Image source: The Motley Fool.

DATE

Aug. 5, 2025 at 11 a.m. ET

CALL PARTICIPANTS

  • Chief Executive Officer — Nathan R. Jorgensen
  • Chief Financial Officer — Kelly E. Hibbs
  • Executive Vice President, Wood Products — Troy Little
  • Executive Vice President, Building Materials Distribution — Joanna Barney

TAKEAWAYS

  • Revenue -- $1.7 billion, down three percent due to constrained demand from affordability challenges and elevated home inventory.
  • Net Income -- $62 million, decreasing from $112.3 million, with earnings per share at $1.64 versus $2.84.
  • Wood Products Sales -- $447.2 million, down nine percent due to lower engineered wood product (EWP) and plywood prices, reduced plywood volumes, and negative inventory adjustments.
  • Wood Products EBITDA -- $37.3 million, dropping from $95.1 million, impacted by lower selling prices and planned outages, partially offset by a $3.9 million property gain.
  • Building Materials Distribution (BMD) Sales -- $1.6 billion, decreasing two percent, with flat volumes and a two percent decline in average prices.
  • BMD EBITDA -- $91.8 million, down from $97.1 million, attributed primarily to $12.1 million higher selling and distribution expenses, offset by a $3.8 million property gain.
  • BMD Gross Margin -- 15.4%, up 60 basis points year over year, driven by higher margins in general line products, despite weaker commodity and EWP margins.
  • BMD EBITDA Margin -- 5.7%, declining from 5.9% but increasing from 4.5% sequentially.
  • LVL Volumes -- Up eight percent year over year and 18% sequentially; I-joists volumes down five percent year over year but up 14% sequentially.
  • Average Plywood Net Sales Price -- $342 per thousand, down six percent year over year and flat sequentially; volume at 356 million feet compared to 383 million feet previously.
  • BMD Product Line Sales -- Commodity sales down five percent, general line up four percent, EWP sales down 12%, with totals not summing to segment sales due to offsetting line items.
  • Capital Expenditures -- $132 million year to date, part of $220 million-$240 million full-year plan, with major Oakdale mill modernization substantially complete.
  • Shareholder Returns -- $18 million paid in regular dividends in the first half of 2025; quarterly dividend increased by $0.01 to $0.22 per share, a five percent rise.
  • Share Repurchases -- $96 million repurchased year to date, including $32 million in the second quarter and $10 million in July, leaving approximately 850,000 shares available.
  • Third Quarter Guidance (Wood Products) -- EBITDA expected to be $20 million-$30 million; EWP volume to decline high single digits sequentially; EWP pricing to fall low- to mid-single digits sequentially; plywood pricing realized in July at approximately five percent below second quarter average.
  • Third Quarter Guidance (BMD) -- EBITDA estimated at $70 million-$80 million; July daily sales pace three percent lower than second quarter average of $25.2 million per day.
  • Operational Efficiency -- Oakdale modernization and greenfield expansion in Hondo, Texas positioned to enhance distribution and manufacturing strength; [Thorsby] line expected operational in the first half of 2026.
  • Union Activity -- Strike at Billings, Montana facility limited to 19 employees and one location; company expects "no material impact" due to business continuity protocols.
  • Macroeconomic Context -- U.S. housing starts decreased one percent; single-family starts fell eight percent; management notes demand constraints from affordability, elevated home inventory, and consumer uncertainty.

Need a quote from a Motley Fool analyst? Email [email protected]

RISKS

  • BMD sales exposed to "potential for meaningful forward pricing volatility for plywood, lumber and other commodity products" due to "uncertainties from trade and tariff policy changes."
  • Anticipated continuation of "headwinds for residential construction activity" and persistent "limited near-term clarity for end-market demand," per management's guidance.
  • Management states, "competitive pressures drove sequential declines for LVL and I-joists of three percent and two percent, respectively," indicating ongoing margin pressure in engineered wood products.
  • Repair and remodeling activity is "held back by diminished levels of existing home turnover and from homeowners delaying large repair, remodel projects due to the high cost of accessing their equity combined with economic uncertainty."

