Autodesk (ADSK) Q1 2022 Earnings Call Transcript

Autodesk (ADSK 0.29%)
Q1 2022 Earnings Call
May 27, 2021, 5:00 p.m. ET

Contents:

• Prepared Remarks
• Questions and Answers
• Call Participants

Prepared Remarks:

Operator

Good day, and thank you for standing by. Welcome to the Autodesk, Inc. Q1 2020 earnings conference call. At this time, all participants are in a listen-only model.

After the speakers' presentation, there will be a question-and-answer session. [Operator instructions] Please be advised that today's conference is being recorded. [Operator instructions] I would now like to hand the conference over to your speaker today, Simon Mays-Smith, VP, investor relations. Please go ahead.

Simon Mays-Smith -- Vice President, Investor Relations

Thanks, operator, and good afternoon. Thank you for joining our conference call to discuss the results of our first quarter of fiscal year 2022. On the line with me are Andrew Anagnost, our CEO; and Debbie Clifford, our chief financial officer. Today's conference call is being broadcast live via webcast.

In addition, a replay of the call will be available at autodesk.com/investor. You can find the earnings press release, slide presentation, and transcript of today's opening commentary on our investor relations website following this call. During the course of this call, we may make forward-looking statements about our outlook, future results, and related assumptions, acquisitions, products, and product capabilities and strategies. These statements reflect our best judgment based on currently known factors.

Actual events or results could differ materially. Please refer to our SEC filings, including our most recent Form 10-K for important risks and other factors, including developments in the COVID-19 pandemic and the resulting impact on our business and operations that may cause our actual results to differ from those in our forward-looking statements. Forward-looking statements made during the call are being made as of today. If this call is replayed or reviewed after today, the information presented during the call may not contain current or accurate information.

Autodesk disclaims any obligation to update or revise any forward-looking statements. During the call, we will quote a number of numerical growth changes as we discuss our financial performance. And unless otherwise noted, each such reference represents a year-on-year comparison. All non-GAAP numbers referenced in today's call are reconciled in our press release or Excel financials and other supplemental materials available on our Investor Relations website.

And now I will turn the call over to Andrew.

Andrew Anagnost -- Chief Executive Officer

Thank you, Simon, and welcome, everyone, to the call. I hope you and your families remain safe and healthy. Now while parts of the world emerge from the pandemic, others are entering the eye of the storm. I especially want to acknowledge our colleagues, family, and friends in India.

We are thinking about you, and we are helping wherever we can. Thank you to all our employees and their families, our partners, and customers for their continued resilience, patience, and commitment. Our first quarter marks an important inflection point. While solid execution, a resilient subscription business model, and continued secular shift to the cloud underpinned our strong first-quarter results, weighing uncertainty and growing confidence in our end markets generated momentum.

Robust growth in new product subscriptions, combined with improving usage and renewal rates, accelerated billings and RPO growth to 10% and 22%, respectively. Together, these reinforce our confidence that we are through the revenue growth trough and on track to achieve our fiscal '22 and '23 goals. In mid-May, we completed the acquisition of Upchain, a cloud-native product data and life cycle management solution. Combined with existing Autodesk offerings like Fusion 360, Upchain will profoundly simplify data sharing and collaboration for engineers, manufacturers, suppliers, and other product stakeholders, enabling customers to bring products to market faster and build a stronger supply chain.

Its next-generation platform enables it to be rapidly deployed, scaled, maintained, and updated without the expensive inflexible, and time-consuming integrations of legacy systems. We will grow Upchain through our enterprise and channel partnerships and expect it to become a meaningful on-ramp for legacy design tools to the Fusion 360 cloud ecosystem and facilitate further expansion into adjacent verticals. As we highlighted in our recently published Impact Report, the convergence of design and make brings both greater efficiency and sustainability to buildings in a broad range of manufactured goods, stretching from EVs and bicycles to high-performance skis and low-cost ventilators. While we are enabling customers to achieve their sustainability targets, we continue to lead by example, reaching our carbon-neutral goal across our business and value chain in fiscal '21.

The report also sets out new diversity, equity, and inclusion goals. And while I'm proud that 50% of Autodesk Board and 45% of our executive team are women, we can and will do more both internally and through partnerships with organizations like IFF Labs externally. As we recently announced, Pascal Di Fronzo, Autodesk's executive vice president of corporate affairs and chief legal officer, will be retiring in December after 23 very successful years at the company. He has been a trusted counselor and steward of the company.

His contributions to Autodesk are many and have been incredibly impactful, and I want to thank him for his dedication and wish him all the best in retirement. I am very excited to welcome Debbie back to Autodesk, and will now turn the call over to her to take you through the details of our quarterly results and guidance for the year. I will then come back to provide an update on our strategic growth initiatives.

Debbie Clifford -- Chief Financial Officer

Thanks, Andrew. I'm very excited to be back. Looking at the first quarter's results, several factors contributed to our strong financial performance, including robust growth in new product subscriptions, accelerating digital sales, stronger-than-expected upfront revenue, and improving subscription renewal rates. In addition, a one-month contribution from Innovyze and foreign exchange rates provided a modest tailwind to the quarter.

Total revenue in the quarter grew 12% and 11% in constant currency, with subscription revenue growing by 18%. Looking at revenue by product and geography, AutoCAD and AutoCAD LT revenue grew by 9%. AEC revenue grew 16% and manufacturing revenue grew 8%. Excluding the impact of moving our bulk product to ratable revenue recognition, which we discussed last quarter, manufacturing revenue grew double digits.

M&E revenue grew 5%. Across the globe, revenue grew 8% in the Americas, 11% in EMEA, and 20% in APAC. Direct revenue increased 25% and represented 33% of our total revenue, up from 30% last year due to strength from both enterprise and e-commerce. Our e-commerce sites had their highest new billings growth rate in two years, driven by strong traffic growth and recent site enhancements.

