless. In 2019, we started the year with backlog in display and a dearth of orders. So as we move through through the year, we will continue to burn off backlog which means to equal or surpass 2019 in 2020, you have to have all those orders in place. So what you refer to as an inflection, I assume you mean when display revenues surpass the prior year, is that a correct assumption on my part?
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Yes.
John R. Ambroseo -- President and Chief Executive Officer
Well, then the answer is simple, you have to get the orders and build the backlog before you can move past the prior year period. I don't, perhaps I didn't communicate it as clearly as I could have, but I think that we were constantly talking about the fact that we were building 2020 and developing momentum into '21 and '22.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
And Mehdi, Kevin again here and remember, we have a six month lead time on these systems. So from an order or a booking to when we potentially see revenue, it's in the neighborhood of five months to seven months plus or minus that a month around the six month delivery.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
If I may inject just one quick follow-up, I think some of the confusion that has been going on for a few years started when you stopped providing booking or even backlog on a quarterly basis. Is there any chance that you can reinstate it. I think that would help with more clarity, but I'm just wondering if you would change your mind?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
No.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
And you want to elaborate or should we just --
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
I think that's a pretty clear answer, is it not?
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Okay, yes sir. Thank you.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Thanks, Mehdi.
Operator
Our next question will come from Larry Solow with CJS Securities. Please go ahead.
Peter Lukas -- CJS Securities -- Analyst
Yes, hi, it's Pete Lucas for Larry. You covered most of the stuff, just a macro question. Appears to be visibility on plans to open 20 or so fabs by 2023 and while timing is hard to predict, just wondered what's your confidence on this occurring and what's your thoughts on the risk of them not opening and the cycle getting elongated further either due to lower yields or other issues?
John R. Ambroseo -- President and Chief Executive Officer
Great question. It's hard to always predict how people are going to do in terms of yield improvement. It certainly has taken longer for companies other than Samsung to improve their yields thus far. The feedback that we're getting from a number of suppliers and certainly the comments that they're making publicly would suggest that they're going to ship much higher levels of OLED displays this year than they did in any prior year, so that's encouraging. I think you know the coronavirus could push things to the right a little bit and depending on how severe and how long it lasts, that could have an impact. It's very difficult at this juncture to predict what that explicit impact may be and I think that's as much as I could say at this point.
Peter Lukas -- CJS Securities -- Analyst
Yeah, fair enough. And if we were to assume that these fabs did open, do you think that the ones predicted so far would be enough to satisfy the demand for handset markets conversion to OLED?
John R. Ambroseo -- President and Chief Executive Officer
The accounts that we have and what we know about yields would say no, but you still need additional additional fabs. If you start to do the math that everyone gets to Samsung-like yields, then you could do a more explicit calculation, but if you do a mixture of yields, it gives you a very different result.
Peter Lukas -- CJS Securities -- Analyst
Very helpful, thanks. I'll jump back in the queue.
Operator
Our next question will come from Brian Lee with Goldman Sachs. Please go ahead.
Alex Marble -- Goldman Sachs -- Analyst
Hey, how's it going? This is Alex on for Brian. So going back to your prepared remarks on microLED, I was just wondering if you could provide a little more clarity on what the opportunity that you see is. I know you mentioned we're a bit or a few years away from costs being economic here, but I guess what are the main use cases from the device side and how large do you expect that opportunity to get?
John R. Ambroseo -- President and Chief Executive Officer
So as it stands today, I don't think a lot has changed since we first spoke about this a few years ago. MicroLED has a play in very small format displays. So things like AR and VR inserts where they are in close proximity to the eye and then clearly on very large displays, these walls are one example, but you would also imagine that microLED-based TVs could be a viable technology as you go forward. In the R&D phase, there are two processes where we have a meaningful play. The first is when you take the emitters off of the growth substrate and transfer them to a display substrate which is called laser induced forward transfer. A lot of that work is being done with excimer lasers similar or identical to the ones that are being used in the annealing process. For very small displays like the ones that are used in AR and VR, it's likely those will use annealed backplane for power and heat management. For the very large displays where the pixels are pretty far apart, you can probably use a more traditional backplane, but again, we're very early in the development of these things where, we, we mean the community, not just Coherent, is still finding out what the capabilities are and what the limitations are, but as we said, this puts us in the front playing in these devices right now for handset displays or LTPS enabled displays and looks to be more broad about it, we're in the backplane. So if you have devices where it's used in both, it sort of doubles our play. Is that helpful.
Alex Marble -- Goldman Sachs -- Analyst
Yeah, it's super helpful. Appreciate that and I guess kind of an unrelated another question here. We've heard some things about new product roll outs including maybe Samsung A5 [Phonetic]. Do you have any color on that? What have you heard in the market.
John R. Ambroseo -- President and Chief Executive Officer
The rumors are raging around A5. There have been I think two or three false starts on A5 over the last few years. We currently don't have it in our plans. So we would view that as an upside opportunity and we're well positioned to be able to address any needs they may have, but until we know what the mix is going to be in the plant, whether it's going to be mobile or mobile and TV and how much is going to be allocated to each, it's difficult to judge the size of the opportunity, but we know we have the capacity in place to address it regardless.
