Logo of jester cap with thought bubble.

Image source: The Motley Fool.

DATE

Wednesday, Aug. 26, 2026 at 9:00 a.m. ET

CALL PARTICIPANTS

  • Investor Relations - Deborah Pawlowski
  • President and Chief Executive Officer - Jennifer Slater
  • Senior Vice President and Chief Financial Officer - Matthew Pauli

TAKEAWAYS

  • Fiscal Year Net Sales -- $579.4 million, growing 2.5% to reach record annual levels.
  • Fiscal Year Gross Margin -- 16.5%, representing an expansion of 150 basis points from fiscal 2025.
  • Fourth Quarter Net Sales -- $151.8 million, remaining essentially unchanged compared to the prior year period.
  • Adjusted Diluted EPS -- $2.06 for the fourth quarter, matching the result from the same period last year.
  • EV Program Impact -- $10 million revenue headwind for the full year, including $3.2 million in the fourth quarter, due to customer cancellations of specific programs.
  • Pricing Benefits -- $11 million in price captures for the full year and $1.4 million in the fourth quarter, which helped offset manufacturing cost pressures.
  • Cash and Equivalents -- $108.2 million at year-end, up from $84.6 million at the end of the prior fiscal year.
  • Total Debt -- Zero, as the company paid down the remaining $1 million on its joint venture credit facility during the fourth quarter.
  • Full-Year Operating Cash Flow -- $46.3 million, driven by transformation initiatives and a reduction in working capital.
  • North American Production Outlook -- A 2% decline projected for fiscal 2027, with a 6% decline expected at the three largest customers for the company.
  • Fiscal 2027 Capital Expenditures -- $12 million planned, which is less than 2% of sales and focused on automation and modernization.
  • Mexican Peso Sensitivity -- A 5% change in the U.S. dollar relative to the peso can affect annual manufacturing costs by approximately $4 million before any hedging activity.
  • Restructuring Savings -- $6 million in savings realized during the fiscal year, with total transformation savings of $9.5 million delivered since fiscal 2025.
  • Assembly Automation -- 16 new automated assembly stations added, bringing the total to 9% of all assembly stations.
  • Capital Returns -- $7.4 million used to repurchase approximately 110,000 shares in the fourth quarter, representing 2% of outstanding shares.
  • Share Repurchase Authorization -- $40 million available for future repurchases under a newly approved program.
  • Full-Year SAE Expenses -- $68.8 million or 11.9% of sales, compared with $61.8 million or 10.9% in fiscal 2025, reflecting investments in transformation.
  • Effective Tax Rate Outlook -- 24% to 25% for fiscal 2027, following a quarter impacted by $2.9 million in discrete adjustments.
  • Long-Term Gross Margin Target -- 18% to 20%, assuming the Mexican peso returns to its five-year average of $19.50 per dollar.
  • Milwaukee Facility Space -- 91,000 square feet, or 26% of production space, freed up through consolidation and manufacturing flow improvements.
  • Manufacturing Rightsizing -- 7% reduction in headcount as part of operational improvements to improve the margin profile.

Need a quote from a Motley Fool analyst? Email [email protected]

RISKS

  • CFO Pauli warned of "softer industry production in fiscal 2027," including a projected 6% decline at its three largest customers.
  • Pauli stated that "we will face headwinds from foreign currency" in the upcoming fiscal year, noting the peso started the year at 16.90 compared to the fiscal 2026 average of 18.
  • Pauli noted that transformation actions are expected to help offset a "typical 30% decremental impact to gross profit on lower sales" as production volumes weaken.

SUMMARY

Management reported record annual revenue and gross margin expansion for fiscal 2026 despite external pressures from currency fluctuations and cancelled electric vehicle programs. The company stated that its transformation plan is delivering results through disciplined pricing and operational improvements, including a significant reduction in debt to zero. Strattec transitioned its commercial approach to engage customers earlier in the development process while reorganizing its product portfolio into three strategic pillars. For fiscal 2027, management expects production declines among its major customers and intends to use its cash position for automation, opportunistic share buybacks, and potential acquisitions to gain scale.