Reflecting the business-critical nature of our products to our customers, our net revenue retention rate remained within the 100% to 110% range, and our product subscription renewal rates strengthened. Our billings accelerated 10% to $974 million. Total deferred revenue grew 11% to $3.35 billion. Short-term deferred revenue increased 17%, primarily reflecting growth in new product subscriptions and increasing renewal rates, but also the inclusion of Innovyze.

This was partly offset by a smaller contribution from long-term deferred revenue, resulting from fewer multiyear contracts when compared to last year. Total RPO of $4.23 billion and current RPO of $2.86 billion both grew 22%. Current RPO growth was primarily driven by the increase in short-term deferred revenue, but also by strong growth in enterprise business agreements and, to a lesser extent, early renewals ahead of anticipated price increases. Excluding the contribution from early renewals and Innovyze, current RPO grew approximately 20%.

Non-GAAP gross margin and operating margin remained strong at 92% and 28%, respectively, broadly level year over year and reflecting the trough in revenue growth relative to cost growth. We delivered healthy free cash flow of $316 million during the quarter, driven by collections of prior-quarter billings and strong results in the current quarter. Consistent with our capital allocation strategy, we continued to repurchase shares with excess cash to offset dilution from our equity plans. During the first quarter, we purchased 515,000 shares for $143 million at an average price of approximately $277 per share.

Now I'll shift to giving you my initial thoughts as CFO and then finish with our outlook. Since I rejoined Autodesk about two months ago, I've been focused on two things: first, reacquainting myself with everything Autodesk, the team, our strategy, and how we've evolved during my two years away; and second, I've been digging deep to gain a solid understanding of our fiscal '22 budget and fiscal '23 financial goals. On the first point, while much at Autodesk is familiar to me, I've been pleasantly surprised by how much has changed for the better, reflecting the enormous progress Autodesk has made over the last two years. Autodesk has undergone a cultural revolution.

There's been a powerful shift in the company's values and ways we work, and the pace of decision-making has accelerated. As a company, we now benefit not only from the scale of our operation, but also from a newfound agility that is enabling our success in newer markets like construction and manufacturing in the cloud. I'm also struck by the compelling and expanding opportunities ahead of us. Digital transformation is happening now, it is real, and we are well-positioned to capitalize on that trend in the industries we serve.

As I begin to turn my attention to our long-range financial plan, these initial learnings give me confidence in our growth potential in fiscal '24 and beyond. Let me finish with our guidance, which now includes Innovyze and Upchain. We still expect that an improving economic environment during the year will result in strong growth in new business over the course of fiscal '22. We expect product subscription renewal rates to continue to be healthy and our net revenue retention rate to remain between 100% and 110%.

Given our subscription model, revenue growth will lag the improving sales environment. We continue to expect about three quarters of our free cash flow to again be generated in the second half of the year due to our economic phasing assumptions and normal seasonality. For fiscal '22, we are raising our full-year revenue guidance to a range of $4.305 billion to $4.385 billion or a 14% to 16% increase over last year, reflecting a partial year contribution from acquisitions, net of the deferred revenue writedowns. Given our results are weighted in the second half and Q1 is our seasonally smallest quarter, it's obviously too early to change our view on the underlying trajectory of the year, but we're off to a good start.

We expect non-GAAP operating margin to expand to between 30% and 31%, which includes approximately 1 percentage point of negative headwind from acquisitions. Finally, we still expect free cash flow to be around $1.6 billion with a broadly neutral impact from acquisitions. The slide deck on our website has more details on modeling assumptions for the second fiscal quarter and full-year '22. With improving economic conditions and easier comparables, we still expect our first-quarter revenue growth will be the trough.

Our accelerating momentum in fiscal '22 will propel us into fiscal '23, and I am therefore confident in our fiscal '23 revenue growth potential and free cash flow target of $2.4 billion. As I begin to look beyond fiscal '23, the digital transformation of the industries we serve, our sustained investment in the cloud, and our flexible business model give us a robust platform for double-digit growth. Andrew, back to you.

Andrew Anagnost -- Chief Executive Officer

Thank you, Debbie. Let me finish by giving you an update on our strategic growth initiatives. The secular trends we have been investing in for years have accelerated during the pandemic: the digitization of AEC, the convergence of design and make and our expansion into adjacent verticals through organic investment and acquisitions are growing our total addressable market. The evolution of our business model, the value generated by the growing connectivity of our platform for new and legacy customers, and the hardening of our systems to noncompliant users enables us to attract, retain more of that potential opportunity, growing our ecosystem and the usage and value we generate from it.

Turning to AEC. Our unique vision is to connect all the phases of construction with end-to-end cloud-based solutions that combine horizontal data flow with best-in-class functionality to enable seamless collaboration from planning, design, preconstruction, construction, asset operations, and maintenance. The breadth and depth of our solutions distinguish us in the market, and we continue to build on that advantage to industry-leading R&D, which we sustain through the pandemic and acquisitions. Our latest product releases reflect that.

For example, Revit 2022 is a bridge to more open and interoperable ways of working that accelerate our design customers' digital transformation and improve communication design intent across all disciplines and project phases. For construction teams, we released Autodesk Build, Autodesk Takeoff, and Autodesk BIM Collaborate, as well as product enhancements, which further empower construction teams to drive better business outcomes such as winning more business, reducing rework, delivering projects on time, and improving safety by connecting data, workflows and teams across the project life cycle. As the construction backlog comes back online and the new project pipeline builds, we are emerging from the pandemic stronger. This is reflected in our success during the quarter.

