Logo of jester cap with thought bubble.

Image source: The Motley Fool.

DATE

Thursday, January 15, 2026 at 10 a.m. ET

CALL PARTICIPANTS

  • Chairman, President, and Chief Executive Officer — H.O. Woltz III
  • Senior Vice President, Chief Financial Officer, and Treasurer — Scot R. Jafroodi

Need a quote from a Motley Fool analyst? Email [email protected]

RISKS

  • Section 232 tariffs have induced US wire rod market tightness, raising raw material costs 50%-100% above global levels and creating uncertainty around input price stability.
  • Capacity curtailments resulted in domestic wire rod production falling by over 800,000 tons per year and capacity down nearly 1.2 million tons per year, representing about 25% of apparent domestic consumption offline.
  • Net working capital has risen by more than $50 million over the last twelve months, driven primarily by increased inventory levels due to reliance on offshore material amid insufficient domestic supply.
  • Management explicitly notes persistent upward pressure on labor costs, increased spending on energy, and Section 232 tariffs for both raw materials and parts, contributing to a continuing inflationary operating environment.

TAKEAWAYS

  • Net earnings -- $7.276 million, or $0.39 per share, compared to $1.1 million, or $0.06 per share, last year.
  • Restructuring and acquisition-related charges -- Last year's earnings included $1 million of such charges, reducing prior EPS by $0.04.
  • Shipment volume -- Increased 3.8% year over year, despite first quarter seasonality, but declined 9.7% sequentially from Q4 due to normal patterns.
  • Average selling price -- Rose 18.8% year over year, driven by pricing actions in response to higher wire rod costs and Section 232 tariffs; sequentially unchanged from Q4.
  • Gross profit -- $18.1 million versus $9.5 million last year; gross margin expanded to 11.3% from 7.3% year over year, reflecting a 400 basis point improvement.
  • Sequential gross profit and margin -- Declined by $10.5 million and 480 basis points from Q4 due to higher-cost inventory consumption.
  • SG&A expense -- Rose by $900,000 to $8.8 million (5.5% of net sales), mainly due to $800,000 higher compensation expense under the incentive plan; no first quarter incentive compensation last year.
  • Effective tax rate -- 21% versus 26.1% in the prior year, reflecting a reduced valuation allowance and a discrete state deferred tax item; guidance of approximately 23% for the remainder of the year.
  • Cash flow from operations -- Used $700,000, compared to providing $19 million last year, as working capital absorbed $16.6 million due to a $34.5 million inventory increase partially offset by a $14.1 million receivable reduction.
  • Ending cash and credit -- $15.6 million in cash and no borrowings on a $100 million revolver.
  • Inventory position -- 3.9 months of forward shipments, up from 3.5 months at Q4, driven by offshore material purchases and higher average carrying value.
  • Capital returned to shareholders -- $19.4 million via a $1 per share special cash dividend, and $745,000 in share repurchases (approx. 24,000 shares) during the quarter.
  • Capital expenditures -- $1.5 million spent, with continued commitment to a $20 million full-year target for plant and information systems investment.
  • Pricing outlook -- January price increases across most product lines expected to support spreads and margins in the second quarter as lower-cost inventories are consumed.
  • Acquisition impact -- Volumes reflect incremental contributions from fiscal 2025 acquisitions, now fully integrated into the base period.

SUMMARY

Management stated that order entry remains brisk in January, supporting an expectation that "2026 will be a strong year for the company." Recurrent project commitments in the data center construction sector extend through calendar 2026, providing a counterbalance to weaker traditional private nonresidential construction. Leadership specified that investments in engineered structural mesh and new manufacturing technology are expected to reduce cash production costs and enhance information systems. Managers noted that IIJA funding is viewed as a key driver behind increased demand, though the company cannot attribute specific projects to this source. Customer engagement suggests sustained volume strength, but management emphasized market unpredictability linked to economic cycles and trade policies.

