KLA-Tencor Corp (KLAC) Q4 2019 Earnings Call Transcript

KLAC earnings call for the period ending June 30, 2019.

Motley Fool Transcribers
Motley Fool Transcribers
Aug 6, 2019 at 3:23AM
Technology and Telecom
Logo of jester cap with thought bubble.

Image source: The Motley Fool.

KLA-Tencor Corp (NASDAQ:KLAC)
Q4 2019 Earnings Call
Aug 5, 2019, 5:00 p.m. ET

Contents:

  • Prepared Remarks
  • Questions and Answers
  • Call Participants

Prepared Remarks:

Operator

Good afternoon. Ladies and gentlemen, my name is Jerome and I will be your conference operator today. At this time, I would like to welcome everyone to the KLA Corporation Second Quarter 2019 Earnings Conference Call

[Operator Instructions] Thank you. Now it's my pleasure to hand the call over to your host, Mr. Ed Lockwood with KLA Corporation, Investor Relations. The floor is yours.

Ed Lockwood -- Senior Director, Investor Relations

Thank you, Jerome. Good afternoon, everyone, and welcome to our conference call. Joining me on our call today are Rick Wallace, our President and Chief Executive Officer; and Bren Higgins, our Chief Financial Officer.

We're here today to discuss quarterly results for the period ended June 30th, 2019. We released these results this afternoon at 1:15 Pacific Time. If you haven't seen the release, you can find it on our website.

Today's discussion of our financial results will be presented on a non-GAAP financial basis, unless otherwise specified. A detailed reconciliation of GAAP to non-GAAP results can be found in today's earnings press release and in the investor presentation posted on the KLA Investor Relations website.

There you'll also find a calendar of future investor events, presentations, and conferences, as well as links to KLA's SEC filings, including our annual report on Form 10-K for the year ended June 30, 2018. In those filing you'll also find descriptions of risk factors that could impact our future results.

As you know our future results are subject to risks. Any forward-looking statements, including those we make on the call today, are subject to those risks and KLA cannot guarantee those forward-looking statements will come true. Our actual results may differ significantly from those projected in our forward-looking statements.

With that, I'll turn the call over to Rick.

Richard P. Wallace -- President and Chief Executive Officer

Thank you, Ed. Good afternoon, everyone, and thank you for joining us for today's call. Q2 was another solid quarter for KLA with results finishing above the midpoint of guidance demonstrated in the Company is benefiting from our strategies for growth and market leadership while delivering strong relative performance in a challenging year for the industry.

I'd like to provide some insights into today's equipment demand environment. Even with the signs of stabilization in NAND pricing, DRAM continues to be weak and the business environment in memory is soft. This has resulted in broad-based low levels of investment as customers have idled existing capacity and delayed new capacity plans as they focus on rebalancing supply and demand.

The weakness in memory is being offset by rising demand from foundry and logic, which are traditionally strong markets for KLA. The business environment in foundry and logic is expected to continue to be strong through the second half of 2019 and into 2020 driven by next-generation technology development, capacity additions at the leading edge, increasing competitive dynamics, and investment in EUV infrastructure. Altogether, our outlook for WFE investment in 2019 remains consistent with the initial view we held in January, with demand expected to decline by approximately 20% in the year and with a significant shift in product mix to foundry and logic.

Now I'd like to update you on some recent product highlights from our semiconductor process control business. KLA's market leadership is enabled by successful execution of a portfolio strategy focused on differentiation to address our customers' most critical challenges. We're very pleased with our product positioning and the strong customer acceptance we are experiencing across our portfolio.

For example, we are currently seeing accelerated adoption of our flagship Gen 5 optical inspection platform, which is now in its second iteration since first being introduced in 2016. We expect Gen 5 shipments to double in 2019 compared to the previous year. Customers are leveraging the combination of sensitivity and throughput in this platform to enable unique detection of yield-limiting defects at significantly lower cost of ownership compared to the alternatives.

The strong customer adoption of Gen 5 and the continued success of the Gen 4 platform, now in its fifth iteration, are further confirmation of the success of our multi-generation platform strategy for innovation and market leadership in optical inspection. Further, the latest generation of our laser scattering optical inspection platform, known as Voyager, is also enjoying strong adoption in the marketplace. Leading memory and foundry customers are deploying Voyager for in-line monitoring application in high-volume manufacturing.

In mask inspection, the strong momentum which we have experienced over the past several quarters continues and is positioned to extend through 2020. We are seeing upside from leading foundries for our latest generation mask inspection platform and expect demand to broaden as customers move ahead with their EUV deployment strategies.

In metrology, as WFE is transitioning more toward logic and foundry, we're seeing strong adoption of the new film and CD platforms released last year as our customers ramped complex technology architectures like finFET, new materials, and new metal interconnects. And with the recent acquisition of Orbotech, we are further diversifying our business, broadening our product portfolio and growth opportunities and serving a larger market. Integration and synergy activities are now well under way, and we're very excited about the growth opportunities in combination with Orbotech. We look forward to further discussions of this in our upcoming Investor Day in September.

In summary, despite uncertainty in the current industry demand environment, momentum is building for KLA, driven by strength in our semiconductor process control business and contributions from the recent acquisition of Orbotech. As a result, we are on a path for strong relative performance in 2019 while we continue to drive innovation and introduce differentiated products and solutions to serve the market when growth reaccelerates.