For example, Burns & McDonnell is a family of companies bringing together an unmatched team of 7,600 engineers, construction professionals, architects, planners, technologists, and scientists to design and build critical infrastructure projects. It is at the forefront of technology use and having invested in Revit and BIM 360 design some time ago, most of its data is already in the cloud. Monthly active users, or MAUs, on Autodesk software have grown by 80% since 2018. This quarter, Burns & McDonnell renewed its Autodesk EBA and increased its investment with us, adding more cloud-based products from the Autodesk construction portfolio, including Autodesk Build, Pipe, Assemble, and BuildingConnected.

Our unified common data platform enables it to move and collaborate seamlessly from design through construction and to implementation with common workflows across multiple global practices. 1898 & Co., part of Burns & McDonnell, is its future-focused consulting and technology solutions division, and it is a founding participant in our Tandem digital twin programs. The Vault company is a $1 billion professional construction services firm in the U.S., focusing on integrated delivery of complex vertical construction projects that require extremely tight collaboration between stakeholders and integrated workflows between industry partners, the office, and seals. Vault was already relying on BIM Collaborate Pro and PlanGrid when, this quarter, it selected Autodesk Build over a directly competitive construction project management solution and also invested in Pipe.

Autodesk Construction Cloud's unified platform connects previously siloed data, reduces rework, and saves time for Vault across the company, enabling teams to easily manage projects from planning and design through to the field and handover. And MultiGreen, a real estate development and operating company specializing in sustainable and tech-enabled multifamily housing in high-growth and supply constrained markets, standardized on Autodesk Construction Cloud. In order to build more efficiently and sustainably, they knew they had to standardize on a single platform to connect their teams from concept and design through project completion and day-to-day operations. In addition to Revit, Inventor, BuildingConnected, Autodesk Takeoff, and Autodesk Build, they will be using BIM 360's integration with the Embodied Carbon Calculator to analyze material carbon emissions with all their data connected through our common data environment.

In infrastructure, we released Civil 3D, InfraWorks, and AutoCAD MAP 3D and AutoCAD Plant 3D, and ReCap Pro with enhancements in transportation, water, plant, land development, and reality capture. Most importantly, we continue to mature our project delivery platform across design and construction to better support digital project execution that helps our customers increase operational efficiencies, make better design decisions, increase quality and reduce cost and material waste. During the quarter, we received notice of an award and design from the Montana Department of Transportation. Instead of a competitor offering, they will be using our AEC collection, which includes Civil 3D, Revit, InfraWorks, Navisworks ReCap, and our common data environment, Autodesk Docs.

The department was particularly impressed by connected bridge design workflows between Revit and InfraWorks that drive efficiency and sustainability. Turning to manufacturing. We have made significant organic investments in addition to Upchain. Inventor 2022 introduced new features and enhancements to speed up product development and interoperability with AutoCAD, Fusion 360, and Revit.

In Fusion 360, we have introduced new functionality across the entire product development process and numerous integrated extensions that unlock advanced design and manufacturing technologies. In Vault, we introduced a new mobile application and web browser experience for engineers and non-CAD users to access their real-time data anywhere and on any device. The potential to converge design and make in the cloud is becoming more of a reality every day to our customer. Autodesk continues to lead that transition.

AEC Technologies, the world's leading solutions provider for smart devices, grew its investment with Autodesk. Having struggled with data management and data integrations in their product life cycle management using a competitor's 3D modeling product, AEC Technologies switched to our product design and manufacturing collection with Vault to manage all their data. They found our connected workflows particularly attractive and believe they will improve productivity and collaboration across their teams and enable them to go to market more effectively by increasing flexibility in their supply chain. For data management, our customers can now choose Vault for on-prem and Upchain as they transition to the cloud.

With the largest number of new commercial users in 2020, Fusion 360's strong momentum continued, growing commercial subscriptions to 152,000 without any systematic cost promotions. While still early in its life cycle, we believe Fusion 360 has reached an adoption tipping point. And with extensions and Upchain, we are excited about its future. During the quarter, a U.K.-based design, manufacturing, and installer of architectural precast design invested in Fusion 360 in its nesting and fabrication extension.

By converting the design and manufacturing process into a single unified experience in the cloud, Fusion 360 enables faster design, prototyping, and go-to-market. By creating optimized and associative multi-sheet layouts for sheet metal and non-sheet metal parts in preparation for cutting on CNC machines, our nesting and fabrication extension helps them to significantly reduce waste. Last month, three students from Danville Community College in Virginia won the inaugural Project MFG National Championship, an advanced manufacturing competition sponsored by the U.S. Department of Defense.

Jeremiah Williams, Director for Integrated Machining Technology at Danville Community College said that, "By testing a variety of advanced skills like welding and multiaccess machining, as well as communication and teamwork, the Project MFG National Championship is one of the most challenging skilled trade competitions in the country. Fusion 360's next-generation platform enabled our team to complete all required and optional objectives from prototype through to welding and machining the finished product and to win this prestigious prize." As announced last quarter, we expanded our multiuser trade-in to August 2023, but we are still seeing customers convert and benefit from kind of transition to named users. SSP, one of the leading integrated design offices in Germany, traded in their multiuser licenses with us this quarter and significantly increased their investment by purchasing additional AEC collections and premium subscriptions, in the process, may completely replace the competitive design solution, standardizing their workflow on our cloud platform. The premium plan is especially valuable to them as they improve their site-to-site management using single sign-on, which enables more digital collaboration and efficiency while increasing employee satisfaction.

While we continue to be sensitive as the economy recovers, we are successfully converting noncompliant users to paying customers with Q1 license compliance billings almost doubling year over year during the quarter. For example, a noncompliant client customer converted into one of our largest premium customers to date. Over 500 branches in Indonesia made it difficult to track and manage software usage, and this customer was inadvertently using more licenses than it was paying for. After completing a self-audit, which confirmed the software gap, it purchased premium to help manage the complex rollout of compliant licenses.