  • Company affirmed the intention to maintain a mix of organic growth initiatives, capacity expansion, and opportunistic acquisitions, independently of broader economic or policy risks.
  • H.O. Woltz III indicated that data center demand is "new to Insteel Industries (IIIN 7.12%)," but the company is experiencing repeat opportunities and strong customer traction.
  • The $20 million capital expenditure budget is approximately split between maintenance and growth/productivity investments, with a focus on labor reduction and modernization.
  • Management expects the inventory build to moderate going into the second quarter, but highlighted that future reliance on offshore supply will persist unless US wire rod availability materially improves.

INDUSTRY GLOSSARY

  • PC strand: A seven-wire strand used to impart compression in precast concrete, reinforcing bridges, decks, and similar structures.
  • WWR: Welded Wire Reinforcement, a steel mesh product engineered for concrete reinforcement in various construction applications.
  • Section 232 tariff: A US government-imposed duty, currently 50% on certain steel imports, aimed at protecting domestic industry but raising input costs.
  • Architectural Billing Index (ABI): An industry index where readings below 50 indicate contraction in nonresidential design activity.
  • Dodge Momentum Index (DMI): A leading indicator of nonresidential construction activity, tracking commercial and institutional project planning.
  • IIJA: Infrastructure Investment and Jobs Act, a federal program providing funding for US infrastructure projects, affecting end-market demand.
  • Engineered Structural Mesh (ESM): Custom-designed steel reinforcing mesh offering performance and productivity advantages over traditional rebar in concrete construction.

Full Conference Call Transcript

The upturn in business activity we reported previously continued during our first quarter, and our fiscal 2025 acquisitions continue to perform well. While our ability to forecast future activity is limited, we are encouraged by the level of optimism in our markets as well as brisk order entry up to this point in January, which causes us to believe that 2026 will be a strong year for the company. While the relative strength of our markets is real, we are aware of uncertainties created by the administration's trade policies, the nation's fiscal conditions, and by the economic cycle. I am going to turn the call over to Scot R. Jafroodi to comment on our financial results.

Following Scot's comments, I will pick the call back up to discuss our business outlook.

Scot R. Jafroodi: Thank you, H.O. Woltz III, and good morning to everyone joining us today. As highlighted in this morning's press release, we delivered a strong start to the year. First quarter results benefited from improved demand for our concrete reinforcing products, which supported wider spreads between selling prices and raw material costs. Net earnings for the quarter rose to $7.276 million or 39¢ per share compared with $1.1 million or 6¢ per share in the same period last year. It is also worth noting that last year's first quarter results included $1 million of restructuring charges and acquisition-related costs, which collectively reduced earnings per share by 4¢.

First quarter shipments, which are typically our softest period due to winter weather conditions and holiday schedules, increased 3.8% year-over-year. On a sequential basis, shipments declined 9.7% from the fourth quarter, which is consistent with normal seasonal patterns. The year-over-year growth in shipments reflects improved demand across our commercial and infrastructure markets along with incremental volume from the acquisitions we completed early last year. As we move forward, our year-over-year volume comparisons will normalize now that these acquisitions are fully integrated into our run rate.

Turning to pricing, average selling prices increased 18.8% year-over-year, reflecting the pricing actions we took throughout fiscal 2025 to offset higher steel wire rod costs driven by tight domestic supply conditions and increased Section 232 steel tariffs, as well as to address rising raw operating costs. Sequentially, average selling prices were essentially unchanged from the fourth quarter as we did not take additional pricing actions during the current period. However, with scrap and wire rod prices now moving higher again, we implemented our old price increases across most product lines, which took effect earlier this month.

Gross profit for the quarter improved to $18.1 million from $9.5 million a year ago, with gross margin expanding 400 basis points to 11.3% from 7.3%. This improvement was driven by widening spreads, higher shipment volumes, and lower unit manufacturing costs. On a sequential basis, gross profit declined by $10.5 million from the fourth quarter, and gross margin narrowed by 480 basis points, driven primarily by the consumption of higher-cost inventory. As I just mentioned, the price increases implemented in January are expected to benefit second-quarter spreads and margins as higher selling prices begin to align with the consumption of lower-cost inventories under the first-in, first-out accounting methodology.