SUMMARY

Boise Cascade (BCC 4.86%) reported a significant decline in net income and continued margin pressure in key business segments, reflecting cooling demand and adverse pricing trends. Management confirmed that the Oakdale mill modernization reached substantial completion and that the [Thorsby] line will be operational in the first half of 2026, directly supporting ongoing strategic capital investments. The company executed $96 million of share repurchases through July and approved a higher dividend payout, reinforcing its capital return focus despite challenging industry headwinds. Forward guidance outlines sequential declines in volumes and pricing for engineered wood products, with BMD segment margins subject to unpredictable market and policy volatility.

  • Management outlined a capital expenditure range for 2025 of $220 million-$240 million, with Wood Products investments targeting operational flexibility and distribution asset growth.
  • The company highlighted "seasonally stronger activity" as a temporary driver for sequential sales growth in the quarter, signaling that end-market demand remained fundamentally muted.
  • Improvements in BMD gross margin stemmed from a larger share in general line products, which partially offset commodity product margin declines.
  • Operational continuity was maintained during the strike at the Billings location, and management expressed confidence that no notable supply disruption would arise.
  • Management credits "Cross-divisional efficiencies," and the integrated business model for providing inventory visibility and supply-chain adaptation during periods of demand uncertainty.

INDUSTRY GLOSSARY

  • EWP (Engineered Wood Products): Manufactured structural wood materials such as laminated veneer lumber (LVL) and I-joists, used primarily in load-bearing applications within residential and commercial construction.
  • LVL (Laminated Veneer Lumber): An engineered wood product made from thin wood veneers bonded together, used in beams, headers, and other structural applications.
  • BMD (Building Materials Distribution): The company's segment that distributes a broad range of building materials, including boards, plywood, engineered wood, and other specialty construction products.
  • General Line Products: Non-commodity building materials distributed by BMD, such as siding, doors, roofing, and insulation, typically featuring higher margins and lower price volatility than commodity wood products.

Full Conference Call Transcript

Nathan R. Jorgensen: Thanks, Chris. Good morning, everyone. Thank you for joining us on our earnings call today. I'm on Slide #3. Total U.S. housing starts and single-family housing starts decreased 1% and 8%, respectively, compared to the prior-year quarter. Our consolidated second quarter sales of $1.7 billion were down 3% from second quarter of 2024. Our net income was $62 million or $1.64 per share compared to net income of $112.3 million or $2.84 per share in the year-ago quarter. Included in our second quarter results are $7.7 million of pretax gain on asset sales, where I'm happy to report we monetized nonoperating properties in both Wood Products and BMD. We experienced sequential volume growth driven by seasonally stronger activity.

However, underlying demand continued to be constrained due to affordability challenges, elevated existing home inventory and consumer uncertainty. I'm pleased to share that the modernization project at our Oakdale mill is substantially complete, which represents a significant milestone for our Southeast manufacturing system. I want to thank our associates across our organization who made this project successful. We will benefit from enhanced operational efficiency and reliability while advancing our distinct competitive advantage to drive incremental value creation through our self- sufficient veneer production. As we navigate a dynamic marketplace, our actions will address near-term challenges without sacrificing the service standards that our customer and supplier partners have come to expect from us.

At the same time, we are well positioned to continue to invest in opportunities that drive enduring, sustainable growth in the years ahead, supported by the strong structural demand drivers we see in residential construction over the long term. Kelly will now walk through our segment financial results, capital allocation priorities and guidance on our third quarter results, after which I'll make closing comments before we take your questions. Kelly?

Kelly E. Hibbs: Thank you, Nate, and good morning, everyone. Wood product sales in the second quarter, including sales to our distribution segment, were $447.2 million, down 9% compared to second quarter 2024. The Wood Products segment EBITDA was $37.3 million compared to EBITDA of $95.1 million reported in the year-ago quarter. The decrease in segment EBITDA was due primarily to lower EWP and plywood sales prices as well as lower plywood volumes and an unfavorable profit and inventory adjustments. In addition, the scheduled Oakdale outage negatively impacted year-over-year EBITDA comparisons. These decreases in segment EBITDA were offset partially by a $3.9 million gain on the sale of a nonoperating property.