  • The company rebranded its product portfolio into three focus pillars: Permission for secure entry, Motion for powered access, and Hold for latching products.
  • CEO Slater stated, "This framework better aligns our commercial, innovation and engineering teams around customers' evolving access needs and future program opportunities."
  • Management is transitioning from a reactive sales model to a future-looking pipeline development process to capture long-cycle automotive programs.
  • The company is evaluating M&A opportunities to gain scale and diversify its customer base. CEO Slater noted, "something that fits in those product pillars so that we're not going too far out of our core is also important."
  • Strattec intends to pursue a sale-leaseback of its Milwaukee facility as the operation is now too large for current requirements.
  • New automated assembly stations generally have a payback period of less than one year, with management targeting further expansion beyond the current 9% automation level.

INDUSTRY GLOSSARY

  • OEM: Original Equipment Manufacturer, referring to automotive manufacturers like GM, Ford, and Stellantis.
  • SAE: Selling, Administrative, and Engineering expenses.
  • Mexican Peso (MXN): The currency of Mexico, where the company has significant manufacturing operations and exposure to exchange rate fluctuations.
  • Permission: A product pillar encompassing secure vehicle entry technologies such as mechanical and electronic locks.
  • Motion: A product pillar encompassing powered access systems like tailgates, liftgates, and sliding door mechanisms.
  • Hold: A product pillar encompassing latching products designed for vehicle safety and durability.
  • VAST Automotive Group: The branding under which Strattec's automotive access solutions are often marketed globally.
  • Non-GAAP: Financial measures that are not defined by generally accepted accounting principles, such as Adjusted EBITDA.

Full Conference Call Transcript

Operator: Greetings. Welcome to Strattec's Fourth Quarter and Fiscal Year 2026 Financial Results Conference Call. [Operator Instructions] Please note, this conference is being recorded. At this time, I'll turn the conference over to Deborah Pawlowski, Investor Relations for Strattec. Thank you. You may begin.

Deborah Pawlowski: Thank you, and good morning, everyone. We appreciate you joining us for Strattec's Fourth Quarter and Fiscal 2026 Financial Results Conference Call. Joining me on the call today are Jennifer Slater, our President and Chief Executive Officer; and Matthew Pauli, our Senior Vice President and Chief Financial Officer. Jen and Matt will review our fourth quarter and full year financial results, the progress we are making on our transformation and our outlook for fiscal 2027. You can find a copy of the news release and the slides that accompany our conversation today on the Investor Relations section of the company's website. If you are reviewing those slides, please turn to Slide 2 for the safe harbor statement.

As you are aware, we may make forward-looking statements during the formal discussion and during Q&A. These statements apply to future events that are subject to risks and uncertainties as well as other factors that could cause actual results to differ materially from what is stated on today's call. These risks and uncertainties and other factors are discussed in the earnings release and in other documents filed by the company with the Securities and Exchange Commission. You can find these documents on our website as well. I also want to point out that during today's call, we will discuss certain non-GAAP financial measures, which we believe are useful in evaluating our performance.

You should not consider this additional information in isolation or as a substitute for the results prepared in accordance with GAAP. We provided reconciliations of non-GAAP measures with the most directly comparable GAAP measures in the tables accompanying the earnings release and in the supplemental slides. So with that, I'll turn the call over to Jen, who will begin with Slide 3.

Jennifer Slater: Thank you, Deb, and good morning, everyone. Fiscal '26 was a year of progress as we continue to reshape Strattec into a more resilient, higher-performing business. We delivered record annual revenue of $579.4 million, expanded full year gross margin by 150 basis points to 16.5%, generated $46.3 million in operating cash flow and ended the year with $108.2 million of cash and no debt. In the fourth quarter, sales of $151.8 million were better than expected and essentially flat with the prior year period. These results were achieved in a dynamic automotive environment. Throughout the year, we managed fluctuating North American production levels, the evolving tariff environment, foreign exchange headwinds and customer cancellations of certain EV programs.

We believe that our fiscal '26 results are an affirmation that the transformation is delivering, our teams are executing and we have the resiliency to offset a meaningful portion of these external pressures through pricing, cost actions and operational improvement. During the year, we realized approximately $6 million of savings from restructuring actions. We also continue to invest in our commercial organization, innovation capabilities and the operating infrastructure needed to improve our margin profile. We are continuing to evolve our approach to growth. Automotive is a long cycle and cyclical industry, so it's critical that we engage customers earlier and more strategically in their development process.