With that, I'll turn the call over to Bren for his commentary on the Q2 financial results. Bren?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Thanks, Rick, and good afternoon, everyone. Total revenue in Q2 was $1.258 billion and above the midpoint of the range of guidance. GAAP earnings per share was $1.35 and non-GAAP earnings per share was $1.78, each finishing at the upper end of the range of guidance. Total shipments were $1.354 billion, approximately $79 million over the midpoint and exceeding the high-end of the range of guidance for the quarter.

Semiconductor process control shipments were approximately $1.080 billion. We're pleased with the results we've achieved in the June quarter despite significant noise and uncertainty in the global electronics market, as we continue to focus on executing our business across all markets and move forward with our integration and synergy plans from the Orbotech acquisition.

Beginning this quarter, we will report our results under the new segment reporting structure that we adopted subsequent to the completion of the Orbotech acquisition and you will see this reflected in our Form 10-K when it is filed. Under this new structure, we will report the KLA process control business in the Semiconductor Process Control segment and we'll separate the former Orbotech businesses into two segments, Specialty Semiconductor Process and PCB, Display and Component Inspection. The latter segment now includes the former ICOS component inspection business of KLA. We believe this new segment reporting structure best reflects how our business is organized and the unique characteristics of each segment in terms of channel, markets, and technology. Results from the applicable services components will also be included within each segment.

In addition, the June quarter will be the last quarter we report shipments in our earnings call, and we will no longer provide shipment guidance going forward. As explained in detail in the earnings call last May, under ASC 606 for revenue recognition, the overall timing of revenue shifts forward, and as a result, the difference between shipments and revenue is immaterial and doesn't warrant the resource commitment to maintain dual reporting. Subsequently, investors can assume a close approximation of shipments to reported revenue in any given quarter.

Now for the June quarter results. As I mentioned, total revenue in the second quarter were $1.258 billion. We expect total revenue to grow about 7% at the midpoint and be in a range of $1.31 billion to $1.39 billion in the September quarter, and for the second half revenue levels to be higher than the first half with continued sequential growth expected in the December quarter across all our business segments.

I'll now turn to some detail and commentary regarding segment revenue trends in the June quarter. For the Specialty Semiconductor Process segment, which Ed stated represent all legacy KLA, except our component inspection business, revenue was $1.003 billion in the quarter. Component inspection revenue was just over $728 million. As Rick discussed in his opening remarks, our view of the WFE demand environment for 2019 remains mostly consistent with our original view from January, with KLA benefiting from stronger foundry and logic demand.

I would note that on the margin over the past six months, although review of the overall demand environment in 2019 is unchanged, the near-term outlook for foundry and logic investment has improved, offset by declines in memory. In fact, over the course of the June quarter, we've seen our overall second half expectations improve modestly. Our current view for the Semiconductor Process Control business is for the second half revenue to be up in the low-double digits versus first half of the calendar year, as we now expect revenue from foundry and logic customers to be up over 35% versus the first half. Memory investment remains weak and directed toward technology migration mostly only.

Memory was approximately 51% of Specialty Semiconductor Process system shipments in June, and we expect memory to be approximately 42% of system revenue in the September quarter. Foundry was 35% of shipments and is forecasted to be about 44% of system revenue in Q3. Shipments from logic customers were 14% and the current outlook is for logic revenue to be approximately flat in September.

Turning now to the Specialty Semiconductor Process segment, the former SPTS division of Orbotech. SPTS is a leader in PVD and etch solutions in fast-growing specialty semiconductor applications like MEMS, sensors, power and RF devices, as well as in advanced packaging markets. Revenue for SPTS was $67 million. June quarter results for this business were impacted meaningfully by the US Department of Commerce ban on shipments of RF and MEMS semiconductors to Huawei as customers with Huawei market share delayed planned capacity investments. As a leader in etch and deposition tools for these markets, SPTS saw delay in a portion of its expected business due to this ban. Though the longer-term implications of this action are not clear, notwithstanding this issue, SPTS is still expected to deliver year-over-year pro forma revenue growth in calendar year '19.

Revenue for the PCB, Display and Component Inspection segment was $185 million. This segment includes the former PCB and display businesses of Orbotech and KLA's ICOS component inspection business. Results for this segment were in line with our expectations for the quarter and are on track with our plans for this year.

Now I'll discuss the distribution of revenue by major product category in Q2. Wafer inspection was 32%, patterning which includes reticle inspection was 23%, wafer inspection and patterning or part of the Semiconductor Process Control segment. PCB, Display and Component Inspection revenue was 10%, and Specialty Semiconductor Process was 4%. Other, which includes solar, instruments, and the KLA Pro, mature products enhancements business, was 4%. Service was 27% of revenue in the June quarter. In terms of the regional split of revenue. China was 32%, Taiwan was 25%, the US was 15%, Japan was 10%, Korea was 8%, Europe was 6%, and the rest of Asia was 4%.

Now for more detail on the results in the P&L. Gross margin was 58.9% in June, at the top end of the guided range for the quarter of 58% to 59% as a higher level of Semi Process Control revenue offset the Huawei effect on our Specialty Semiconductor business. We expect gross margin in the September quarter to be in a range of 60% to 61% as a more favorable product mix in our Semi Process Control business and higher expected service margins drive gross margin improvement in the quarter. Looking ahead, we believe there are many opportunities for us to improve the Orbotech gross margin profile across the businesses by leveraging our global supply chain, service infrastructure, and global footprint. We will discuss these initiatives in more detail over the coming quarters as we get a firm picture on the timing and financial impact of these actions.

Total operating expenses were $370 million in June, below the guided $375 million target, due to lower-than-expected expenses across the business and some synergy benefit from Orbotech. Operating margin was 29.5%. We expect quarterly operating expenses to be in a range of $370 million to $375 million for the remainder of calendar '19 consistent with the timing of our planned product development investments and the realization of initial synergy activities.