In BMD, our sales in the quarter were $1.6 billion, down 2% from second quarter 2024. BMD reported segment EBITDA of $91.8 million in the second quarter compared to segment EBITDA of $97.1 million in the prior-year quarter. The decrease in segment EBITDA was driven primarily by increased selling and distribution expenses of $12.1 million. However, BMD's gross margin dollars increased $3.4 million from second quarter 2024. And our gross margin was 15.4%, a 60 basis point year-over-year improvement.

In an environment where demand was stagnant and many product prices were declining, we are pleased with our gross margin performance, a reflection of very good execution by our team and our focus to increase the portion of our sales in best-in-class general line products. In addition, segment income benefited from a $3.8 million gain on the sale of a nonoperating property. Turning to Slide 5. We Year-over-year and sequentially, second quarter LVL volumes were up 8% and 18%, respectively, while I- joists volumes for the same comparative periods were down 5% and up 14%.

As referenced earlier, Wood Products second quarter income included an adjustment to reverse profits associated with inventory sold through our distribution segment that is yet to be sold into the marketplace. This adjustment resulted in an unfavorable sequential variance of approximately $6 million. As it relates to pricing, competitive pressures drove sequential declines for LVL and I-joists of 3% and 2%, respectively. Turning to Slide 6. Our second quarter plywood sales volume was 356 million feet compared to 383 million feet in second quarter 2024. The decrease was primarily driven by the planned outage at our Oakdale mill as well as downtime at our Kettle Falls mill to complete a scheduled maintenance project.

The 342 per thousand average plywood net sales price in the second quarter was down 6% on a year-over-year basis and flat compared to first quarter 2025. Moving to Slide 7 and 8, BMD's year-over-year second quarter sales decline of 2% was driven by a 2% decrease in prices as sales volumes were flat. By product line, commodity sales decreased 5%, general line product sales increased 4% and sales of EWP decreased 12%. However, our sequential sales results reflected seasonally stronger activity, with our sales increasing 15% from first quarter. As I mentioned earlier, BMD's second quarter gross margin percentage was 15.4%, up 60 basis points year-over-year.

In particular, gross margin dollars were affected by increased margins on general line products, offset by -- partially by decreased margins on commodity and EWP products. BMD's EBITDA margin was 5.7% for the quarter, down from the 5.9% reported in the year-ago quarter, but up from the 4.5% reported in the first quarter. After market conditions led to a slow start to the year, increased sales activity in the second quarter and good execution by the BMD team allowed our EBITDA margins to rebound nicely. I'm now on Slide 9. We had capital expenditures of $132 million in the 6 months ended June 2025, with $70 million of spending in Wood Products and $62 million of spending in BMD.

We remain committed to the capital plan presented earlier in the year with our capital spending range for 2025 unchanged at $220 million to $240 million. In Wood Products, that range includes the multiyear investments in support of our EWP production capabilities in the Southeast. As Nate mentioned earlier, the Oakdale modernization is substantially complete and startup and optimization activities are going well. [ Thorsby ] line is expected to be operational in the first half of 2026. In BMD, part of our capital deployment strategy is to solidify and expand our market-leading national distribution presence. In the second quarter, we completed 2 lease buyouts of our highly successful distribution centers in Chicago and Minneapolis.

In addition, construction on our greenfield distribution center in Hondo, Texas is nearly complete, and we expect to begin servicing the San Antonio market from there by the end of the third quarter. Speaking to shareholder returns, we paid $18 million in regular dividends in the first half of 2025. Our Board of Directors also recently approved a $0.22 per share quarterly dividend on our common stock, which represents a $0.01 per share or approximately 5% increase that will be paid in mid-September. Through the first 7 months of 2025, we repurchased approximately $96 million of Boise Cascade common stock, which includes approximately $32 million in the second quarter and another $10 million in July.

Today, we have about 850,000 shares available for repurchase under our current share repurchase program. In summary, our balance sheet remains strong, and we continue to be dedicated to a balanced deployment of capital by investing in our existing asset base, pursuing value-enhancing organic and M&A growth opportunities that position the company for sustainable long-term growth and returning capital to our shareholders. We're fortunate that our solid financial foundation and resilient free cash flow allow us to simultaneously advance each of these objectives. I'm now on Slide 10. Looking forward to the third quarter, we expect headwinds for residential construction activity will persist.