This is relatively new concept for Strattec that historically did not have a process around a future-looking sales pipeline and only engaged with the customer when an RFQ was received. We have invested in our team and are in the early stages of developing the foundation around a future-looking development process with a focused product portfolio around 3 pillars: Permission, Motion and Hold. Permission includes secure vehicle entry technologies. Motion encompasses powered access systems and Hold includes latching products designed for safety, strength and durability. This framework better aligns our commercial, innovation and engineering teams around customers' evolving access needs and future program opportunities.

Our consistent cash generation also allowed us to return $7.4 million to shareholders in the form of share buybacks in the fourth quarter, and our Board of Directors has authorized a new $40 million stock repurchase program, which we intend to use to offset equity share dilution and opportunistically buy back shares. Slide 4 highlights the disciplined execution of our transformation plan. We are working to improve how the business operates every day. Since fiscal '25, we have implemented restructuring actions that have delivered $9.5 million of savings. This past year, we consolidated our test lab operations in Auburn Hills and continue to invest in equipment and improve manufacturing flow at our Milwaukee operations.

We also implemented new tools for sales pipeline management, financial consolidation, benefits administration and expense reporting. These technology innovations help us make better decisions, enhance accountability, simplify processes and create a more scalable operating platform. In addition, we introduced culture pillars centered on innovation, collaboration and accountability, reinforced by a recognition program that highlights team members who put those values into action. The culture element of our transformation is critical to our success. Our strong balance sheet and cash balance of $108.2 million give us the flexibility to invest in organic growth and modernization, maintain an appropriate cushion for industry variability, repurchase shares opportunistically and evaluate M&A opportunities that can provide scale and diversification.

With that, I'll turn the call over to Matt to walk through the financial details.

Mathew Pauli: Thanks, Jen, and good morning, everyone. Fourth quarter net sales were $151.8 million, essentially unchanged from the prior year period. This result was better than expected as we originally had estimated fourth quarter sales to be down 3% to 4% based on third-party estimates of OEM build rates at the time. Actual OEM production levels for the quarter came in down just 1.4%. Compared with the prior year period, we had $3.2 million lower sales from OEM canceled EV programs, which offset $1.4 million in pricing benefits and certain customer inventory builds. For the full year, net sales increased to $579.4 million from $565.1 million in the prior year, which represents a 2.5% increase.

Pricing contributed 2% with volume growth being less than 1%, consistent with the overall North American automotive market. Sales growth was stronger in the first half of the fiscal year as macroeconomic conditions, reduced OEM production builds and EV program shifts weighed on second half sales. Our customer and product mix remains diversified across leading OEMs, Tier 1 customers and commercial accounts as well as across our various product lines. Please turn to Slide 6. Fourth quarter gross profit was $23.6 million compared with $25.4 million in the prior year period, and gross margin was 15.6%. The fourth quarter comparison was affected by unfavorable foreign exchange rates and lower tooling gains.

On a constant currency basis, gross margin improved, reflecting lower tariff costs, pricing and restructuring savings, partially offset by higher cost of quality. For the full year, gross profit increased to $95.4 million from $84.6 million in fiscal 2025, and gross margin expanded 150 basis points to 16.5%. Importantly, this demonstrates the continued progress we are making in improving the underlying cost structure of the business even while managing external headwinds. Please turn to Slide 7. Selling, Administrative and Engineering expenses were $17.5 million in the fourth quarter or 11.5% of sales compared with $16.9 million or 11.1% of sales in the prior year quarter. The increase primarily reflected business transformation costs as well as higher salaries and benefits.

These expenses were partially offset by lower engineering and professional fees and restructuring savings. Higher business transformation costs in the quarter primarily related to the use of outside advisers to advance strategic initiatives, including the transformation of our Milwaukee operations and advancing our focus on M&A alternatives that could deliver shareholder value. For fiscal 2026, SAE expenses were $68.8 million or 11.9% of sales compared with $61.8 million or 10.9% of sales in fiscal 2025. The full year increase includes investments in salaries and benefits, business transformation, restructuring and executive transitions. It also reflects targeted investments in commercial, innovation, quality, procurement, supply chain, IT and program management capabilities. We remain focused on managing expenses with discipline.