SG&A expenses for the quarter rose by approximately $900,000 to $8.8 million or 5.5% of net sales compared with $7.9 million or 6.1% of net sales in the prior year. The year-over-year increase was driven primarily by an $800,000 rise in compensation expense under our return on capital-based incentive plan, reflecting stronger financial performance in the current year. As you may recall, we did not incur any incentive compensation expense in the first quarter of last year. Our effective tax rate decreased to 21% compared to 26.1% in the prior year period.

The decline was primarily driven by a reduction in the valuation allowance on deferred tax assets along with a discrete tax item related to the calculation of state deferred taxes. Looking ahead, we expect our effective tax rate for the remainder of the year to be approximately 23%, subject to the level of pretax earnings, post-tax book-to-tax differences, and the other assumptions and estimates underlying our tax provision calculation.

Moving to the cash flow statement and the balance sheet, cash flow from operations used $700,000 in the quarter, compared to providing $19 million last year. Net working capital used $16.6 million of cash in the first quarter, driven primarily by a $34.5 million increase in inventories, partially offset by a $14.1 million reduction in accounts receivable. The inventory increase reflects higher raw material purchases, including a meaningful amount of offshore material, along with an increase in the average carrying value of inventory. On the receivable side, the decline was largely tied to lower shipments, which is consistent with the normal seasonal slowdown in sales we see this time of year.

Reported on the inventory position represented approximately 3.9 months of shipments on a forward-looking basis, calculated off of our forecasted second-quarter volumes, compared with 3.5 months at the end of the fourth quarter. As we discussed on our prior call, we expected a temporary inventory build in the first quarter as we supplemented domestic wire rod supply with offshore purchases. Looking ahead, we expect inventory levels to moderate over the course of the second quarter as purchasing activity normalizes and shipment volumes increase. It is also worth noting that our first-quarter inventories are carried at an average unit cost that is generally in line with our first-quarter cost of sales and remain below current replacement levels.

We incurred $1.5 million of capital expenditures in the first quarter and remain committed to a full-year target of $20 million. H.O. Woltz III will provide more detail on this topic in his remarks. In December, we returned $19.4 million of capital to our shareholders through the payment of a $1 per share special cash dividend in addition to our regular quarterly dividend. This marks the ninth time in the last ten years that we have issued a special dividend. Also, during the first quarter, we continued our share buyback, repurchasing $745,000 of common equity equal to approximately 24,000 shares.

From a liquidity perspective, we ended the quarter with $15.6 million in cash on hand and no borrowings outstanding on our $100 million revolving credit facility. Turning to the macro indicators for our construction end markets, the latest readings from two key leading measures, the Architectural Billing Index (ABI) and Dodge Momentum Index (DMI), continue to signal a mixed and somewhat cautious outlook for nonresidential commercial construction activity. In November, the ABI registered 45.3, remaining firmly in negative territory as any reading below 50 can indicate a contraction in activity. This marks the thirteenth consecutive month of declining billings. Inquiries for new projects showed only modest improvement, and the value of newly signed design contracts continued to soften.

In contrast, the Dodge Momentum Index signaled strengthening activity, rising 7% in December and supported by more than 3.5% growth in commercial planning, driven in large part by data center construction. Year-over-year, the DMI was up over 50% overall, including a 45% increase in the commercial segment. Turning to the broader market backdrop, the most recent construction spending data from the US Department of Commerce shows that through August, total construction spending on a seasonally adjusted basis was down about 1.6% year-over-year. Nonresidential spending declined 1.5%, and public highway and street construction, one of our key end markets, was down about 1% compared to the same period last year.

Finally, US cement shipments, another key measure that we monitor, fell 4.3% in August and were down 3.4% year-to-date. That said, as we close out 2026, we are encouraged by the steady demand we are seeing across our core markets. While we recognize the broader economic backdrop remains uncertain, the demand trends we are seeing and the conversations we are having with customers give us confidence as we look ahead to the balance of the year. This concludes my prepared remarks. I will now turn the call back over to H.O. Woltz III.