With that in mind and recognizing that even near-term forecasts are difficult to make, given the current market dynamics, we have presented a range of potential EBITDA outcomes and related key drivers. For Wood Products, we currently estimate third quarter EBITDA to be between $20 million and $30 million. We expect our EWP volumes to decline high single digits sequentially as homebuilders moderate their starts pace to align with new home sales and our channel partners reduced inventory levels. On EWP pricing, low to mid-single-digit sequential declines are expected as competition per share persists.

In plywood, we expect mid-single-digit sequential volume increases resulting from the resumption of operations at our Oakdale mill and the avoidance of planned maintenance downtime that we experienced in the second quarter at our Kettle Falls operation. On plywood pricing, July realizations were approximately 5% below our second quarter average. Partially offsetting changes in Wood Products top line are somewhat lower expected manufacturing and web stock costs due to improved operating rates at Oakdale and Kettle Falls and weakness in OSB pricing. For BMD, we currently estimate third quarter EBITDA to be between $70 million and $80 million, BMD's daily sales pace in July was approximately 3% below the second quarter sales pace of $25.2 million per day.

Our daily sales pace for the balance of the third quarter will be dependent upon end-market demand, product pricing and our customer partners reliance upon us for next day out-of- warehouse service. Lastly, in addition to limited near-term clarity for end-market demand are uncertainties from trade and tariff policy changes that create the potential for meaningful forward pricing volatility for plywood, lumber and other commodity products. I'll now turn it back over to Nate to share our business outlook and closing remarks.

Nathan R. Jorgensen: Thanks, Kelly. I'm on Slide #11. No matter the operating conditions, our experienced team remains committed to creating value for our shareholders as well as our customers and suppliers by staying resilient, adaptable and focused on delivering exceptional products and services. Due to our integrated model, we're able to take advantage of increased channel inventory visibility, allowing us to better navigate market uncertainty by aligning production rates and inventory strategies with end-market demand. Cross-divisional efficiencies, combined with our robust balance sheet, provide us the ability to stay focused on the execution of our strategy and creation of long-term value for our stakeholders.

We remain confident that long-term demand drivers for residential construction, such as the undersupply of housing units, the age of U.S. housing stock and the high levels of homeowner equity; remain robust. Additionally, generational tailwinds driven by millennials and Gen Z reaching the peak age for household formation and more seniors opting to age in place, continue to support household formation growth. These structural and generational factors underpin the industry's strong core fundamentals. Repair and remodeling activity has been held back by diminished levels of existing home turnover and from homeowners delaying large repair, remodel projects due to the high cost of accessing their equity combined with economic uncertainty.

We expect consumer confidence to improve with lower interest rates and greater clarity on U.S. economic policy. These factors collectively create a long runway for growth in repair and remodel projects. In addition, consistent investment in our Wood Products assets across all phases of the business cycle is critical to driving overall growth as it enhances efficiency during market downturns and enables greater operating rate flexibility and product availability for our customer base when demand regains momentum. Lastly, markets with limited clarity make for distribution-friendly environments and we look forward to, again, demonstrating the value proposition of two-step distribution across a broad mix of products in periods where there is near-term demand or price uncertainty like we're experiencing today.

As always, we stand ready to serve our customers and expect they will place additional reliance on our [ auto ] warehouse capabilities given the environment. Thank you for joining us today and for your continued support and interest in Boise Cascade. We would welcome any questions at this time. Corey, would you please open the phone lines?

Operator: [Operator Instructions] Our first question comes from Kurt Yinger of D.A. Davidson.

Kurt Willem Yinger: Just wanted to start off on EWP, year-to-date LVL volumes up [ 2 ], even I-joist down 4 is nicely outperforming kind of what we're seeing in terms of seeing the family starts. Can you talk a little bit about what's driven that performance gap? And similarly, what we should maybe take from the difference between kind of LVL and I-joists volume trends?