Excluding unusual items, our longer-term objective is to operate SAE in a range of approximately 10% to 11% of revenue. In the near term, we will continue to make selective investments that support our transformation and position Strattec for future growth. Please turn to Slide 8. Net income attributable to Strattec in the fourth quarter was $3.9 million or $0.95 per diluted share compared with $8.3 million or $2.01 per diluted share in the prior year quarter. Fiscal 2026 fourth quarter GAAP earnings reflected incremental business transformation and executive transition costs as well as $2.9 million of discrete income tax adjustments associated with changes in tax regulations.

On an adjusted basis, fourth quarter net income attributable to Strattec was $8.4 million and adjusted diluted earnings per share was $2.06, unchanged from the prior year period. Adjusted EBITDA was $12.5 million compared with $13 million in the prior year quarter, with adjusted EBITDA margin affected principally by foreign exchange. For fiscal 2026, earnings per share grew 9% to $5, validating the impact of our transformation actions against the macro headwinds discussed today. We believe we have built a stronger business that can be more durable through the automotive cycles. Full year adjusted EBITDA increased to $50.5 million, up 15% from fiscal 2025, and adjusted EBITDA margin was 8.7%.

Our fiscal year financial performance, which includes a 100-basis-point improvement in adjusted EBITDA margins, illustrates an improved earnings base. Please turn to Slide 9. We continue to demonstrate our strong cash generation capabilities with $9.7 million in cash from operations during the fourth quarter and $46.3 million for the full year. As a reminder, fiscal 2025 cash flow benefited from a significant reduction in working capital and preproduction balances as we worked to release value that have been dormant on our balance sheet. Nevertheless, the company generated substantial cash in fiscal 2026 while continuing to invest in the business.

We also returned $7.4 million to shareholders through the repurchase of approximately 110,000 shares during the fourth quarter, which was about 2% of our outstanding shares. We accomplished that under a previous share repurchase authorization. As Jen mentioned, the Board approved a new authorization under which $40 million is available for future share repurchases. Our capital allocation priorities are straightforward. We will support organic growth and new customer programs, invest in automation and process modernization and preserve flexibility to manage cyclical industry conditions. Depending on the market, we will also repurchase shares opportunistically and evaluate M&A opportunities that can add scale and diversify our customer, product and program base. We will remain disciplined in how we evaluate and deploy capital.

Please turn to Slide 10. As we look ahead to fiscal 2027, we expect the automotive environment to remain challenging. Based on current third-party forecasts, we expect softer industry production in fiscal 2027, including an approximately 2% decline in North American production and a nearly 6% decline at our 3 largest customers. Our revenue will continue to be influenced principally by production levels at those customers, along with program mix, pricing and aftermarket demand. We also expect typical second quarter seasonality. We believe the actions that we have taken and transformation progress expected in fiscal '27 will help to offset our typical 30% decremental impact to gross profit on lower sales. However, we will face headwinds from foreign currency.

For example, had the peso been at its 5-year average or $19.50 to the U.S. dollar, our gross margin would have been about 100 basis points better in fiscal '26. The peso has already started the year at $16.90 compared with last year's average of $18. For perspective, based on our foreign currency exposure, a 5% change in the U.S. dollar relative to the Mexican peso could affect annual manufacturing costs by approximately $4 million before the impact of any hedging activity. Over the next few years, we continue to target gross margins of 18% to 20%, assuming the peso returns to its 5-year average.

We demonstrated the ability to generate gross margins at 16.5% this past year, and we believe our ongoing productivity, pricing and cost actions can support continued improvement. As I mentioned, we are targeting longer-term SAE to run at approximately 10% to 11% of revenue, excluding unusual items. In the near term, it will likely be slightly higher than our stated range as we continue to make investments that support the transformation amidst a weakening automotive market. Our effective tax rate for fiscal '27 is expected to be approximately 24% to 25%. We also expect a normalized operating cash flow run rate of approximately $10 million per quarter, subject to typical working capital variability.

We are planning about $12 million in capital expenditures for the year. With that, I'll turn the call back to Jen to close with Slide 11.