Other income and expense in the June quarter was $38 million, and we expect OIE to be approximately $36 million this quarter. The effective tax rate was 13.7% and going forward investors should continue to model our tax planning rate at the 14% level given the new corporate tax structure in the US and our expectations for the geographic distribution of profit. Net income was $289 million, and we had $162 million diluted weighted average shares outstanding.

Now for some highlights on the balance sheet and cash flow statement. Cash and investments were $1.7 billion and total debt was $3.4 billion. Cash from operations was $325 million and free cash flow was $270 million. We are making the infrastructure investments to support our future growth, including the construction of a new building at our Milpitas headquarter site and a new facility in Ann Arbor, Michigan. We expect annual capital expenditures to exceed for the next few years due to these projects and other infrastructure investments necessary to sustain our future growth expectations.

In the June quarter we paid an aggregate of $121 million in regular quarterly dividends and dividend equivalents upon the vesting of restricted stock units and repurchased $345 million of common stock at an average share price of just below $112 per share, pursuant to our share repurchase program. We have approximately $900 million available under our current share repurchase authorization. For September, we expect a fully diluted share count of between 159 million and 160 million shares.

In conclusion, the June quarter results demonstrated strong operating performance. With our diversified end markets, continued technology leadership across a broad product portfolio, and operational discipline, KLA is positioned for strong relative performance in 2019, and we are encouraged by the momentum we are seeing in our business.

With that, to summarize, guidance for the third quarter is: revenue between $1.31 billion and $1.39 billion, GAAP diluted EPS of $1.75 to $2.05 per share, and non-GAAP diluted EPS of $2.04 a share to $2.34 per share. Before turning the call over for your questions, I'd like to remind investors that we have scheduled our 2019 Investor Day for Tuesday, September 17th in Midtown, New York. We look forward to seeing you there.

I'll now turn the call back over to Ed to begin the Q&A.

Ed Lockwood -- Senior Director, Investor Relations

Thank you, Bren. As we begin the Q&A, we request you limit yourself to one question and one follow-up. Please feel free to requeue if you have any additional questions, which we will accommodate as time permits. Jerome, we're ready for the first question.

Questions and Answers:

Operator

[Operator Instructions] Your first question comes from the line of John Pitzer with Credit Suisse. You're now live.

John Pitzer -- Credit Suisse Securities (USA) LLC -- Analyst

Yeah. Good afternoon, guys. Appreciate letting me ask questions. Congratulations on the solid results. Rick, it's good to see foundry, logic performing strongly in the calendar second half with expectation that that continues into 2020. I'd be kind of curious as you look at the memory market and differentiate between NAND, DRAM, and maybe process control and bare wafer, how do you think that market plays out in the back half of the year. Which quarter do you think it bottoms in and how do you think about the recovery potential in 2020?

Richard P. Wallace -- President and Chief Executive Officer

I'll give some thoughts and then let Bren weigh in. Right now we don't see -- as we said, we don't see a lot of momentum in DRAM. I think what we've got now is some strengthening I think -- we think in the foundry and logic as we said, but not a lot other than technology migration and not a lot of capacity. So if you think about when the recovery might come for NAND, probably first half of 2020 and DRAM what our customers are saying now is more mid-2020 timeframe before we'd see any meaningful change.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah, John. I would say that -- I'd characterize the market as what we're mostly seeing is technology migration investment only. And one thing about KLA is since we do help our customers navigate their roadmap transitions, we are seeing some level of business from some of these customers. There is also some activity in China. We saw some last quarter influenced our shipments, and we expect to see some more in the second half of the year. But to Rick's point, I think as we look at the overall market, I wouldn't expect to see any meaningful capacity adds until we get into 2020. And given the customers have been disciplined in pushing out capacity, they've been idling capacity, how quickly that comes back it's a little early to tell from this point.

You mentioned bare wafer. On the bare wafer side, we see our business bare wafer being roughly flat into the second half of '19. Now '19 overall for that business is lower than it was in '18. We had a huge inflection in '18. We've seen it come off a bit in '19, probably comes off a little bit in '20. I think we're operating at a more sustainable or a higher level for that business moving forward given the dynamics around memory, around specifications, both for inspection but also for metrology.

So in the numbers that we've provided in the commentary, I think that's been part of our view in terms of expectations moving forward. So I wouldn't say that much has changed there and that's something certainly we've been -- we've been pretty open about.

John Pitzer -- Credit Suisse Securities (USA) LLC -- Analyst

That's helpful, guys. Then maybe as my follow-up. Rick, I'd love to get your comments on just inspection and process control intensity in foundry, logic as you move to 5-nanometer and then to 5-nanometer. And I guess, it's kind of a complex equation. How does EUV benefit you guys in the business going forward?

Richard P. Wallace -- President and Chief Executive Officer

Sure, John. I think there are couple things: one, we mentioned the strength in Gen 5 and a lot of that is driven -- of course, logic is going to drive that harder, and we're seeing that transition from Gen4 to Gen5 in terms of the bulk of our system. So the design will shrink, are going to drive smaller defectivity requirements driving us toward the Gen5.

The other thing that's happening is overlay is a big driver for us in terms of the additional pressure put on our customers as they drive advanced design rules. Eventually we're seeing that in a couple ways. One, we're seeing it in the mask shop with a number of starts pre-EUV but also the anticipated large number of EUV but also the printdown checks, because I think what's really going to happen for a while, as people are going to want to verify the designs, it's another use for Gen 5.