H.O. Woltz III: As I noted in my opening comments, we are pleased with the acceleration of business activity that continued through our first quarter. Our first quarter performance will never be strong due to the limited number of working days in the quarter after giving effect to Thanksgiving and Christmas shutdowns through much of the industry and to seasonal weather patterns. So our first quarter results are never indicative of the level of demand for our products. Nevertheless, we are pleased with the performance for the quarter and see no indication that the level of activity in our markets is poised to subside.

As we consider the drivers of demand for our products, the facts are no clearer to us today than they have been in the past. We believe, however, that funding from the Infrastructure Investment and Jobs Act (IIJA) is responsible for much of the uptick in demand we have experienced, although we cannot definitively state that any single project was funded by IIJA. I suspect the same is true for our customers. They have enjoyed better volume levels without knowing the precise source of funding that drives demand for their products. While IIJA funding expires in 2026, funded projects will proceed into 2027 and beyond. The consensus today is that there is bipartisan support for a replacement infrastructure funding mechanism.

Of course, that remains to be seen. The other notable source of demand that we expect to remain robust into 2027 is from the data center construction boom that has been well publicized. While community pushback seems to be growing as the scale of data center resource intensity is more fully appreciated, we have commitments from customers for projects that have been approved and funded and that should run through calendar 2026.

The timing of the data center activity is fortuitous since other sectors of the private nonresidential construction market are weak. We believe the data center work will serve as a timely bridge while we wait for the recovery of more traditional private nonresidential projects. Turning to another subject, the steel industry may have been more affected by the administration's tariff policy than any other industry. The Section 232 tariff of 50% on imports of steel has caused market prices in the US for hot rolled wire rod, our primary raw material, to rise to a level that is 50% to 100% higher than the global market price.

While we are fortunate that imports of PC strand are now subject to the Section 232 tariff under the derivative products provision, domestic wire rod prices have risen to an extent that dilutes the benefit of the Section 232 tariff on PC strand. Probably of more importance is the uncertainty that continues to surround the administration's tariff policy. Recently, I read that the Secretary of Commerce had speculated that the Section 232 tariff might be modified or removed with respect to the Europeans if the right trade deal were struck between the US and European Union. It is reasonable to assume that this could be true with respect to other countries as well. Notably, negotiations surrounding USMCA come to mind.

Such speculation by the administration increases uncertainty and instability in US markets. It is important for investors to understand that Insteel Industries, Inc. operates in a small segment of the domestic hot rolled carbon steel market. Domestic production of wire rod, our primary raw material, is approximately 3.5 million tons per year, while US production of all hot rolled carbon steel is roughly 100 million tons per year. Difficult economic conditions in recent years for producers of wire rod resulted in the permanent closure of two producing mills and financial struggles together with significantly diminished output for a third producer.

Altogether, these curtailments reduced actual domestic production of wire rod by more than 800,000 tons per year and reduced domestic capacity to produce wire rod by nearly 1.2 million tons per year relative to apparent domestic consumption of approximately 5 million tons per year. So by our calculation, capacity equal to nearly 25% of apparent domestic consumption is offline, most of it permanently. These capacity curtailments together with the imposition of the Section 232 tariff caused the US wire rod market to tighten significantly and created serious questions about the adequacy of domestic supply. Insteel Industries, Inc. therefore turned to the offshore market for a portion of its supply.

The economics of offshore transactions, which include substantial freight costs, require the purchase of large quantities with a resulting impact on inventories and networking capital requirements as reflected on our balance sheet. Net working capital has risen over $50 million in the last twelve months. We expect to continue importing a portion of our raw material requirement until such time as domestic availability improves. We believe, however, that the net working capital impact of importing will be more muted going forward and that we will see significant working capital release as market conditions normalize. But it is not possible to quantify this at the present time.

Finally, turning to CapEx, as mentioned in the release and by Scot R. Jafroodi, we expect to invest approximately $20 million in our plants and information systems infrastructure here in 2026. We expect our investments to support the growth of our engineered structural mesh business, to reduce our cash production costs, and to enhance the robust nature of our information system. Consistent with past practice, we will provide quarterly updates of our investment activities and expectations as the year progresses. We believe our estimate is conservative in keeping with prior forecasts for CapEx levels. Looking ahead, we are aware of substantial risks related to the state of the economy and the administration's tariff policies.