Alex Marble -- Goldman Sachs -- Analyst
Okay, got you. I appreciate the insight.
Operator
Our next question will come from Mark Miller with The Benchmark Company. Please go ahead.
Mark Miller -- The Benchmark Company -- Analyst
Thank you for taking my question. Just interested in compared to the first half, what could be the upside drivers of second half such as more memory equipment going into the fabs, especially are you serving the domestic fabs in China. Some of these fabs are coming up, 5G will be another area, it might be a driver. I'm just wondering what do you think will be the -- potential be an upside driver in second half revenues.
John R. Ambroseo -- President and Chief Executive Officer
Well, I'd say compared to where we were when we started doing the plan, which would have been sort of the June time frame of last year, the single biggest change has been in the semi market. The early projections were semi was going to be soft and probably have a somewhat down year. We still expect it to outperform the market. I think we communicated that in either the prior call, Paul, or the one before that. So this is a meaningful change because the increases in capex spending from two very big industry players is meaningful. What the explicit timing will be is obviously subject to some conversation. As far as China goes, to the extent that they're relying on metrology and inspection equipment provided by non-Chinese players, that is also an opportunity for us. I'd say that the view that we get from our folks inside China is that there is even a greater sense of urgency to become independent on the integrated circuit front than they were previously. There still seems to be somewhat of a gap in capability and then, of course, this is the third or fourth time that I've mentioned coronavirus, it's a curve ball that we all have to deal with, but that's, if anything, it is a delay in timing, it's not a delay in programs.
Mark Miller -- The Benchmark Company -- Analyst
What about 5G, you picked up some revenues for circuit board applications and antennas. Do you see that accelerating because the 5G ramp is really supposed to come on in the second half of the year?
John R. Ambroseo -- President and Chief Executive Officer
So the answer is, we are optimistic about 5G opportunities, certainly been talking about them for a while. It remains to be seen who the network or who the equipment suppliers are for 5G. The hostilities between the U.S. and certain Chinese vendors will have to be reconciled in one way or another as to where that capacity is going to be put in place, but the things that have been available early have been encouraging for us. We've won our fair share and probably a bit more of them.
Mark Miller -- The Benchmark Company -- Analyst
And finally, the well-known fiber laser competition in China, you mentioned diodes, are you seeing an increasing competition in any non-fiber laser space in China and what would be the area?
John R. Ambroseo -- President and Chief Executive Officer
No, there has long been local suppliers of things like glass-based CO2 lasers, low power UV lasers, that really hasn't changed.
Mark Miller -- The Benchmark Company -- Analyst
Thank you.
Operator
Our next question will come from Nick Todorov with Longbow Research. Please go ahead.
Nikolay Todorov -- Longbow Research -- Analyst
Thanks. Hello, guys. Going back to the question of ELA mix, I'm sensing that mix relative to life cycle could be different here maybe because the mix of customers is so much different, but I guess the question is what are the factors that could lead to a higher mix of your of 1000s systems versus 1500s, given that assuming funding is not an issue and 1500s are so much superior in terms of throughput and ROI.
John R. Ambroseo -- President and Chief Executive Officer
So again Nick, I think the two things that will come into it is customer competency. If they have experience at the 1000 format, are they more likely to continue to deploy 1000? The answer is, I think, yes and then the availability of equipment outside of the annealing tools from other manufacturers that are currently capped in terms of capacity. If you have to wait 18 months to get a piece of hardware, you say, well, I'm going to wait the 18 months and miss my market window or am I going to go for a format that I can deploy much more quickly and jump into the market. I think that's what it really comes down to?
Nikolay Todorov -- Longbow Research -- Analyst
Okay and on materials processing, book-to-bill again above 1. I think last quarter you talked about having a large semi-annual order driving a little bit better bookings. Can you talk about this quarter, if you've seen maybe a more diverse set of short-term bookings in materials processing or was that again maybe a larger order that is more extended?
John R. Ambroseo -- President and Chief Executive Officer
It was a mix of products, I'd say the largest areas were probably general consumer products production and then components that are used in fiber lasers were probably the two areas that had the most activity within our materials processing bucket and neither of those are terribly surprising.
Nikolay Todorov -- Longbow Research -- Analyst
Okay, and lastly from me, you talked about last quarter potentially recovery in the services side from the display industry, maybe taking a quarter or two to turnaround. It seems like it's happening much quicker than expected. Can you talk about some of the factors. I think Samsung talked about having also lower utilization in the March quarter. So was it just inventories have gotten so low and they had to start replenish those or what are some of the drivers there?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Yeah, hey Nick, it's Kevin. This is another case where we've got one good data point in a row. So I wouldn't extend that out beyond the current quarter. We did improve services revenues by $3 million in quarter and primarily that was some of our end customers, integrators replenishing their stock. As we talked throughout late '19, they were constantly lowering their inventory levels to manage cash and we finally see that take a bit of an uptick, but again it's a single data point, let's not extrapolate off that just yet.