They are now a happy premium customer with detailed usage insights and the ability to flexibly manage their licenses from headquarters across their entire branch network. Now let me finish with a story. Construction began on Notre Dame Cathedral in 1163, but was not completed for more than 100 years. In a 12th century version of lightweighting, Notre Dame was the first Gothic structure to use flying buttresses, which are slanted beams that support the heavy walls and ceilings that enable giant rose glass and stained-glass windows in large edifices with open-air spaces beneath them.

Following a catastrophic fire in 2019, the cathedral is being rebuilt with traditional and sustainable materials enhanced by next-generation building information modeling provided by Autodesk. Combining traditional design and build know-how with modern workflow solutions, reconstruction is expected to be completed in 2024 in time to welcome athletes at the Summer Olympics in Paris and future generations from across the globe. I share this because as the world rebuilds after the catastrophic impact of the pandemic, I am reminded again that Autodesk's purpose to enable its customers to build and manufacture efficiently and sustainably has never been more important or urgent. Together, we can meet the generational challenges posed by carbon, water, and waste.

Autodesk's central role in meeting these challenges underpins my confidence this year and my confidence in the future. With that, operator, we would like to open the call up for questions.

Questions & Answers:

Operator

Thank you. [Operator instructions] Our first question comes from the line of Jay Vleeschhouwer from Griffin Securities. Your line is now open.

Jay Vleeschhouwer -- Griffin Securities -- Analyst

Thank you. Good evening, Andrew and Debbie. Let me ask you, Andrew, first, a couple of business and technology or technology evolution questions. You highlighted infrastructure.

And the company has been in that business for many, many years, and you'll recall that once upon a time, was, in fact, a reporting segment and maybe should be again at some point. Could you describe the main ways in which that business has evolved over the last number of years in terms of its scope or its customer base? And what the vision really is for that business in terms of perhaps adding new types of customers, such as owner-operators that have not really been a large part of your business profile to date. Secondly, since we're halfway between AU 2020 and AU 2021, could you update us on some of the important initiatives that you yourself highlighted during your Q&A session at AU six months ago, mainly the Forge roadmap and its implications for your long term, and secondarily, sharing technology across the portfolio and across industries. In other words, leveraging your R&D more and more across the company in that respect.

Andrew Anagnost -- Chief Executive Officer

Yeah. All right, Jay, so let me start with the infrastructure discussion. So here's what fundamentally staying with the business. One, we've been winning more and more departments of transportation as we've progressed since the last time the infrastructure business was broken out.

And what we did is we focused our organic portfolio very much on road and rail work, you know, bridges, roads and rails, and created a lot of workflows between Civil 3D and InfraWorks, and some of our specific tools. And we've been very happy with the progress we've been making there, and we continue that organic investment targeting those pieces of infrastructure. We don't feel it needs to be broken out into a separate business because, you know, I think you might recall, since those days, we've moved our entire sales organization to account-based sales, so it's very easy to cover these types of customers with the kinds of support that we need to engage with them directly. Look, water's next, as you can see with what we've been doing with Tandem and the digital twin work and also with what we've acquired with Innovyze with their Info360 solution and some of the tools around there with digital twins for waste management and water management.

We're definitely moving closer to things that are directly relevant to owner-operators. And I would -- you would expect to see us do more of that as time progresses, OK? So that kind of gives you a sense for what we're looking at and how we've gotten here. Now with regard to AU initiatives, I don't want to kind of, you know, pre-empt next AU's announcements. But what I'll tell you is, you know, we continue to add additional capabilities to forge into the APIs.

And I think this coming AU, you're going to hear me talk a lot more about some of the common experiences we're creating across some of our new environments that we're building through our various customers. So I want to hold on to some of that news as we move forward to the next AU. But, you know, the hint is there's some common data experiences. There's some common ways of managing and accessing projects that we're developing and deploying, all things that are relevant to making the platform more powerful for bringing together the various products that our customers use.

Jay Vleeschhouwer -- Griffin Securities -- Analyst

OK. For Debbie, quickly. You highlighted strong growth in product subs. If you're able to look at that in absolute terms, how would that product subs' level of business compare with, let's say, the second and third quarter of last year and perhaps even the fourth quarter? Are you at now perhaps the highest level you've been in four or five quarters as far as product subs are concerned?

Debbie Clifford -- Chief Financial Officer

The short answer is yes. We've returned to growth after a period of several quarters that were impacted by COVID. And so we're pleased with the growth that we saw in Q1, and that's evidenced in the revenue results.

Jay Vleeschhouwer -- Griffin Securities -- Analyst

Thank you.

Operator

Thank you. Our next question comes from the line of Saket Kalia from Barclays. Your line is now open.

Saket Kalia -- Barclays Investment Bank -- Analyst

OK. Great. Can you hear me OK?

Debbie Clifford -- Chief Financial Officer

Yeah. 

Saket Kalia -- Barclays Investment Bank -- Analyst

Excellent. Excellent. Thanks so much for taking my questions, and welcome, Debbie. Maybe first for you, Andrew.

I'd love to dig into the new business acceleration you've touched on as we are starting this recovery. You know, maybe in particular, how much of this recovery do you feel is in demand, that is do you feel is tied to increased engineering hiring versus perhaps pent-up demand for tools post-pandemic, just as we kind of think about the pace of this recovery going forward? Does that make sense?

Andrew Anagnost -- Chief Executive Officer

Yeah. It's hard for me to break it down into increased engineering hiring versus kind of pent-up demand. So I really -- I can't really give you a fine grain view on that. What I can tell you is that usage of some of our more engineering-intensive products is going up pretty significantly, OK? And, you know, we talked a lot about usage every year with regards to how the monthly active users and the daily active users is going in various countries.