So overall, we think there's going to be an increase in process control intensity. As we introduce EUV, I think that that's more in the development phase. Longer term I think it levels out a bit as we get into high-volume production later. But right now definitely the mix is favorable to us in terms of what we're seeing. We also mentioned, increased competition in foundry and that's also been a driver I think to the mix shift overall.

John Pitzer -- Credit Suisse Securities (USA) LLC -- Analyst

Thanks, guys. Congratulations.

Richard P. Wallace -- President and Chief Executive Officer

Thank you.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Thanks, John.

Operator

Your next question comes from the line of Harlan Sur with JPMorgan. You're now live.

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Good afternoon, guys. Nice job on the quarterly execution and strong outlook. In terms of the strong results and outlook specifically within your mask or reticle inspection business, EUV system shipments looks like they're going to grow about 70% this year. If I look into next year at the installed EUV base, it's still growing about 50% to 60%. So given your guys' very high market share at the mask shops, how do you see your mask shop inspection business directionally this year? And do you guys already have visibility into the directionality of this segment next year just given the long lead times and continued growth of the installed base?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah, Harlan. It's Bren and I'll go first here, but if you look at the reticle inspection business, couple things are driving it. First, significant tapeouts in the foundry at 7-nanometer, and so that's driving significant purchasing of the product. You have to remember that reticle inspection in a mask shop behaves similar to process where you're inspecting ever reticle before you ship it to the fab. So it has some unique dynamics in terms of how customers buy relative to the design starts and they move together. That's one dynamic and that's driving the business.

The other obviously is the EUV development activity that's also driving the Teron system. So you have both effects. Frankly, the biggest driver today is more around the design starts at 7-nanometer, and it's driving that business to have nice solid growth in a year obviously where WFE is down. So we're seeing growth in that, and as Rick said in his prepared remarks, we would expect that to continue into 2020.

Timing of EUV deployment, how we see that plays out next year. Well, it'll potentially influence some of the upgrades to the existing installed base out there, but there is some sustainability in the business, and we're seeing a nice recovery in it, and then we'll see about next-generation products as they come out as we move into the second half of next year to support EUV directly.

So there's a lot of exciting things happening in that space, and we're seeing the numbers flow through in terms of P&L impact.

Richard P. Wallace -- President and Chief Executive Officer

I think just to build on one aspect of it. I think the fact that we have extended the Teron platform to be able to handle these EUV layers, we benefit whether or not depending on the number of EUV layers, we still benefit because we've got an optical platform that can handle either the mask for EUV or for traditional lithography.

So I think that's part of why we're benefiting more depending on the starts and just the intensity of the advanced nodes than necessarily just on the EUV because it's still not clear how many layers and at what nodes they're going to be adopted, but we're seeing strength in reticle regardless of which way that goes.

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Great. Thanks for the -- thanks for the insights there. And then you guys were thinking 90 days ago that there was an upward bias for the Orbotech business moving into the second half of the year, but just given all of the China trade overhang, given that Orbotech has a number of large China [Phonetic] customers, do you guys still see the second half of this year will be better for the Orbotech team? And if so, maybe a bit of color on what segments are improving in the second half? I would assume that Specialty Semi is doing well just given the strong focus on RF and power, but what about FPD and PCB?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yes. Our growth expectations for Specialty Semi have come down a bit for this year, directly related to the Huawei affect. It's an indirect effect, but you do have customers in the RF space that have market share with Huawei phones. And so they've gotten more cautious in some of their plans for capacity, and that's impacted that business.

So that business is still going to grow year over year, but probably not to the degree that we expected 90 days ago before the ban came out. I would say PCB and flat panel are in line with our expectations. PCB flattish, flat panels down this year, but most of the growth for the business was going to come from Specialty Semi. So there's still some growth there year to year, but a little bit less given the Huawei effect.

Richard P. Wallace -- President and Chief Executive Officer

Yeah, but just to put it into perspective, Harlan. We're still within a few percentage of what we had originally modeled in terms of profitability and contribution [Indecipherable] life of the business. So it still looks good. As Bren said, some kind of shifting dynamics. So not really that different from what we thought earlier in the year.

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Yeah. Great job on the execution. Thank you.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Thank you.

Operator

Your next question comes from the line of Timothy Arcuri with UBS. You are now live.

Timothy Arcuri -- UBS Warburg LLC -- Analyst

Thanks a lot. I guess the first question, Rick, is that there have been some other companies in your broader sector that the past couple weeks have talked about some pull-ins from China that are sort of helping the back half of the year. And I know you talked last quarter about a big project that was out of the second half and now sort of back in the second half. But what are you seeing generally in China? I guess, is it your view that the trade stuff only increases the pace of these projects as you kind of look into the back half of the year and into next year?

Richard P. Wallace -- President and Chief Executive Officer

We have definitely seen some puts and takes in China, Tim, to the point, but we're seeing what others are seeing where -- some maybe increased urgency in terms of the second half to get those projects fully up. And as you know, there's just a lot of noise in the system in terms of what effects might come in. The only substantial thing we've seen is a very small part of our business, as Bren mentioned. But overall, pretty much where we thought in terms of the second half having some strength in it.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. I think the DRAM project that pulled in, it's interesting it started beginning of the year. We thought it was completely out. Now it looks like we'll see it ship in the second half of the year. We're seeing, to Rick's point, some puts and takes related to some of the wafer plants in China. So overall, I would say, our expectations for China business this year versus where we thought are probably on the margin slightly higher than where we were before but not a lot of change there, overall

Timothy Arcuri -- UBS Warburg LLC -- Analyst

Okay, Bren. Thanks. And then I guess as a second question, I'm wondering if you can quantify in the Spec Semi's segment how much the sort of indirect Huawei ban is. Is it something like $10 million to $20 million a quarter? Is that what it's costing you sort of into the back-half of the year? I'm just sort of trying to baseline what the business would look like if this ban had not -- or is not in effect.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. So, Tim, I think in the immediate quarter you'll see some adjustments to plan. [Indecipherable] quarter the impact was between $20 million and $25 million, and certainly some of the strength in other parts of our business helped us achieve our results for the quarter.