Regardless of developments in these areas, we are well-positioned to pursue growth-related activities, both organic and through acquisitions, to optimize our costs. This concludes our prepared remarks, and we will now take your questions. Breeka, would you please explain the procedure for asking questions?

Operator: Of course. If you wish to ask a question, please press star followed by one on your telephone keypad now. Please press star followed by two. And when preparing to ask your question, ensure your device is unmuted locally. We have our first question from Julio Alberto Romero from Sidoti and Company. Your line is now open. Please go ahead.

Julio Alberto Romero: Thanks. Hey, good morning, H.O. Woltz III and Scot R. Jafroodi. To begin, you sounded pretty constructive on the overall demand outlook, particularly with the data center and IIJA-related projects. You mentioned the commitments you have from customers on the data center side that have been approved and funded and run through calendar 2026. Can you give us a little bit more color on these commitments? Are these new commitments in your pipeline? Have they been accelerating? And what is your sense of how far out these commitments are beyond calendar 2026?

H.O. Woltz III: Well, I mean, the data center business is new to Insteel Industries, Inc. It is new to much of the economy. I think 2025 was the first year we had done any significant data center business, but certainly, now that we are in that market and connected with some of the companies that regularly do that business, we are seeing repeat opportunities and robust demand, which comes as no surprise based on what has been publicized about that industry and that build-out.

Julio Alberto Romero: Got it. That is helpful. And, talking about the volumes in the quarter, you experienced growth of roughly 4%. Can you talk about how that was affected, if at all, by constraints of wire rod? Both in this quarter and on a go-forward basis?

H.O. Woltz III: Do you mean just the domestic situation?

Julio Alberto Romero: Yeah. I think the last couple of quarters you called out that raw material constraints have kind of constrained your volume output. But it sounds like that was less of an effect this quarter.

H.O. Woltz III: So the reason that I went through the mill closures and sort of the macro with respect to wire rod supply and demand is to give readers of our release and participants on this call a sense for why our inventories have grown. Our inventories have grown because we are unable to acquire sufficient quantities of wire rod domestically, and we are forced to go offshore. I will point out that the situation in the wire rod market is very different than the situation that confronts purchasers of other hot rolled steel products because wire rod capacity has contracted significantly, and capacity has expanded significantly in other hot rolled products.

So when we concluded that it was unlikely we could support our business objectives by buying solely domestically, we went to the offshore market to fill the gaps. We will continue doing so until such time as we see that availability improves in the US and that suppliers are willing to work for an order.

Julio Alberto Romero: Very helpful context there. Last one, if I may, and I will pass it on, is on the SG&A front. You were able to grow sales 23% while SG&A grew by 11%. My question is, are you beginning to realize SG&A leverage from your acquisitions of EWP and OWP at this point in time? Or is that leverage still coming in your view?

H.O. Woltz III: Well, I mean, we certainly realize the synergies we expected to come from the acquisition. I would say that together with the added shipments and sales volume is really what that acquisition was all about. We are pleased with its performance, and we are moving along well.

Julio Alberto Romero: Excellent. I will pass it on. Thanks very much.

Scot R. Jafroodi: Thank you.

Operator: Our next question is from Tyson Lee Bauer from KC Capital. Your line is now open. Please go ahead.

Tyson Lee Bauer: Good morning, gentlemen. Insteel Industries, Inc. has consistently been able to run counter to the industry stats as far as your ability to grow shipments and your ability to grow as a company. Versus, I think you mentioned, thirteen straight months of ABI billings below 50 and some of the other general industry stats. What has allowed you to run counter to those? Are we seeing an underlying acceleration away from just standard rebar to more of your ESM products and other products that would account for your ability to grow facing those kinds of industry headwinds?

H.O. Woltz III: Well, if I remember correctly, Tyson, the first time that business conditions for Insteel Industries, Inc. seemed to diverge significantly from what the major macro indices would indicate was 2025. Several things have happened internally that have helped us with that. Our work in the cash-in-place market has helped. Our acquisitions have helped. I think there are things going on internally that are different than what you may see in macro indicators for construction activity in the US market. We will continue pursuing the paths that we are pursuing now.