What we've seen is the majority of our countries are now at or above pre-COVID levels. The U.K. is now above pre-COVID levels. The U.S.

still struggling a little bit to get above pre-COVID levels, but showing a lot of robust impact. You also noticed -- I think you probably watched the indexes out there, the PMI and the ABI indices, in particular. We have always found those indices to be lagging indicators of our business. So they actually tell us that something has already happened with the purchasing behavior of our customers.

And what you've seen is those indices continuing to shift toward growth, which you hint at, Saket, that it's the book of work that's going up, all right, which means people are going to hire more engineers, they're going to hire more people and they're going to engage -- they're going be using our products more. So it's probably driven mostly by hiring related to the book of business of our customers is going up. The indices seem to indicate that as a lagging indicator of what we've seen in terms of purchasing behavior and usage. But that's kind of as much granularity as I can give you on that.

Saket Kalia -- Barclays Investment Bank -- Analyst

No, that's super helpful, Andrew. Thanks. Maybe for a follow-up for you, Debbie. You touched on this a little bit in the prepared remarks, but I'd like to just talk about the acceleration in revenue this year.

I think we get some of the drivers, but I'd love to sort of get your take and perhaps as part of that, your confidence in that growth lasting into fiscal '23 and for that matter, remainder term as well.

Debbie Clifford -- Chief Financial Officer

Well, thanks, Saket. I'd start by saying, so Q1 is our seasonally smallest quarter. And our guidance assumes that we'll see improving results as the year progresses, which is consistent with what we're seeing. We're seeing uncertainty lessening, growing confidence from our customers and our channels, and improving demand in our end markets, which is resulting in accelerating growth in new business.

We're also seeing increasing renewal rates, strong direct business, particularly through the eStore. Our total direct revenue grew 25% year over year in Q1 and now represents 33% of total revenue. We're also pleased that we're starting to see momentum in key indicators like RPO, which grew 22% year over year in Q1. And it's because of these factors that we're confident in the ramp during fiscal '22.

Now if I shift attention to fiscal '23 and even beyond that, let me just break that down a little bit. I mentioned on the call that since I rejoined Autodesk, I've been focused on two primary things. The first is reacquainting myself with everything Autodesk, the team, the strategy, what's happened while I was away for a couple of years. And the second is digging deep to get a solid understanding of the fiscal '22 budget and our fiscal '23 financial goals.

It's because of that work that I see significant opportunities for growth, including a growing TAM, from things like accelerating digitization in AEC, the convergence of design and make in manufacturing, an expansion into adjacent verticals like you saw us do recently with the acquisition of Innovyze that got us into water infrastructure. We're also focused on further monetizing our TAM in a variety of ways. Some examples include conversion of noncompliant users. Andrew mentioned that billings from noncompliant users almost doubled year over year in Q1, and we're seeing more direct selling, as I just mentioned, and that direct selling gets us greater price realization that is another growth driver for us.

This is all against a macroeconomic backdrop that we see improving. And it's because of all of this that we're confident in our fiscal '23 revenue growth potential and the free cash flow target of $2.4 billion in that period. Now I've been back for 90 days, less than 90 days, actually. So next step for me is more work on the long-range financial plan and getting a deeper understanding of our path in fiscal '24 and beyond.

Our goal is to drive double-digit growth using some kind of rule of 40-type framework over time.

Saket Kalia -- Barclays Investment Bank -- Analyst

Very helpful. Thanks for your time, guys.

Operator

Thank you. Our next question comes from the line of Adam Borg from Stifel. Your line is now open.

Adam Borg -- Stifel Financial Corp. -- Analyst

Hey, guys, and thanks for taking the question. Maybe just on Upchain. So obviously, I know that just closed a few weeks back, but I was just curious if you could talk more about the vision over time of integrating Upchain with Fusion and Forge and how we should even think about the convergence of both Vault and Upchain, just given the similarities? Obviously, one's on-prem and one's in the cloud.

Andrew Anagnost -- Chief Executive Officer

Yeah. An excellent question, Adam. So as you know, Upchain is PLM and PDM, product data management, product -- and product life cycle management in the cloud. So it's a fully cloud-native application.

It's got both product data management and PLM. It understands both files and cloud information models like with Power Fusion, for example. Our vision for how this is going to work is Fusion already has a stack built on its cloud information model that goes all the way through simple data management up through into product life cycle management. Upchain will likely replace that capability within Fusion over time.

But more importantly, what Upchain does is it supports a whole swath of legacy applications from our competitors and from other places. So what we're going to do is we're going to go into accounts with legacy applications or where we see overlap with other applications and combine the Fusion stack and the Upchain stack to handle the whole swath of data our customers use. Now ultimately, as well, what we're going to do is we're going to integrate Upchain with Vault so that Vault can now have an extension to the cloud. We're not going to force our Vault users to move from on-prem to the cloud.

Vault is a very popular application. We sell a lot of it every quarter. And we're going to continue to update and maintain it. You might have noticed that we just released a mobile and extension to it and some web -- additional web extensions capability for Vault.

So we continue to drive Vault, but we are going to integrate Vault and Upchain over time, which will give our Vault customers a path to putting all their data in the cloud as they see fit to do it, but we're not going to force that migration. So look for it to replace the guts of Fusion life cycle over time and integrate with Fusion cloud information model and look for it to integrate with Vault over time and provide a path for Vault customers to the cloud. And then ultimately, look for us to be going after legacy systems with a combination of our Fusion offering and Upchain's capability to bring all the customers' data and all the applications the customer use together in one robust cloud environment.

Adam Borg -- Stifel Financial Corp. -- Analyst

That's great, Andrew. Maybe just a quick follow-up. Just on the Autodesk Construction Cloud. You cited some nice examples of some customer wins in the quarter.