That number probably goes up to the $35 million-ish, plus or minus, as we move into the second half of the year in terms of our expectations. So probably -- in total, so probably somewhere around $35 million, $40 million impact on calendar '19.

In the long run, it's interesting, as those -- as other providers that are non-US providers start to ramp their capacity that creates an opportunity for the Specialty Semiconductor business there. So in the long run -- and they're in a inferior position. So in the long run there potentially is a big opportunity out there in terms of how the designing around the supply chain works. But in terms of the current year the impact is probably somewhere between $35 million and $40 million in total.

Timothy Arcuri -- UBS Warburg LLC -- Analyst

Okay, guys. Awesome. Thank you so much

Richard P. Wallace -- President and Chief Executive Officer

Jerome, next question.

Operator

Your next question comes from the line of Krish Sankar with Cowen. You're now live.

Krish Sankar -- Cowen & Co., LLC -- Analyst

Yeah, hi. Thanks for taking my question. First one for Rick or Bren. I know you guys have not given out your guidance, but if I look at some of the commentary you made in terms of strength of foundry lasting into first half of '20 and NAND in first half, and maybe DRAM in the second half of '20 recovering, is it fair to assume that your legacy KLA, the business is going to be up in calendar '20 versus calendar '19? And if so, what is the risk to that estimate? And then I had a follow-up.

Richard P. Wallace -- President and Chief Executive Officer

Yeah. So let me take the first part and then give it to Bren. So we're not going to call it legacy. It's a process control business, now that we have other businesses. And the trajectory is good. We're going to get into more discussion of the outlook at our Analyst Day next month, but definitely, we feel like things are coming our way in terms of the right kind of market momentum, the advanced design rule work that's going on, in addition to some of the competitive dynamics. We talked about Gen 5 strengthening and some new projects -- new products hitting the market. So we feel very good about overall position. And Bren can talk in broader terms.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. I think we feel pretty good about logic, foundry and sustainability of spend levels into 2020. So I think if you look across those end markets and you look at the activity there, we would expect to see continued investment. We talked about competitive dynamics. The strength of the 7-nanometer node out there is also limiting how much reuse customers can do. And so that's certainly having an effect as well. You'll see automotive and industrial hopefully start to come back next year. And so as you think about the broader demand across all of logic, foundry I think there are a number of drivers that give us some confidence moving into next year about those segments.

Krish Sankar -- Cowen & Co., LLC -- Analyst

Got it, OK. And then for follow-up, you guys introduced a new e-beam wafer defect review product recently, and I'm kind of curious, how do we think about the coexistence of Gen 5 and e-beam down the road for your product portfolio and is this e-beam kind of just targeted toward specialized applications. So just kind of curious on how to think about the lay of the land for your products? Thank you.

Richard P. Wallace -- President and Chief Executive Officer

Well, I think what we said all along is we think there is a complementary role for optical and e-beam, and this continues that. I think that what we have in our latest technology is a very capable e-beam tool that when our customers utilize with our advanced optical, they really get the best of both in terms of capabilities for the market. But I don't think they'll ever be a day where there is not a complementary e-beam solution with optical. Optical keeps getting better, e-beam has to get better, too, but I think the general mix between e-beam and optical will remain about the same in terms of the way customers spend their dollars. But we're very excited about what we've seen in the market, and we think the synergy of having our optical tool, coupled with our e-beam, is really great for our customers trying to solve some of their very challenging problems.

Krish Sankar -- Cowen & Co., LLC -- Analyst

Thanks, Rick.

Operator

Your next question comes from the line of CJ Muse with Evercore ISI. You are now live.

CJ Muse -- Evercore Group LLC -- Analyst

Great, thank you. Good afternoon. Thanks for taking the question. I guess I wanted to follow up on that last question regarding your expectations for the sustainability of foundry strength to continue through 2020. I guess within that, could you speak to I guess both your positioning within Gen 5 EUV, e-beam, perhaps new products that you haven't announced yet, but you just highlighted. And then also from an end market perspective, in terms of rising competition as you look at Samsung coming in, would love to hear I guess in more detail your thoughts on that front?

Richard P. Wallace -- President and Chief Executive Officer

Yeah. So -- this is Rick. I'll talk more sentiment than actual numbers in terms of 2020 because we really don't know. But you can always tell how your customer is behaving, what the mood is in the market. And right now we're actually in a situation where we see a lot of energy around our customers pushing for new capability, pushing for getting their advanced designs out, you see a lot of tape-outs, the mask business has been good. So definitely feel strong.

The other thing not to be missed what Bren mentioned is we don't see a lot of reuse is happening because of some of the challenges of the new technologies. So that was something that we were trying to really map out to see what it was going to look like. And the combination of new capability on our side, new challenges on our customer side make us feel like it looks very strong in terms of the momentum. How long into '20, we don't really have great visibility into that. It's just now we have a case where you've got multiple players really concerned about bringing out new technology and ramping new devices. And at the same time we're hitting with some products that are new to the market and very exciting for us.