Nikolay Todorov -- Longbow Research -- Analyst
Got it, thanks. Good luck guys.
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Thank you.
Operator
Our next question will come from Andrew DeGasperi with Berenberg. Please go ahead.
Andrew Degasperi -- Berenberg -- Analyst
Yeah, thanks. I just wanted to ask a question regarding your comments on the competition that 3 kilowatt to 6 kilowatt from the Chinese laser makers. Can you maybe elaborate on that. Like, do you think they've achieved a certain degree of reliability at this stage that a lot of integrators will now potentially replace or potentially use those Chinese laser makers for their needs?
John R. Ambroseo -- President and Chief Executive Officer
So what we have heard is that they're becoming more competitive in the 3 kilowatt to 6 kilowatt range than they were at any time in the past year or so. This is, I don't think this is a pricing discussion because we know the pricing is aggressive. This probably is on a reliability and performance basis that those comments are being made and look, they have done this. The Chinese manufacturers have done this previously at lower power levels. It's not unreasonable to assume that they would master higher power levels on a go-forward basis. So that's what the comment is about. It appears that they are mastering higher power levels and they are gaining share in that range in the Chinese market.
Andrew Degasperi -- Berenberg -- Analyst
Got it and then maybe secondly, can you maybe update us on the defense side, anything that's trending on that end.
John R. Ambroseo -- President and Chief Executive Officer
You know the number of opportunities is becoming larger than we had anticipated. Now a lot of these are early stage projects rather than things that are ready for deployment but the programs that we've been involved in have done well. They primes keep checking all the boxes they need to check to take these things forward and some of them are now going into field deployment. That's generally good news and our view that this becomes a meaningful piece of business over the next few years, I don't think there's anything that would change our position there.
Andrew Degasperi -- Berenberg -- Analyst
Great, thank you.
Operator
Our next question is a follow-up from Mehdi Hosseini with SIG. Please go ahead.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Yes, thanks for taking my follow-up. Two follow-up questions. Kevin, when you think about the second half of calendar year, how should I think about leverage and operating margin. And I ask that as a way to figure out how the mix changes from the first half to the second half?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Yeah, Mehdi, so as we've talked about in the past as we've stated publicly, our ELA or our LineBeam machines are accretive and so as we continue to take orders and then deliver against orders in the future that will have very good leverage to the P&L. I'm not going to get into specific timing but as we've talked about in the past, we took order in the June quarter, we took more orders in the September quarter and now more orders in the December quarter and you know roughly at a minimum six month lead time, you can map out or at least model some revenue scenarios, but given the accretive nature of these machines, they will have leverage on the P&L for sure.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Great and the second follow-up for you and John, is there any update on the CEO transition?
John R. Ambroseo -- President and Chief Executive Officer
The process is ongoing and when we are ready to make an announcement, one will be made.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Where are we in the process?
John R. Ambroseo -- President and Chief Executive Officer
Mehdi, this is a confidential search. We're not going to give periodic updates as to where we are.
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Thank you.
John R. Ambroseo -- President and Chief Executive Officer
Thanks, Mehdi.
Operator
Our next question is a follow-up from Mark Miller with The Benchmark Company. Please go ahead.
Mark Miller -- The Benchmark Company -- Analyst
Just for modeling, you indicated the opex will be up next quarter because of the extra week. Well the opex, it won't scale as much up in SG&A because you're not selling as much or will they both [Phonetic] rise by roughly the approximate percentage of the extra week?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Yeah, it's the latter mark, it will scale -- from 13 weeks to 14 weeks that impacts the functions across -- all functions, if you will. So it will scale in quarter and then the following quarter is back to a 13-week quarter, so we should see some efficiencies there.
Mark Miller -- The Benchmark Company -- Analyst
Okay, but both SG&A and R&D will scale approximately the same?
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
Well, they're different absolute amounts but yes, they will scale because of that additional week.
Mark Miller -- The Benchmark Company -- Analyst
Okay, thank you.
Operator
This will conclude today's question-and-answer session. I would now like to turn the conference back over to Mr. John Ambroseo for any closing remarks.
John R. Ambroseo -- President and Chief Executive Officer
Thanks, Sean. I'd like to thank everybody for participating and we'll look forward to doing this again in a few months.
Operator
[Operator Closing Remarks]
Duration: 44 minutes
Call participants:
Bret DiMarco -- Executive Vice President and General Counsel
John R. Ambroseo -- President and Chief Executive Officer
Kevin Palatnik -- Executive Vice President and Chief Financial Officer
James Ricchiuti -- Needham & Company -- Analyst
Thomas O'Malley -- Barclays -- Analyst
Mehdi Hosseini -- Susquehanna International Group -- Analyst
Peter Lukas -- CJS Securities -- Analyst
Alex Marble -- Goldman Sachs -- Analyst
Mark Miller -- The Benchmark Company -- Analyst
Nikolay Todorov -- Longbow Research -- Analyst
Andrew Degasperi -- Berenberg -- Analyst