Just as you think about that business over the course of the year, especially with the improving macro kind of where are you thinking -- how you're thinking about that business as the year progresses? Thanks so much.

Andrew Anagnost -- Chief Executive Officer

Yeah. So we have really high expectations for how that business progresses as the year progresses. And we're getting -- we're definitely getting some good indications. One of the things we watch are the bids -- the activity on bid board through our BuildingConnected service.

That activity has been going up in Q1. It's been progressively going up each month, which is great. So we see a lot of activity heading into there. Just like a lot of our businesses, we expect some of the new business to be back-end loaded.

But we're super happy with where we are right now. We had a good launch of Autodesk Build. It's getting good take-up in monthly active usage from some of our customers. New customers are embracing it.

Our international expansion efforts that we put on hold last year because of the pandemic are now moving into full year this year. Later this year, we roll out Autodesk Build to the channel, and that's going to accelerate Build's business. And, you know, one other thing I just want to highlight is why we're winning, OK, and why we continue to win business and why we're so incredibly confident about the future. Here's what customers tell us, right? The end-to-end solution that we offer, all the way from planning -- early planning to design to preconstruction to preconstruction planning to site execution, all the way to digital handoff to actual maintenance and operations of the asset, nobody has this, especially to the depths that we have in each one of those disciplines.

The other thing that people are really excited about is the deep integration with them and the fact that it's a BIM-native platform. It speaks BIM from the get-go. It will always speak BIM, and it's really good at it. This is driving more and more displacement of competitive solutions and accounts where we overlap.

And one of the other big things that we hear from customers is our business model flexibility, all right? Customers love that they can buy from us where they need to buy from us and how they need to buy from us, right? You know, if you need a project-based license, we've got it. If you need a consumption-based model, we got it. If you need a per-user model, we got it. We adapt and flex our business model to whatever the particular customer's needs are or their ecosystem's needs are, and we can do it anywhere in the world.

So if we're dealing with an international customer, they know that when they standardize on us, they can get everywhere with the solution we do. So that's why we're winning. That's why we're bullish as we move into the next year and why we're excited about the construction market becoming hot and active again. The digitization of this market, a multiyear trend, there's lots of opportunity for lots of people, and we're seeing lots of validation in the direction we're heading.

And I think it's going to be an exciting year for digital construction.

Adam Borg -- Stifel Financial Corp. -- Analyst

Great. Thanks, again.

Operator

Thank you. Our next question comes from the line of Joe Vruwink from Baird. Your line is now open.

Joe Vruwink -- Baird -- Analyst

Great. Hi, everyone. Maybe just to focus on Fusion 360. I think the first disclosure on commercial subs was about a year ago, and 152,000 of subs, about 80% since then.

Andrew, when you mentioned that business being at a tipping point or I think you might just say pass the tipping point, is it just a function of scale and customer awareness now that the product is as large as it is? Or are there other dynamics at play that you would point to as kind of supporting the business through this fiscal year?

Andrew Anagnost -- Chief Executive Officer

Well, you know, there's a lot of things. One, there's the increased interest in the cloud, all right? There's the simple network effect of people saying, "You know what, I displaced my Mastercam and SolidWorks with Fusion, you should try the two. It's awesome. So we're getting that network effect of people basically encouraging each other to move forward and get off the legacy systems and move to the cloud with Fusion.

So we're seeing some of that. We're also seeing -- and this is super important. We're seeing increased purchases within accounts we penetrated previously, which means we're moving from kind of being a niche solution inside these companies or maybe partially -- a piloted solution to production. And that's also an important driver.

And we expect these trends to continue this year and continue moving forward. You know, and one of the really exciting things about this is we talked about growth beyond FY '23 and in FY '24 and '25 and beyond. The early success we're seeing in Fusion right now is going to be a growth engine that continues to accelerate over the next five years, especially as we start introducing our new design -- our extensions. We already have one for advanced manufacturing.

We have various other extensions. There's going to be new extensions in the second half of the year. Those extensions continue to be out there. We're particularly excited that we sold more Fusion than other applications in Q1 without any type of promotional activity.

All of this points toward increasing customer demand for what we're doing.

Joe Vruwink -- Baird -- Analyst

OK. That's great. And then just on the comment that in regards to your construction end markets, uncertainty is lessening. I appreciate no sale is ever easy.

But are there things that become easier, the fact that license compliance billings seem to have had a good quarter, coinciding with a better backdrop? Is that something that accelerates as the year goes on? Or would you maybe point to other areas of your business as well?

Andrew Anagnost -- Chief Executive Officer

I'm sorry. Could you -- you went out a little bit for me on the last part of that. What -- the part of the question, what's the key point of the question here? Sorry.

Joe Vruwink -- Baird -- Analyst

With uncertainty lessening, license compliance and having those conversations seems like that could be one area to benefit. Are there other areas as well?

Andrew Anagnost -- Chief Executive Officer

Yeah. OK. So, you know, as I've said many times, license compliance is one of these areas that we're just going to build a steady drumbeat on, right? It's going to be the gift that keeps giving for years and years to come. We do not want to accelerate it unnaturally because we want to bring our customers along with us.

We want to keep them happy, help them get compliant. You noticed the story that I offered up in Indonesia about that customer actually buying premium subscription, as well as becoming compliant and being happy about how they were able to deploy it, that's the kind of outcomes we want from the solution. So we did see some acceleration. You saw the growth numbers in the opening commentary around noncompliant billings in Q1.

But that was off of a Q1 that was previously off. So we had a really strong compare. Don't expect any hockey sticks, though the Q1 of this year was better than the Q1 of fiscal '20. So you're seeing continued growth, which is what we want to see, a nice steady growth in this business.

But don't look for any hockey sticks this year. We're back to the path we were on previously. 

Joe Vruwink -- Baird -- Analyst

Great. Thank you very much.