CJ Muse -- Evercore Group LLC -- Analyst

Very helpful. Thank you. As my follow-up, could you I guess speak a little bit to your expectations for growth in the service bucket, both for process control as well as for overall Orbotech?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah, CJ. So in process control, for those process control customers, we believe we have a long-term trajectory somewhere in that 9% to 10% CAGR opportunity over time. We're adding tools to the installed base at a much faster rate than they're coming off. So that creates opportunities for us.

75% of that revenue stream is contract based because of customers' desire to keep those tools up and how they buy process control, also just the general complexity of what we sell. So that's good for that business. We've seen it slow a little bit in the near term related to just some of the idling of capacity that's well understood in the market. But over the long run, we've seen it grow at that rate, and we expect it to continue to grow at that rate over time.

The PCB business for Orbotech has a strong service profile. Say, 95% of the tools are under contract. So of the PCB revenue, we report about 40% of it is service stream. So because of the imaging technology and the need for that tool as enabling for circuit boards, that's a positive trend for that business.

I think on the flat panel side, there is very little service activity, in terms of some consumable parts that are attractive, but there is -- there is some opportunity there for us certainly. And on Specialty Semiconductors, as we think about how we try to leverage our position in working with customers to offer better solutions over time, there might be an opportunity for us to help customers that way on the specialty side.

Smaller companies always have a harder time with service just the broader footprint. So maybe what we end up doing is enabling a better cost position for both flat panel and for Specialty Semi, but a lot of opportunity for us moving forward I think in terms of driving that string for the Company.

CJ Muse -- Evercore Group LLC -- Analyst

Thanks, Bren.

Operator

Your next question comes from the line of Vivek Arya with Bank of America Merrill Lynch. You are now live.

Vivek Arya -- BofA Securities, Inc. -- Analyst

Thanks for taking my questions. I had two as well. First on gross margin. So you're guiding gross margins up 160 basis points or so, 60%, 61%. What's driving that? And should we expect margins to continue to expand as your sales potentially grow again in December?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Well, as I said last quarter, I thought there were some unique effects affecting the June quarter from an overall mix perspective in our Semi Process Control business. Not all our products carry the same margin. And under 606, it's whatever you ship is ultimately what you revenue. So some of that was a bit dilutive to our margins, drove the margins down to the almost just sort of 50%.

Moving forward, obviously, we have some growth in revenue, and that's helpful. We're seeing a reversion, sort of, back to a normalized mix on the Process Control side, and I'm expecting to see stronger and higher utilization rates out of the service business in some higher margins in the service overall.

So all those are driving us into the 60% to 61% range, and I would expect to see that as we move into next quarter as well. So a normalizing effect that I telegraphed last quarter off of the June number, and seems like that's where we expect to see the overall as we move into the next six months or so.

Vivek Arya -- BofA Securities, Inc. -- Analyst

Got it. And for my follow-up, Rick, I'm curious, how resilient has your core Process Control Services business been in this cyclical downturn versus what you assume, what went well, what did not go as well. Every time we get into a downturn, we always hope for the resilience of that business, but I'm just curious as you look back, how resilient it actually was over the last several quarters?

Richard P. Wallace -- President and Chief Executive Officer

Yeah, sure. It was pretty resilient. I think that, as Bren mentioned, there was a little bit of softening we saw, but overall, we still see healthy growth rate. It was a little bit under what's been modeled for the long term, but we actually think we'll catch back up with that long-term modeling for a lot of reasons.

I think that the utilization on some of the fabs has obviously been decreased, but the service base is so large now and there's a lot of value in keeping those tools up and running. So we feel pretty good about it still, and I think the slowest quarter was still in low -- upper-single digit, so pretty good about 8%. Bren?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. Back in the worst downturn we've ever had, it's always held up pretty well, right. And I think the other thing about that business was that it's bigger now, right, because it's growing faster than the systems business.

So bigger as a percent of the total, so a solid anchor with we believe an earnings stream that's accretive to the overall. So I think the dynamics are intact. It goes to points earlier about how customers buy service that they need the tools up, they need matching performance, there's general complexity that's hard to deal with, and for all those reasons, they tend to rely on us and want a contract stream to ensure the uptime of those products. And even in difficult environments, they still tend to run the tools and there is a certain amount of businesses that's there for us.

Vivek Arya -- BofA Securities, Inc. -- Analyst

Okay. Thank you.

Operator

Your next question comes from the line of Joe Quatrochi with Wells Fargo. You are now live.

Joe Quatrochi -- Wells Fargo Securities LLC -- Analyst

Yeah. Thanks for taking the question. I was wondering if you could talk about some of the gross margin puts and takes for some of the new products that you launched last month. Can you just help us remind us how we should think about these gross margins ramping over time?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. Joe, it's something I've been talking about. Anytime -- and it really goes back to how we introduce products at KLA. Typically, when we're bringing products out into the market, our focus is on use case validation and driving applications and adoption. And so we usually come out with a product, we're trying to prove it out, and the margins typically are a little bit lower than what I'd say the mature iteration of the previous platform.

Then the engineering team starts to design for cost. We start to look at ways to second source. And as we introduce new subsequent iterations to the product, the margin profile improves. So anytime we have a new one come out, it's a little bit lower and then over time it catches back up.

So it did have an effect on the margin profile, as I mentioned in the prior quarters, and I think we'll see that play out as we move over the rest of this year and into next year. And with a big portfolio like we have, we tend to see some products where there are different stages of that maturity cycle, so they tend to offset each other.