Nathan R. Jorgensen: Kurt, it's Nate. Let me start that. I think when it comes to the LVL market, I think it has probably a little bit better resiliency in terms of just the different application opportunities that exist in the marketplace today. So when you think about obviously beams and headers, wall framing, those are all growth -- continue to be growth opportunities for, I think, our LVL category. I-joists is pretty much centered on floor systems. And so that can have maybe a more limited opportunity or upside, just given kind of some of the dynamics there, including some of the competitive factors on plated floor trusses and dimensional lumber as well as a slab on [ grade ] construction.

So I think overall, we feel really good about our footprint and representation at both LVL and I-joists. And I-joists will have a little bit different cadence in terms of takeaway in some cases, depending upon where those housing starts are, as well as some of the competitive challenges that might be out there.

Kurt Willem Yinger: Okay. So is it fair then, Nate, to say in terms of even I-joists kind of outperforming on the single-family side, maybe that's a mix of where starts are occurring, maybe a little bit of share shift kind of back from plated floor truss? Or I guess, as you think about your dealer partnerships and things like that, do you feel like you're kind of gaining wallet share?

Operator: One moment for a technical difficulty. We'll be right back. [Technical Difficulty] [Operator Instructions]

Nathan R. Jorgensen: Corey, can you hear us now?

Operator: I can hear you again.

Kurt Willem Yinger: Yes. Sorry, just following up there. In terms of -- you talked about kind of geographic mix of starts, the competitive dynamics in terms of floor systems. I guess as you kind of look across the customer landscape, whether it's builders or dealers, do you still feel like you're gaining wallet share there? Or the relative performance is mostly due to those other factors?

Operator: One moment while we're working on technical difficulties. [Technical Difficulty]

Nathan R. Jorgensen: Can you hear us? All right. Now we're getting feedback loop, though. Can hear that. [Technical Difficulty]

Operator: Kurt, will you please ask your question one more time?

Kurt Willem Yinger: Yes, sure. Maybe just switching gears on in terms of the EWP destock kind of referenced in Q3, is there, I guess, a good way to think about the sizing of that and whether that might spill into Q4 as well?

Nathan R. Jorgensen: In terms of [Technical Difficulty] maybe the way I would think about that is not just on EWP, but other products as well, is the purchase profile that's going to be likely changing. So maybe there's going to be less mill direct but there's going to be more activity in terms of units and job packs and pieces out of distribution. So that theme has been really clear from our customers in terms of how they're going to manage their working capital as they go through the course of 2025 and probably early into '26 on a range of products.

And so even though the inventory may change a little bit or the order patterns may change a little bit out of our mills, again, we think the consumption will be heavy out of distribution out of our warehouse, which again, we're really well set up to go perform and execute to that standard.

Operator: Our next question comes from George Staphos of Bank of America.

Brad Barton: This is Brad Barton, on for George. Just starting off quickly, if you guys could just talk to the operating rates across the business? And relatedly, I guess, how do you see EWP pricing going forward, given the trend downward over the last several quarters? At what point do we see a bottom? And what's the catalyst to inflect there?

Troy Little: Yes. This is Troy. In terms of operating rates in the second quarter, we entered the quarter with the idea that we would run full out to be prepared for the building season. Obviously, late in the quarter, that started to play out. But during the quarter, our operating rates were in the low 80s on the EWP side. With the Oakdale out, we just wanted to maintain the inventory to not get caught off guard. Now that we've got Oakdale back up, the plywood side, we finished the quarter in the probably 70-ish percentile. Without Oakdale, we're probably closer to 80%.

[Audio Gap] Quarter, to Nate's point, that he just made, our operating rates probably are going to be down 70-ish -- 65%, 70% type range, depending on demand and that destocking effect of that.

Brad Barton: Okay. Great. And then one follow-up for me. To the extent that you guys can comment, we saw the news about the strike at the billings facility. Just if you can give any update there. And any color on that facility in terms of the size or potential impact there? That would be very helpful.

Joanna Barney: This is Joe. I can comment on that. So on July 29, we have 19 union representative employees at our BMD facility in Billings, Montana that initiated the strike. That strike is still ongoing as of today. It's limited to just one of our 38 BMD locations. We have implemented business continuity protocols, and our Billings team is doing a very good job of avoiding any disruptions to our customers. And at this time, the situation is really limited in scope, and we don't anticipate that there will be a material impact.

Operator: Our next call comes from the line of Susan Maklari of Goldman Sachs.