Andrew Anagnost -- Chief Executive Officer

You're welcome.

Operator

Thank you. Our next question comes from the line of Matt Hedberg from RBC Capital. Your line is now open.

Matt Hedberg -- RBC Capital Markets -- Analyst

Well, great. Thanks for taking my questions. Andrew, I wanted to go back to the construction side again. Obviously, the cost of building just continues to go up from a materials basis.

And I know you guys have talked about the amount of waste globally that comes from construction site. Is that having a positive impact on pipeline generation as a lot of these construction firms, they just have to think end customers. They just have to become more way more efficient. Is that a portion of your pipeline growth there? 

Andrew Anagnost -- Chief Executive Officer

So, Matt, that's a very astute observation, all right? It's too early to say if the cost of -- the increases in the cost of material is driving increased focus on digitization. But it is one of those things that we have constantly highlighted as one of the reasons why the value chain for construction needs to digitize. Because when material prices have gone up the way they have, you can't afford to overpurchase and waste materials. So I can't tell you precisely if this is one of the pipeline drivers.

But I can tell you that we're mentioning it to customers, and we're having customers about, hey, conversation with customers who want to keep your material costs down, digitize, right? Plan for less waste. Only order what you need. So it's definitely entering into the conversation. I think it's too early to say if it's driving acceleration in the pipeline.

But I think it's likely that it is.

Matt Hedberg -- RBC Capital Markets -- Analyst

That's really great to hear. And then -- thank you for that. And then Debbie, welcome from me as well. I guess one of the questions that we always get, and I'm sure you get as well, you know, is sort of what gives you confidence in that kind of that hockey stick cash flow guide for fiscal '23.

Now that you had a little bit of time to kind of reflect on the model, what are sort of -- what's your sort of your view on some of the major drivers? I know we've heard Scott talk about them in the past. I'm just sort of curious on your perspective that gives you really that confidence that you seem -- it was clear in your remarks.

Debbie Clifford -- Chief Financial Officer

Yeah, sure. Matt, good to talk to you, too. It's -- in large part, it's a lot of the things that I mentioned before. I think it's this combination of a growing TAM, as well as further monetization of our TAM.

And so that continued digitization in AEC with more innovation in Revit with expanding BIM mandates and ongoing BIM proliferation around the world with the digitization of construction that Andrew just talked about. Even the infrastructure bill could be a wildcard for us. We're hopeful, although nothing is baked into our numbers at this point. But these are all the multiple growth drivers that give me confidence in the ramp.

I think some of the other data points that we have out there, I'll repeat because these are the things, frankly, that I've been looking at to get my own sense of confidence into that ramp into fiscal '23: the conversion of noncompliant users, the fact that those billings doubled in Q1, and we're seeing more success with that program; the fact that we are selling more direct, that's a driver of growth for us and ultimately, will translate to free cash flow over time; the improving macroeconomic backdrop. All of these factors combined are what give me confidence in our ability to achieve our revenue growth potential in fiscal '23, as well as that free cash flow number of $2.4 billion.

Matt Hedberg -- RBC Capital Markets -- Analyst

Thanks, Debbie.

Andrew Anagnost -- Chief Executive Officer

And Matt, I'll just reinforce some of the things that Debbie said because I don't think we can talk about this enough because -- did you notice the list of things she gave there, right? There's a whole set of horizontal things just around the normal business, the noncompliance, the new types of subscription models, the rollout of consumption, the accelerating growth in our end markets. All of that combined also with the strategic levers around digitization and AEC around the convergence of design and make of what we're seeing with Fusion and then the whole move into new adjacencies that we're doing. Any one of those things could contribute to viable long-term growth, we have all of those levers to pull, all right? I just want to remind you, we have all those levers to pull. And I guess, we're really good at picking and choosing the levers to pull when we need to pull them.

Matt Hedberg -- RBC Capital Markets -- Analyst

Sounds great. Thanks a lot, guys. 

Operator

Thank you. Our next question comes from the line of Sterling Auty from J.P. Morgan. Your line is now open.

Sterling Auty -- JPMorgan Chase & Co. -- Analyst

Yes. Thanks. Hi, guys. One housekeeping one to start.

Can you be specific in terms of what the contribution to the guide is from the acquisitions?  

Debbie Clifford -- Chief Financial Officer

Sure. Sterling, so the impact on the acquisitions was a one-point increase to our revenue guidance range on the year, a one-point decrease to our operating margin range on the year, and it was neutral to free cash flow. That's consistent with what we said on the last call. 

Sterling Auty -- JPMorgan Chase & Co. -- Analyst

All right. Perfect. And then, Andrew, as we think going forward, is Fusion 360 always incremental to kind of the installed base of traditional seats? Or have you already started to see a little bit of conversion one to the other? And if that's the case, what kind of change does that have on kind of the ARR contribution?

Andrew Anagnost -- Chief Executive Officer

Yeah. So nobody is moving from Inventor to Fusion right now, OK? It's just not happening, all right? It's actually, most of the business is about going after incremental seats inside of competitive accounts, say, especially down market. The one great thing about our strategy is most of the Inventor is bought through collections, which includes Fusion. So if an Inventor user does start to move to Fusion over time, they continue on the same subscription path we're doing.

And what we'll do with our collections is some of the extensions that would be available to a vanilla Fusion user that they'd have to pay for would be included with the collections version. So essentially, what you see is a kind of an ASP-neutral conversion from Inventor to Fusion. But that's going to take a long time. Most of the Inventor customers are going to stay comfortably where they are.

But when they do move, it's essentially ASP-neutral in terms of impact on our ARR. It doesn't change the ARR trajectory. 

Sterling Auty -- JPMorgan Chase & Co. -- Analyst

Excellent. Thank you.