Jennifer Slater: Thanks, Matt. Let me review the progress we made in fiscal '26 with our transformation actions. We rebranded the company and created 3 focus pillars for our product lines: Permission, Motion and Hold. We injected new talent throughout the organization. We advanced engagement with current customers and began conversations with prospective customers as we work to institutionalize a future-looking pipeline development process. We captured $11 million in pricing. We moved the test lab from Milwaukee to our Auburn Hills location. We added 16 new automated assembly stations, which brings our total number of automated stations to 9%. This, of course, means we have a lot more opportunity in front of us.

We freed up 91,000 square feet or about 26% of production space in our Milwaukee facility. We rightsized our manufacturing operations by reducing headcount by an additional 7%. We automated our commercial pipeline management system, financial consolidation, employee benefits and expense reporting. We generated $46 million in cash from operations and ended the year with $108 million in cash. We returned $7.1 million of cash to our shareholders and paid down $8 million in debt. I want to thank all of our employees for their dedication and hard work. Without them, we would not have accomplished as much as we did.

We enter fiscal '27 with a stronger operating foundation and improved earnings base and a balance sheet that provides meaningful flexibility. We recognize that we have more work to do, particularly as we pursue future vehicle programs and navigate the challenging automotive environment. We will execute on the actions within our control, serving customers, improving operations, innovating new products, advancing future programs and allocating capital with discipline. With that, operator, we can open the call for questions.

Operator: [Operator Instructions] And our first question comes from the line of John Franzreb with Sidoti.

John Franzreb: Congratulations on a good quarter in a tough environment. I'd like to start with your outlook for the year. You talked about down 2% in production. I'm kind of curious about the timing, what you're hearing out there. Is that going to be a first half of fiscal year '27 event? Or is it more towards the second half of the year?

Mathew Pauli: Yes, John, this is Matt. I think the overall North American automotive production is down 2% or projected to be down 2% in fiscal '27. However, our top 3 customers, that being Ford, Stellantis and GM are projected to be down slightly more than that, around 6%. But when you think about it from a calendarization perspective, it's fairly consistent throughout our fiscal '27. Obviously, you've got some seasonality there in the second quarter just with the holiday shutdowns, but it's fairly consistent as we look forward to fiscal '27.

John Franzreb: Okay. Got you, Matt. And you mentioned about some of the cost savings that you realized in the past 2 years, I think, $9.5 and $6 last year, not compared total since '25 and $6 last year. Can you talk about what major program initiatives that still remains to be done? Or is the heavy lifting kind of already happened?

Jennifer Slater: Yes. Thanks for the question. I think what we touched on in some of the areas, we still feel there's still opportunity in the business. I talked about our automation being at 9% of our assembly stations. So I think the team has been making really good progress in how they're looking at that, but I think there's a lot of opportunity to continue there. As we continue to look at our supply chain processes, getting more stability across our supply chain is something that we haven't talked about, and it takes a little bit longer to start delivering, but there's continued opportunity there.

And then as we make improvements in those areas, continuing to look and make sure that we're constantly rightsizing our cost structure. Matt and I are really working on laying out what that is going to look at because I think as we've talked about in prior calls, a lot of our work has been about prioritization. There's been so much to do and getting the low-hanging fruit and the easiest to deliver first. And now it's about making sure we've got good plans for the rest of the opportunity and alignment with the organization on what those priorities are.

Mathew Pauli: I think the other thing to add, John, is we've been fairly measured in the actions that we've taken just to try and make sure that we've got good delivery with our customers. So we still think there's an opportunity. The team has done a nice job around kind of transportation costs, the automation that Jen mentioned, but there still is an opportunity to continue to improve our margins. We've said kind of longer term, we want to be in the 18% to 20%, and we see a path to get to there.

John Franzreb: Okay. And just one more quick question. Can you talk a little bit about the $1.4 million in cost of quality? I don't remember hearing that last quarter. What is that item?

Jennifer Slater: Yes. I think the first thing to make sure you understand is it's not the quality of our products. We make sure through our end-of-line process checks and everything else that we're delivering good quality products to our customers. And sometimes to do that, that we will find in our processes issues that we have in the supply base that then turn into expedited freight and other things to make sure we're getting good quality parts to our customers on time. We -- one of the things that we've been focusing on the last 2 years is understanding our supplier base and making sure we've got good suppliers who are aligned with their strategies and our strategies going forward.