But, generally part of what we do at KLA is ensure the value of what we deliver to customers in terms of how we price and discipline around that. So we ensure that what we're able to deliver product-by-product is pretty consistent, and usually over time, we're able to drive more and more value out of it. And I would say that we're not any different today with the latest round of products.

Joe Quatrochi -- Wells Fargo Securities LLC -- Analyst

Okay, that's helpful. And then on the e-beam side, I was just curious if you could share any kind of early customer feedback that you've gotten so far. Maybe how should we think about the initial ramp for adoption of that solution?

Richard P. Wallace -- President and Chief Executive Officer

The initial feedback, and we're still -- we're out in a number of sites and we're getting feedback and we're doing demos. Feedback is good. We're not ready to start modeling it into the numbers yet, because it does take a while to get the adoption of these platforms going, but we feel pretty good about the technical capability and the production worthiness. It does, as I say, take a little while for customers to adopt enough to contribute meaningfully when we're at a $5 billion run rate.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah. I would say the portfolio approach that we have, these products fit with the portfolio. You've got common capabilities across the tools, common algorithms, common other options that help drive how incremental performance out of the inspectors. So with the review or even baseline ground truth reference tools, it helps sort of enable the broader franchise.

So that's the approach we've taken at KLA. It matters more than ever today with the challenges in the production process, the size of the defects, the noise that happens on the wafer, so across all of that having those capabilities that independently are tough to sometime -- markets aren't always all that big, but collectively across the portfolio, create a lot of value for our customers.

Operator

Your next question comes from the line of Quinn Bolton with Needham. You're now live.

Quinn Bolton -- Needham -- Analyst

Thank you for taking my question and congratulations on the nice results and outlook. I'm just wondering, you mentioned the strength on the Gen 5 tool, you guys introduced the fifth iteration of Gen 4 last month. Just wondering what demand you're seeing for the older Gen 4 systems as Gen 5 ramps.

Richard P. Wallace -- President and Chief Executive Officer

Well it's -- think of it like a lithography mix and match. So what you get is, you end up with customers deploying the most cost-effective solution they can that has the capability that they need, and that really cascades, starting with e-beam, then getting to 39xx, then 29xx, and then the new Voyager platform.

So it's really the easier layers are harder than they used to be on the advanced nodes. So customers will deploy where they can the Gen 4 and then they'll put Gen 5 up against the problems when that's the only way to really solve them. Does that answer your question?

Quinn Bolton -- Needham -- Analyst

That's helpful. Thank you. And then just a follow-up on the China question. You referenced some puts and takes, but generally perhaps a strengthening in that market versus 90 days ago. Do you have any sense if the demand strengthening you're seeing more of a timing shift where projects are getting pulled in or do you think that this is just an acceleration in the roadmap for some of those indigenous Chinese fabs? Thanks.

Richard P. Wallace -- President and Chief Executive Officer

I don't think it's as much about -- I think what happens is there is uncertainty maybe about their own plans and their ability to procure tools. So that may be pushed it out. And then when they realize they could do it, pulled it back in. I don't want to speak for them. But I think it's more that the project's getting solidified, and I think 90 days ago maybe that was more on pause to see if they could even get the toolsets. So that's kind of where we are.

It's not so much about end demand, I don't think, as them staying on some of their plans. And by the way, there are a lot more programs there that we already derated if you go back a couple years ago and had listened to what customers had said, we're getting closer and closer to what we anticipated for 2019 and a going run rate for 2020.

Quinn Bolton -- Needham -- Analyst

Thank you.

Operator

Your next question comes from the line of Sidney Ho with Deutsche Bank. You're now live.

Sidney Ho -- Deutsche Bank Securities, Inc. -- Analyst

Great. Thank you. If you look at the capacity build for the upcoming 5-nanometers, how do you think the rate at which the capacity is being built as compared to previous nodes, say, the 7-nanometers or 10-nanometers. We've heard that the pilot line for 5-nanometers could be little bit bigger than in the past, but just want to hear from your perspective what is driving that kind of changes.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah, I think that -- I'll go first here. We are seeing a little bit stronger adoption level and to the point earlier, you're seeing less migration of other tools from previous nodes, and so that's driving a certain amount of activity. I would expect we'll probably be somewhere between 80,000 and 90,000 wafer starts for 5-nanometer as we get into the -- sort of, through the first part of 2020 or maybe that's toward the end of 2020. So I would say that because of some of those other dynamics related to 7-nanometer we're seeing perhaps more activity for us on the 5-nanometer node.

Sidney Ho -- Deutsche Bank Securities, Inc. -- Analyst

Okay, maybe -- and then my follow-up question is on the China strength that you guys expect in the second half. It seems like you guys talk about the DRAM project being pulled in, but my understanding, is that -- is that true that a lot of that revenue you have already seen it because it seems like they have gone -- most of those customers have gone past the initial yield improvement stage. And from here on out, it's more on a production level type of run rate.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Well, like I said, there are some puts and takes in the overall level of business in China. I think it's slightly better than what we thought before. But there is some rationalization of wafer capacity that's happening likely as well. So while you do have some strength around this particular DRAM project, you do have some other moving parts.

I think the way to think about this business is more about proving out technology roadmaps and then moving on to the next node. So there is some amount of capacity that gets added, but then there's a lot of effort to progress down the technology roadmap. And because of that we're seeing more engagement than you otherwise might because, yeah, yields slightly improving on the trailing node that they're happy to move to the next node, then they are challenged again and need to upgrade certain parts of the toolset.