Operator

Thank you. Our next question comes from the line of Jason Celino from KeyBanc Capital. Your line is now open.

Jason Celino -- KeyBanc Capital Markets -- Analyst

Great. Thanks for taking my questions. Maybe one, the ambitions in infrastructure. Andrew, you talked about the gains in roads and bridges with improvements to Civil 3D and expansions in the water here.

But how do you think about some of those other areas of infrastructure, maybe some like -- with some of the electric utilities or other areas?

Andrew Anagnost -- Chief Executive Officer

Yeah. So right now, Jason, we're going to stay focused on road and rail and bridges and the things that go along with road and rail and water. That's going to be our focus area. There's a lot of exciting things happening with elastic grid designs and the electrification and things associated with that.

We're not going to be focusing on that right now. We may in the future. But right now, if you look at -- even if you look at where the infrastructure bill is going, for instance, most of it is going to the upgrading and expanding the deteriorating infrastructure we have in the company around road, rail, bridges, civil and water infrastructure. And that's going to be our sweet spot for the fulfillment wins in that respect.

Jason Celino -- KeyBanc Capital Markets -- Analyst

And then, you know, you also talked about the -- why Autodesk wins in construction, which was quite helpful. You also alluded to the digitization opportunity there just being more broadly bigger. Maybe can you talk about how much of that TAM might be coming from pure greenfield versus displacements of legacy or in-house or other competitor tools? Thank you.

Andrew Anagnost -- Chief Executive Officer

Yeah. A lot of the TAM is greenfield. You know, really sometimes what you're competing with here is some kind of free tool and Excel spreadsheet or a lack of any digital process whatsoever beyond email and PDFs, right? So I -- there's a lot of greenfield opportunity here in addition to kind of just flipping existing customers off of legacy systems or consolidating their systems. So this -- there is a very robust long tail of growth here that's going to go on for years.

That's why it's so exciting to see all the activity in this space because it's going to take a village to digitize this entire market. And we're at the very, very early stages of this, which is great.

Jason Celino -- KeyBanc Capital Markets -- Analyst

Great. Appreciate the color. Thank you.

Operator

Thank you. Our next question comes from the line of Gal Munda from Berenberg. Your line is now open.

Gal Munda -- Berenberg Capital Markets -- Analyst

Hi, Andrew. Hi, Debbie and the team. Thanks for taking my questions. The first one, Andrew, maybe just a little bit on construction.

Your construction portfolio has really expanded and it's very, very strong now. I'm just wondering how should we think about the individual brands that you acquired between, you know, PlanGrid, Assemble, BuildingConnected, Pipe on one side, and then Autodesk Construction Cloud on the other side in terms of user adoption. And do you see users that came in for individual brands now starting to kind of move toward the platform approach as well?

Andrew Anagnost -- Chief Executive Officer

Yeah. It's an excellent question, Gal. So as you know, Gal, Autodesk Build, and the Construction Cloud, in general, is the unification of all those brands and it's where we lead with new customers. Absolutely.

You know, when we're going out there chasing new businesses, Autodesk Build, it's all the capabilities that are built into Autodesk Build. It's Autodesk Takeoff. It's all of those tools associated with the Construction Cloud. And that's where we lead.

But we're also seeing people migrate off of the individual brands and move forward, right? So we're seeing the same kind of thing happening incrementally. But that's not -- we're going to let those people move at their own pace. Right? So when they're choosing to move on to the consolidated cloud, they're doing that by choice and as part of a process. Over time, we will ultimately migrate all of them to Construction Cloud and Autodesk Build.

But right now, we're leading with our new customers with Autodesk Build and helping customers consolidate on the Autodesk Build when they want to bring some of those old brands along with them. But all the best technology from all those brands is in the Construction Cloud now.

Gal Munda -- Berenberg Capital Markets -- Analyst

Understood. Thank you. And maybe, Debbie, just another question for you. I completely understand that Q1 is the smallest quarter in terms of new business generation and in terms of the renewals as well.

So what I wanted to touch, though, is it might not have been a good time to kind of organically think about raising the guidance for the year so early in the year. I'd like to just kind of take a step back and think about what happened during Q1 and what you're seeing so far in Q2. If that kind of level of trading and recovery continues, is it fair to say that you feel pretty confident about your full-year guidance then?

Debbie Clifford -- Chief Financial Officer

I mean, we issued the guidance today that we feel comfortable with. And I would say that we certainly have a strong sense of optimism based on the results that we had in Q1. But it's just too early for us to change the underlying view on the year after only one quarter, but we're off to a good start.

Gal Munda -- Berenberg Capital Markets -- Analyst

Gotcha. Thank you.

Operator

Thank you. That is all the time we have for Q&A today. I would like to turn the call back over to Simon Mays-Smith for closing remarks.

Simon Mays-Smith -- Vice President, Investor Relations

Thank you, everyone, for joining us. I look forward to chatting to you next quarter, updating you on our performance. If you have any questions in the meantime, please just PM me directly, happy to answer your questions. Thanks very much.

Operator

[Operator signoff]

Duration: 62 minutes

Call participants:

Simon Mays-Smith -- Vice President, Investor Relations

Andrew Anagnost -- Chief Executive Officer

Debbie Clifford -- Chief Financial Officer

Jay Vleeschhouwer -- Griffin Securities -- Analyst

Saket Kalia -- Barclays Investment Bank -- Analyst

Adam Borg -- Stifel Financial Corp. -- Analyst

Joe Vruwink -- Baird -- Analyst

Matt Hedberg -- RBC Capital Markets -- Analyst

Sterling Auty -- JPMorgan Chase & Co. -- Analyst

Jason Celino -- KeyBanc Capital Markets -- Analyst

Gal Munda -- Berenberg Capital Markets -- Analyst

More ADSK analysis

All earnings call transcripts