Susan Marie Maklari: My first question is on the general line part of the business. You saw some really nice results there despite all the pressures that are coming through. Can you talk a bit about how you're thinking about the next couple of quarters there, given some of your suppliers focused on getting price and also maintaining inventories on the ground, given the conditions? [Technical Difficulty]

Operator: One more time, can you ask your question, please, ma'am?

Susan Marie Maklari: Sure. Can you guys hear me okay?

Operator: Yes.

Susan Marie Maklari: The question is on the general line part of the business, given the conditions that you're seeing out there, can you talk about how that is performing? And also as you see some suppliers that are looking to get pricing and control inventory, how that is going to impact results over the next couple of quarters?

Joanna Barney: This is Joe. Yes. So in Q2, our general line category has actually held up really well. We feel like we're well positioned there from an inventory perspective as our customers have leaned out their inventory. Going into Q2, there's disruption and uncertainty in the market. Our customers have leaned heavier on to our inventories and distribution. So we saw ourselves out of warehouse pick up in Q2 pretty significantly. And yes, our general line categories remain strong. We think that they will remain strong, going into the balance of the year. I don't see any changes happening there.

Susan Marie Maklari: Okay. That's helpful. And then in your prepared remarks, you talked about aligning production to demand. As you think about the operating backdrop across the business, can you talk about some of those efforts? How we should think about the cost structure of the business and the potential benefits to the margins as those efforts come through to results?

Troy Little: Yes. So, this is Troy. In terms of just the operating posture, like I mentioned, we went into the quarter planning on running full. So right now coming out of Q2, our inventory at the mill level are at the higher end on the EWP side. So we're now -- we're positioned to -- if the demand is there, which looks like it's -- it may not be what we expected, we would end up just moving veneer over to the plywood side first. If we can do that to continue to move that veneer, we would essentially continue to run our veneer operations somewhat full.

And then we did take some time in early July, and we would anticipate some down -- market-related downtime. And we would anticipate if we needed to do that, we would line up around major holidays as necessary.

Kelly E. Hibbs: And then maybe one other comment, Sue, to add on would be we won't -- we don't expect to obviously have the drag on Oakdale being down like it was in the first half of the year. And included in that, the value of self-sufficient veneer versus having to buy some on the open market, we will get the benefit of that. And then if OSB prices stay where they are, we would expect some tailwinds also for web stock cost for [indiscernible].

Susan Marie Maklari: Okay. That's helpful color, Kelly. And can I squeeze one more on EWP? As you think of -- as the builders talk to going into 2026 with less inventory on the ground, can you talk about the competitive backdrop and what that could imply for the dynamics within that business as we think about the upcoming quarters?

Nathan R. Jorgensen: Sue, it's Nate. Sorry. Yes, so I think just in terms of kind of the competitive dynamics on whether EWP or other products, I think it's going to be the -- will remain probably a challenge as we go through the course of this year and early next year, just given kind of what we expect in terms of the demand environment. But with that said, I think when you think about EWP and what the builders are still looking to do on the job site, cycle times remain important. And so we know that I-joists and EWP create a better deliverable in terms of reduced cycle times at the job site.

So I think that, in combination with the design flexibility, again, we still feel really good about how we're set up in terms of EWP going through the balance of the year and early next year. The other thing I would just comment on is when you think about engineered wood products, really the importance of gray two-step distribution in support of that product [Audio Gap] And we are really well set up as an organization with our Boise Cascade EWP franchise. We've got great distribution in the marketplace.

So having not only product on the ground, but the ability for drawings and services, we feel really good about how we're positioned to serve the marketplace, even on a higher level as we close out this year. So it's going to be, I think, in terms of the competitive landscape, nothing will change, but that's -- I think we're well positioned to compete and win in that kind of environment as well.

Operator: Thank you very much. At this time, I am showing no further calls. I would like to turn it back to Nate Jorgensen for closing remarks.

Nathan R. Jorgensen: Okay. We appreciate everyone joining us today. And our apologies for the technical challenges, so thank you for your patience as well and your continued interest in support of Boise Cascade. With that, we'll close up the call. Please be safe and be well. Thank you.

Operator: Thank you very much for your participation. This does conclude the conference.