And our purchasing director, who's relatively new to the organization has done a really nice job in balancing and working through some suppliers that have had exits for financial issues, some suppliers that haven't had the right quality for our expectations. And all of that gets put into that cost of quality bucket.

Operator: Our next question comes from the line of [ Ethan Star ], private investor.

Unknown Attendee: Nice year. So I'm wondering, are you seeing more opportunities to innovate and add content to vehicles in future model years that are still on the drawing board?

Jennifer Slater: [ Ethan ], thanks for the question. I talked a bit about what we have done with our branding of our products and focusing on our pillars with our Permission, Hold and Motion pillars. And the reason why we organized our pillars that way and aligned them to access is we feel with our existing products, we still have a lot of opportunity to work with our customers and get more content and proliferation on a larger set of platforms.

We're continuing to work on our innovation process around those products and working with our customers much more upfront than we have in the past to understand what problems they have and make sure that we're designing our product road maps to differentiate and provide value to our customers. So I think it's really a new approach here for the team that we've been focusing on. And I'm feeling really good about the progress the team has made that with those 3 pillars, we will be able to address a much larger set of customers. And then it's just about the time it takes to do that for the long-cycle business.

Unknown Attendee: Great. So are you making efforts to add new automaker customers in North America?

Jennifer Slater: Yes. Our commercial team has definitely -- we've brought in some new talent there that's leveraging some of the prior relationships that they've had with other automakers. Our focus really is first on automotive transportation. And then we think about extending it to a broader base of mobility where you've got off-road and ag customers and commercial truck. But we're starting in automotive and our customer team is making really good groundwork in developing some new relationships. And then I just always have to add the reminder of the time length that, that takes to turn into revenue because of the long-cycle nature of the business.

We're typically working 5-plus years out to when a start of production would happen and when we would realize that revenue.

Unknown Attendee: Okay. How much money do the automated manufacturing and assembly stations save? And what plans are there to add more such stations?

Jennifer Slater: So it's typically less than a year payback in how we're looking at it. What we're looking right now in our manufacturing is the simple automation where we can do more simple automation to replace a station at a line. As we're engaging with new customers and new products, we look at more transformational automation where we'll have fully automated lines. And I'll let Matt add on to that question a little bit.

Mathew Pauli: Yes. The CapEx has not been significant, [ Ethan ]. We -- our CapEx in total was only about $7 million for the fiscal year, and that included the automation that we wanted to do, which is primarily around assembly, as Jen mentioned, but we are rethinking other avenues for automation as well.

Unknown Attendee: Okay. Great. That's helpful. And last question, what, if anything, is happening with the potential sale of the Milwaukee facility?

Mathew Pauli: Yes. I think we've talked in the past, we had the building for sale, and we've decided that we are going to continue to manufacture here in Milwaukee at our current facility. But the facility is still too large for what we need for operations. And so we'll likely pursue a sale and a leaseback a portion of the building that we need to continue to operate here in Milwaukee.

Operator: [Operator Instructions] Our next questions are from the line of Kanagat Yertay with Freedom Broker.

Kanagat Yertay: Congratulations on a strong quarter. So my first question is going to be about outlook on the gross margin. So on the outlook slide, you say gross margin is challenged by FX and the volume in the next year. So should we be modeling margin down year-over-year? And if so, where does that leave the 18% to 20% target?

Mathew Pauli: Yes. So I think from a gross margin perspective, obviously, we've provided some comments on the revenue and the revenues being down on a year-over-year basis. Fundamentally, I think we've got a stronger business heading into '27 than we did in fiscal '25 or '26. So there will be pressure on the margins from the volume and the other portion there is FX. So FX is a headwind on a year-over-year basis from where the peso is today versus the average in fiscal '26 was about 18. But we've got the offsets to that.

We don't know that we'll offset all of it, but we'll offset a good portion of it based on some pricing actions not to the level that we saw this past year and also some continuous improvement actions that we have. So we've been very measured on the restructuring that we've done in the past. There still is opportunities to take further costs out of the business, and we'll work on those in fiscal '27.