Tyson Lee Bauer: In the past, you benefited from when we were going into 2021 with the distribution centers. Now we are looking at data centers, both DC, ironically. You are working with those contractors that specialize there. Are you being spec'd into those designs as you were with some of the online retail customers before in the DCs? As we see that develop and that industry grow, are you kind of in lockstep with that?

H.O. Woltz III: Yeah. I think every project is different. But as a general goal, I would say no. We are not spec'd in. Rebar is spec'd in. We make a conversion of rebar applications to engineered structural mesh applications and rely on the value proposition of our product. Particularly with respect to data centers, one of the significant value propositions that we offer is speed. These owners and lessors of these centers are really focused on constructing them and getting them up and operating quickly. Our product helps with that whole charge.

Tyson Lee Bauer: So you do have an inherent advantage based on what your product is to grow along with that growing segment, that niche.

H.O. Woltz III: Yeah. I think the value proposition of our product relative to rebar is solid. There is no question about that.

Tyson Lee Bauer: Okay. Inventory levels, it sounds like that may have peaked this past quarter. Will we see a gradual downtick? Will that downtick accelerate as we get into fiscal three and fiscal four?

H.O. Woltz III: Well, I think it depends on the level of shipments that we see. If the scenario that we believe will unfold actually unfolds, and that is one of strong business conditions in 2026, then I think that is correct. But keep in mind that we will go back to the offshore market for Q3 and Q4 if we do not see significant improvements in the balance of supply and demand domestically.

Tyson Lee Bauer: Okay. The CapEx of $20 million, is that roughly split fifty-fifty maintenance, $10 million, $10 million for whether it be cost reductions or product line expansions, more of the growth side or improvement in margin? Is that kind of the split you are looking at?

H.O. Woltz III: I would say that is close to correct. We are still identifying some of the capacity expansion opportunities that exist out there. Of course, we are always interested in incorporating new technology into our manufacturing operations that will help us reduce cash costs of operation. We still have the underlying labor availability issue. As you might suspect, the more new technology we bring into the plants, the less labor-intensive our operation is. We are very much oriented toward looking at that.

Tyson Lee Bauer: Okay. And last one for me. As the administration goes to Davos, it is supposed to lay a plan to increase and incentivize greater activity in the residential side, which is about 15% of your overall business. Betting against the administration has proved futile. So you kind of go with what they are pushing, especially in an election year. How quickly can that residential market for you turn where it becomes a benefit as opposed to just kind of being stuck in the mud the last couple of years?

H.O. Woltz III: My view would be probably not fast enough to have any meaningful impact on 2026 for Insteel Industries, Inc. More importantly, our participation in residential markets would be related to slab-on-grade construction of housing units where the slabs are post-tensioned, and we are using PC strand. That is the segment of business where we knock heads with the imports most closely.

Tyson Lee Bauer: Okay. I am going to sneak one in. The labor cost outlook, we have heard other companies talk about general wage increases, health costs on that side of it. Have you indexed or looked at labor costs in increases for this year and what kind of offsets you have there?

H.O. Woltz III: Yeah. We have 11 or 12 different considerations because we look at prevailing labor markets in each of the areas where we operate. They are each different. But the upward pressure on labor costs still exists. We are incurring significant reciprocal and Section 232 tariff expenses in purchases of non-raw material items like spare parts, seeing energy increase. The inflationary environment is alive and well within our operations, and it really, like I say, every one's an independent event.

Tyson Lee Bauer: Okay. Thank you, gentlemen.

Operator: Thank you. We currently have no further questions, so I will hand back over to the management team for closing remarks.

H.O. Woltz III: Okay. We appreciate your interest in Insteel Industries, Inc. and its operating results, and we look forward to talking to you next quarter. In the meantime, if you have questions, do not hesitate to follow up with us. Thank you.

Operator: This concludes today's call. Thank you for joining. You may now disconnect your lines.