So that's driving a more continuous level of business, not just with this customer but with other customers, and you might see when you're at some node and then go ramp, it's a significant volume production as in you'd see in one of the leading-edge memory fabs. It's a little different behavior, smaller fabs and more of a focus on trying to move down the technology curve than just ramping a lot of capacity.

Sidney Ho -- Deutsche Bank Securities, Inc. -- Analyst

All right, that's helpful. Thanks.

Operator

[Operator Instructions] Your next question comes from the line of Patrick Ho with Stifel. Your line is now live

Brian Chin -- Stifel, Nicolaus & Company, Inc. -- Analyst

Good afternoon. This is Brian Chin on for Patrick. Thanks for letting us ask a few questions on the PCB and flat panel markets. PCB first. The overlay of Huawei might also cloud things a little bit here. But of the major smartphone ecosystems, it sounds like China has been the laggard in terms of adoption of tighter line and space, SLP and mSAP manufacturing. So have you begun to see the China leader or leaders begin to adopt the Orbotech, or now KLA, imaging products this year, or are we still early on this adoption curve for them as we -- and maybe you'll see that more as we move into next year?

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

Yeah, still not yet. I think we do expect that to see that, and the current expectation is, as you say, it's probably next year. Probably the third guys to do that.

Brian Chin -- Stifel, Nicolaus & Company, Inc. -- Analyst

Okay. That's helpful. And then maybe [Indecipherable] the flat panel. From an early planning perspective, obviously a weak spending year environment this year. But do you see any lead indicators, early indicators for your product lines like the AOI tool that suggests we could see a meaningful pickup in the spending environment come next year? And if you do, does this increase the urgency to pull in some of the cost synergies relative to that 12-month to 24-month horizon?

Richard P. Wallace -- President and Chief Executive Officer

We don't -- it's too early for us right now to see 2020 picking up. I do think we had some marginal improvement off of a bottom, but I would say that it's probably later than that. And to your point, we are actively working some of the synergy programs there.

Brian Chin -- Stifel, Nicolaus & Company, Inc. -- Analyst

All right, thank you.

Operator

We have a follow-up question from Harlan Sur with JPMorgan. You are now live.

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Yeah. Hey, guys. Thanks for taking my follow-up question. On the strong adoption of the Gen 5 wafer inspection platforms, I think it was originally targeted for sub-7 nanometer nodes, however. We keep hearing that customers are adopting Gen 5 for yield improvement even at some of the older nodes, and we also hear that Gen 5 has been adopted earlier by the memory guys. And then you also have EUV print check as another use case. So how much of these types of buyers are driving the strength in shipments this year versus the real leading-edge development activities?

Richard P. Wallace -- President and Chief Executive Officer

We haven't thought about in those terms. I'd probably say half and half, though. If I thought about it, it's broad use in development. I think what happens and especially since we make improvements to it and drive the productivity of the tool up, then it starts to be competitive in terms of cost of ownership with some applications for Gen 4, but a lot of this, as you might imagine, the discovery aspect of a new product is you're not really sure what it's going to find and what value it's going to create.

So now what we're seeing is significant value, as you say, even in some maybe more traditional places. And frankly what we originally expected was in some places people might have tried to deploy e-beam inspection. They get away from that by leveraging the much higher throughput of the optical platform. So we kind of see it broadening and feel very good. It took us little while, but we feel very good about the progress there.

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

I think as customers are seeing more and more demand, more and more activity at these other nodes, too, that that's driving the -- driving more yield challenges. And so now the tool is faster and so the debugging challenges they're having even at prior nodes now using the Gen 5 capability, to Rick's point, you have a whole bunch -- whole lot of headroom add -- that enables customers to use that tool for full wafer coverage type yield analysis that didn't exist without the Gen 5 product line out there. So given the demand there and how much activity is happening across new designs at those nodes, you're seeing more debugging that's happening there as well.

Richard P. Wallace -- President and Chief Executive Officer

So, just one last dynamic. I think you may know, but what a lot of customers do is it takes them a while to prove out the capability of the tool before they release it even internally for broad use. And so what we've seen in the last couple quarters is we've kind of broken through at some critical places where they have broader ability now to deploy outside of the first people we're just evaluating. And so that really opens up a number of use cases, and hence the significant progress in Gen 5.

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Yeah. Thanks for the insights.

Ed Lockwood -- Senior Director, Investor Relations

Thank you, Harlan. That's all the time we have for today's call. Jerome, if you would conclude the call with the final commentary.

Operator

[Operator Closing Remarks]

Duration: 55 minutes

Call participants:

Ed Lockwood -- Senior Director, Investor Relations

Richard P. Wallace -- President and Chief Executive Officer

Bren D. Higgins -- Executive Vice President and Chief Financial Officer

John Pitzer -- Credit Suisse Securities (USA) LLC -- Analyst

Harlan Sur -- JP Morgan Securities LLC -- Analyst

Timothy Arcuri -- UBS Warburg LLC -- Analyst

Krish Sankar -- Cowen & Co., LLC -- Analyst

CJ Muse -- Evercore Group LLC -- Analyst

Vivek Arya -- BofA Securities, Inc. -- Analyst

Joe Quatrochi -- Wells Fargo Securities LLC -- Analyst

Quinn Bolton -- Needham -- Analyst

Sidney Ho -- Deutsche Bank Securities, Inc. -- Analyst

Brian Chin -- Stifel, Nicolaus & Company, Inc. -- Analyst

More KLAC analysis

All earnings call transcripts

AlphaStreet Logo