Kanagat Yertay: Got it. And my next question is about CapEx. So CapEx was $7 million this year against $15 million of depreciation and the net PE came down. But Slide 4 is about upgraded equipment and assembly automation. So is the automation work generally that capital light? Or is there spend that's been deferred and that comes back in the next fiscal year?

Mathew Pauli: Our estimate for next year is still around $12 million, which is a little less than 2% of sales for CapEx.

Jennifer Slater: And I would say our business generally is more CapEx light even for some of the simple automation that we've been talking about.

Kanagat Yertay: Got it. And one more question. So Detroit 3 is about 2/3 of your revenue. So -- and over the next 3 or 4 years, roughly how much of that content comes up for resourcing as platforms reach end of life? And on the ones that have already been re-bid, have you retained the content?

Jennifer Slater: Yes. I talked a bit about all the work that we've been doing with our pipeline business. Matt and I have been clear that over the next 2 years, we are going to follow the automotive production. And then past that, we've been working to understand what -- with some of the opportunities that the team has worked on and as you pointed out, some platforms that are being renewed, some that are falling off, where do we feel confident our revenue will be longer term.

I don't think we're going to have a good level of confidence until the end of our fiscal year to give any longer-term guidance past what we have done as far as these fiscal year '27 and fiscal year '28 following typical North America production.

Operator: The next questions are from the line of John Franzreb with Sidoti.

John Franzreb: Yes. Just a question about the revenue outlook. You talked a little bit about canceled EV programs. Has that kind of all been flushed out? Or is that something we have to be cognizant about in the year ahead revenue profile?

Mathew Pauli: That's kind of all flushed out in our fiscal '26, John. It's about -- it was about a $10 million headwind from fiscal '25 to '26.

John Franzreb: Got it. And just one point of clarification. In the slide, you talked about cash flow. Is that an operating cash flow number? Or is that a free cash flow number?

Mathew Pauli: That's an operating cash flow number of about $10 million a quarter.

John Franzreb: Perfect. And the major automotive producers are now getting their tariff refunds. How does that flow down to you if it does at all?

Mathew Pauli: Yes. So we filed for certain tariff recoveries from IEEPA claims. But a lot of our agreements with our customers would require us to reimburse the customers to the extent they previously had compensated us for the tariffs. So it's not -- it's essentially neutral for Strattec.

John Franzreb: That's good to hear. And I guess I asked this question before. I'm going to ask it again or can you talk a little bit about maybe the willingness to reinstate the dividend? And also at this level, given your cash position and everything else, also maybe a stock split, I mean, increase the float there.

Mathew Pauli: Yes, John, I think we've talked about in the past, we're currently not contemplating a dividend, but I think we've laid out kind of our capital allocation priorities in the presentation material. So we want to continue to invest in the business, first and foremost. And then we've got other alternatives to drive shareholder value, which is really around exploring M&A, which will help us from a scale and a diversification perspective and also opportunistically buying back shares with the new authorization.

John Franzreb: Okay. And let's press that button. When you're talking about M&A, can you give us a sense of what kind of businesses you're targeting, maybe size and scale? I mean you have a clean balance sheet, so you can borrow rather significantly. Maybe give us some thoughts about the dynamics as far as M&A is concerned.

Jennifer Slater: Yes. What I would say to that, John, is the easiest thing for us, knowing we still have transformation here to do at this business is to stay in the industry that we're in. It's important that we're diversifying our customer base. So an opportunity that would help us diversify our customer base would be helpful to build those relationships faster than I said we can do organically. And then scale in this business is very important. If you look at our competitors, they have more scale, substantially more scale than we do. And so continuing to build scale faster than we can organically would be also important for M&A.

And then finally, as we've better defined what our product pillars are, something that fits in those product pillars so that we're not going too far out of our core is also important. And I think we talked about M&A before that we were in the early stages of developing a framework for our M&A, and we have worked with some third parties, and we're continuing to be active in that thinking. And because there's a lot of dynamics right now in the industry, and we want to be ready if something comes to us that we thought through what works for us and what doesn't work for us, to your point on what are we thinking about.

Operator: [Operator Instructions] Ladies and gentlemen, this will conclude today's question-and-answer session. We'll also conclude today's teleconference. Thank you for your participation, and have a wonderful day.